Shenzhen Minghan Technology SLIWIR004 Wireless IR Repeater System Kit Instruction Manual
- June 13, 2024
- Shenzhen Minghan Technology
Table of Contents
Shenzhen Minghan Technology SLIWIR004 Wireless IR Repeater System Kit
Product Information
- The device is designed to comply with Part 15 of the FCC Rules, ensuring it meets the standards for electromagnetic interference. It operates under two conditions: (1) it should not cause harmful interference, and (2) it must accept any interference it receives, even if it results in undesired operation.
- It is important to note that any changes or modifications made to the device without express approval from the responsible party for compliance may void the user’s authority to operate the equipment.
- The equipment also complies with FCC radiation exposure limits for an uncontrolled environment. It is recommended to install and operate the device with a minimum distance of 20cm between the radiator (device) and your body to minimize radiation exposure.
Product Usage Instructions
- Ensure the device is placed in an area with proper ventilation and away from any potential sources of interference.
- Do not make any changes or modifications to the device that are not expressly approved by the responsible party for compliance.
- When installing the device, maintain a minimum distance of 20cm between the radiator (device) and your body. This will help reduce radiation exposure.
- Connect the device to a suitable power source using the provided power cable.
- Follow the specific instructions for operating the device as outlined in the user manual.
- If any interference is experienced during operation, such as disruptions or undesired behavior, try adjusting the position of the device or removing potential sources of interference nearby.
- If you encounter any issues or have questions regarding the device’s operation, refer to the troubleshooting section in the user manual or contact customer support for assistance.
- When not in use, it is recommended to turn off the device and unplug it from the power source to conserve energy and prevent any potential hazards.
Thanks for buying ENSIGEAR Wireless IR Repeater System, with it you extend the IR(infrared) signals of a remote control.This IR Repeater system makes it possible to control multiple devices while these are in a closed cupboard or in a remote location out of sight . Your components may now be mounted in your entertainment center system cabinet, closet or another room! An ideal solution for those who want to hide conceal their A/V components equipment such as AV receiver.DVD Blu-ray player, and satellite receiver set top box STB etc.
Features
- POWER:100 -240VAC 50/ 60 Hz 5V DC 500 mA
- IR Receiver connection: 1x 1/8″(3.5 mm Stereo Jack) input
- IR Emitter connection:1 x 3.5 mm jack plug
- Receive/ Transmit Frequency range : 20 KHz to 60 KHz
- Length of Receiver/ Transmit cable : 2 meters (6 .6 ft)
- Color: Black
- Warranty: 12 months
Package Contents
- 1x Transmitter Block
- 1x Receiver Block
- 2x IR Emitters
- 1x Mini IR Receiver
- 2x Power Supply
About this item
- For remote control of hidden equipment without cable connection (for example, remote control of equipment in room B with infrared remote control in room A):
- Wireless distance: Greater than 200 m (6 50 ft), distance may vary due to obstacles.Can overcome obstacles such as multiple walls and doors;
- ENS I GEAR Wireless IR Repeater Kit is the ideal solution for large homes or multi-story homes;
- In the picture details there are illustrations of different usage scenarios, please look carefully ;
Note:
Products with electrical plugs are designed for use in the US. Outlets and
voltage differ internationally and this product may require an adapter or
converter for use in your in your destination. Please check compatibility
before purchasing.
Package Contents
Appllcation scenario 1
Application scenario 2:
Application scenario 3:
[Wlreless signals pass through multlple walls]
FCC
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation
NOTE : This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning : changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
Radiation Exposure Statement
- This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
- This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.