Kolicazabebe 6614 Rocking Cradle Installation Guide
- June 25, 2024
- Kolicazabebe
Table of Contents
Kolicazabebe 6614 Rocking Cradle
INSTALATIONS GUIDE
ACCESSORIES LIST
PIECE INFORMATION
INSTRUCTIONS FOR ASSEMBLING
Instructions for use:
WARNINGS:
1. WARNING! Keep the product away from open flames or other sources of heat,
such as heaters, stoves…
2. WARNING! Do not use the crib or any other part of the product if it is
damaged or if parts are missing! Use only parts approved by the manufacturer!
3. WARNING! Do not leave anything inside or next to the crib, which could
provide support or pose a risk of strangulation and suffocation, e.g. Wire,
cables, fabrics…
4. WARNING! Do not use more than one mattress in a crib.
NOTICES:
1. The cot is ready for use, only when the locking mechanism is activated and
to carefully check that the cot’s overuses are fully activated.
2. The lowest position of the crib is the safest and should be used as soon
as the baby is old enough to stand up on its own.
3. If you leave your child unattended in the crib, always make sure that the
moving parts of the crib are tightly closed.
4. The thickness of the mattress must be such that the internal height
(surface from the top of the mattress to the upper edge of the crib) is at
least 500 mm from the lowest point of the bottom of the crib. 5. The maximum
thickness of the mattress must not exceed 120 mm
6. The width and length of the mattress should be such that the distance
between the mattress and the cot is not greater than 30 mm.
7. All mounting elements must always be properly tightened and all elements
must be regularly checked and tightened as necessary.
8. Maintain with a damp cloth, without using abrasives.
9. INJURY PREVENTION NOTICE: Once a child is able to climb up the crib on
their own, the crib is no longer safe for use!
Baby bed BELIS “4 DRAWERS” manufactured in accordance with the standard: SRPS EN 716-1:2019 716-2:2017
Product Specifications
- Product Name: (6614) – 60X120 KREVETAC SA 4 FIOKE (6614) -60X120 ROCKING CRADLE
- Dimensions: 60×120
- Material: Wood and metal
Product Usage Instructions
Step 1: Identify Parts
Refer to the provided accessories list to identify all the parts needed for assembly.
Step 2: Assembly
- Start by assembling the frame of the cradle using the specified screws and nuts.
- Attach the rocking mechanism securely to the frame.
- Install the side panels, ensuring they are properly aligned and secure.
- Attach the drawers as per the instructions provided.
Step 3: Final Touches
Once the assembly is complete, ensure all parts are tightened and secure. Check for any loose screws or connections.
FAQ
Q: How do I clean the rocking cradle?
A: Use a damp cloth with mild soap to wipe down the cradle.
Avoid harsh chemicals that may damage the finish.
Q: Can I disassemble the cradle for storage or transport?
A: Yes, you can disassemble the cradle following the assembly instructions in reverse order for easy storage or transport.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>