Jaycar GT4300 Dancing Santa Bluetooth Speaker Instruction Manual

Jaycar GT4300 Dancing Santa Bluetooth Speaker

Product Usage Instructions

• Bluetooth Connection
  • Press and hold the [ >II] button for 2 seconds & release the button when the unit turns on.
  • The speaker light will light up blue & flash to indicate it is in pairing mode. Use Bluetooth on your mobile to find the device named GT4300.
  • Select GT4300 to begin the pairing process. The indicator will cease flashing & the speaker will emit a beep tone to indicate the pairing was successful. If the connection is not successful, please turn off the speaker and start the process from step 1.
• Play Music / Answer Calls
  • When the speaker is connected to the Bluetooth device, press the [ >II] button shortly or press the play button of the source device. The system will begin playing music. To pause the music, tap the button again.
• Answer incoming calls
  • There is a call indication sound when the incoming call sounds, short press the [ >II] button to answer the call. Press again to end the call.
• Redial phone number
  • When the speaker is switched on, press the [ >II] key shortly twice and the system will automatically re-dial the last phone number.
• Turn off the speaker
  • Press the [ >II] button for 2 seconds to turn off the speaker. The blue light will turn off after a short beep tone is emitted.
  • When the power is low, the speaker will automatically turn off.
• Charging
  • Use the USB cable to connect to the speaker. A red light will indicate the device is charging. When the red light goes out is fully charged.

FAQs

• Q: Can this product be used by children?
  • A: No, this product is not suitable for children under the age of 3.
• Q: What should I do if I encounter text errors in the manual?
  • A: Please contact our customer service centre for assistance.
• Q: How do I enable or disable the dancing function?
  • A: Use the Dancing Enable/Disable Button to toggle the dancing function on or off.

PRODUCT DISCRIPTION

1. ON/OFF and Call Answer/End Button
2. USB Charge Jack
3. Dancing Enable/Disable Button
4. Microphone
5. Adjustable Arms
6. Dancing Legs
7. Speaker
8. TWS Support

Introduction

This manual has been carefully checked but does not rule out the possibility of a small number of text errors. If you find text errors, please feel free to contact our customer service centre. Read these operating instructions carefully before use and use the original supplied accessories. When the dancing function is operating, do not use your hand or other means to force the device to prevent normal operation to avoid unexpected damage.

Warning

THIS PRODUCT IS NOT A TOY AND IS NOT SUITABLE FOR CHILDREN UNDER THE AGE OF 3.

• Do not expose the speaker to water, fire, diluents or chemicals.
• Do not stop the dancing motion of the speaker by hand with force to avoid damage.
• Do not use the speaker close to magnetic fields and electricity.
• Do not use the speaker under direct sunlight or close to the heating apparatus.
• Do not try to disassemble, repair or modify the speaker yourself

Specifications

• USB charging input: 5V 500mA
• Charging time: 2 hours
• Speaker Specifications: Output: 3W
• Bandwidth: 70HZ– 20KHZ
• Sensitivity: 1K (85dB))
• Internal battery: 3.7V / 300mAh capacity
• Playback time: 2 hours
• Bluetooth version: V5.1
• Effective transmission distance: Up to 10 meters TWS Support

Operating Instructions

Bluetooth Connection

1. Press and hold the [ [>II ] button for 2 seconds & release the button when the unit turns on.
2. The speaker light will light up blue & flash to indicate it is in pairing mode. Use Bluetooth on your mobile to find the device named “GT4300”.
3. Select “GT4300” to begin the pairing process. The indicator will cease flashing & the speaker will emit a “beep” tone to indicate the pairing was successful. If the connection is not successful, please turn off the speaker and start the process from step 1.
   • Note: The speaker remembers the last connected device and will automatically connect to the last connected device when powered on.

TWS Connection – requires two Santa speakers

1. Turn on the two speakers by pressing the on/off button.
2. Wait 30 seconds until the light blue appears and the device emits a “beep” sound. The speakers will start blinking with a light in the TWS pairing state. Then the speaker will match automatically with a beep sound.
3. Follow the “Bluetooth Connection” instructions on page 4 to pair one of the speakers.

Play Music / Answer Calls

• When the speaker is connected to the Bluetooth device, press the [ [>II ] button shortly or press the play button of the source device.
• The system will begin playing music. To pause the music, tap the button again.

Answer incoming calls

• There is a call indication sound when the incoming call sounds, short press [ [>II ] button to answer the call. Press again to end the call.

Redial phone number

• When the speaker is switched on, press the [[>II ] key shortly twice and the system will automatically re-dial the last phone number.

Turn off the speaker

1. Press the [ [>II ) button for 2 seconds to turn off the speaker. The blue light will turn off after a short “beep” tone is emitted.
2. When the power is low, the speaker will automatically turn off.

Charging

• Use the USB cable to connect to the speaker. A red light will indicate the device is charging. When the red light goes out is fully charged.
• Please charge the battery in the off state to ensure the battery is fully charged.

Troubleshooting

The device won’t turn on.

• Please charge the speaker & try again.

Can’t be charged

• Please try to change the USB charging cable

The system stops & turns off

• Fully charge the speaker, and then re-pair it to your Bluetooth device.

WARRANTY INFORMATION

• Our product is guaranteed to be free from manufacturing defects for 12 Months.
• If your product becomes defective during this period, Electus Distribution will repair, replace, or refund where a product is faulty; or not fit for the intended purpose.
• This warranty will not cover modified products; misuse or abuse of the product contrary to user instructions or packaging label; change of mind and normal wear and tear.
• Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.
• You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage.
• You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and failure does not amount to a major failure.
• To claim a warranty, please contact the place of purchase. You will need to show a receipt or other proof of purchase.
• Additional information may be required to process your claim. Any expenses relating to the return of your product to the store will normally have to be paid by you.
• The benefits to the customer given by this warranty are in addition to other rights and remedies of the Australian Consumer Law with the goods or services to which this warranty relates.

This warranty is provided by:

• Electus Distribution
• Address 46 Eastern Creek Drive, Eastern Creek NSW 2766
• Ph. 1300 738 555

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>