KONKA 32RR683TC Smart TV User Guide

: June 1, 2024
: KONKA

Table of Contents

32RR683TC Smart TV
Specifications
Product Usage Instructions
Set-up Requirements:
Safety Information:
Warnings:
Maintenance and Servicing:

32RR683TC Smart TV

“`html

Specifications

Model: KDG32RR683UN
Dimensions: 142x210mm
Smart TV
Quick Start Guide included

Product Usage Instructions

Set-up Requirements:

Read the Quick Start Guide before beginning Set-up.
Follow the provided Instructions carefully, paying attention to
all Warnings.
Avoid removing the TV back cover or blocking ventilation
openings.
Keep the TV away from water or heat sources.
Avoid pinching or cutting the Power Cord.

Safety Information:

Caution – Risk of Electric Shock:

This equipment is a Class II or double insulated device,
designed without the need for a safety ground connection.

Warnings:

Do not expose the TV to rain or moisture to prevent the risk of
fire or electric shock.
Avoid placing objects filled with liquids on the TV.
Follow manufacturer’s instructions for installation near heat
sources.

Maintenance and Servicing:

Servicing is required if the apparatus has been damaged in any
way or exposed to moisture.

FAQ

Q: What should I do if my TV is not turning
on?

A: Check the power source and ensure the power cord is connected
properly. If the issue persists, contact qualified service
personnel.

Q: Can I mount this TV on a wall?

A: Refer to the manufacturer’s instructions for wall-mounting
suitability and recommended procedures.

Q: How do I access Smart TV features?

A: Consult the user manual or navigate through the TV menu to
access Smart TV functions.

“`

KDG32RR683UN : 39091228 : : 2024-2-19 1004 GBOM KDG43RR683UN 1004 G1BOM
142x210mm : 70;

32RR683TC 43RR683TC
SMART TV
Quick Start Guide
Please read this manual carefully before TV operation. Retain it for future reference.

PREFACE
1. Read this Quick Start Guide before starting Set-up. 2. Then, carefully follow the Instructions, heeding all Warnings. 3. Do Not remove the TV back cover or block the TV ventilation openings. 4. Do Not use the TV near water or a heat Source. 5. Do not pinch or cut the Power Cord.
Note: The product and illustrations in this user’s manual is only for explanation purposes and may vary depending on model.
WARNING
Never place a television set in an unstable location. A television set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as: – Using cabinets or stands recommended by the manufacturer of the television set. – Only using furniture that can safety support the television set. – Ensuring the television set is not overhanging the edge of the supporting furniture. – Not placing the television set on tall furniture (for example, cupboards or
bookcases) without anchoring both the furniture and the television set to a suitable support. – Not placing the television set on cloth or other materials that may be located
between the television set and supporting furniture. – Educating children about the dangers of climbing on furniture to reach the television set or its
controls If your existing television set is being retained and relocated, the same considerations as above should be applied.
The plug or appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
What You Will Need for Set-up (Not Included)
· Philips Head Screwdriver · Internet Connection (Needed for Smart TV Streaming) · Wireless Router (Needed for Smart TV Streaming) · Computer, Tablet or Smart Phone (Needed for Smart TV Set-Up)
1

Safety information

CAUTION RISK OF ELECTRIC SHOCK
CO NOT OPEN
ATTENTION: RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR

This equipment is a Class II or double insulated device. It has been designed so that it does not require safety ground connection.

-This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of non-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.

Caution: To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel.

– The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance instructions in the literature accompanying the appliance.

This symbol indicates important instructions accompanying the product.

This symbol indicates “dangerous voltage” inside the product that presents a risk of electric shock or personal injury.

WARNING
To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. The apparatus must not be exposed to dripping or splashing. Objects filled with liquids, such vases or drinking glasses, must never be placed on the apparatus.

1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer. 12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been damaged in any way, such as powersupply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
2

15. This product may contain lead and mercury. Disposal of these materials may be regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance (www.eiae.org).
16. Minimum 5cm around the apparatus for sufficient ventilation; 17. Battery should be recycled or disposed as per state and local guidelines; 18. The ventilation should not be impeded by covering the ventilation openings with items, such
as newspapers, table-cloths, curtains, etc.; 19. No naked flame sources, such as lighted candles, should be placed on the apparatus.
WARNING: The batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.
FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. 2. any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
3

Package Contents
32RR683TC 43RR683TC
SMART TV

TV x 1pcs

Quick Start Guide
Please read this manual carefully before TV operation. Retain it for future reference.
Quick Start Guide x 1pcs

AAA Batteries for Remote x 2 pcs

Remote Control x 1pcs

Table Stands x 2 pcs

Screws for Table Stands

4

Attach the Table Stands
How to assemble the stand If you need to remove or assemble the stand please read the following instructions. -Before attaching/detaching the stand, make sure to turn off the TV. -Before performing work, spread cushioning over the base area to lay the LED TV on. This will prevent it from being damaged. Assembling instruction: Put the television on the table, fix the stands with screws given in the carton. Step1: Fasten the base assembly with screws
given in the carton. Step2: Insert the assembled base into the hole,
take out screws provided with TV set and tighten them into screw holes. – To disconnect the stand from the TV, perform the above steps in reverse order.
Front panel
The buttons on the lower panel control your TV’s basic features, including the on-screen menu. To use the more advanced features, you must use the remote control.
Remote control sensor / Power indicator POWER(In the standby mode, press to turn on the TV. In the boot state, short press to shut down.)
5

Specifications

Model Display size LED panel resolution Speaker output power Power supply Power consumption Standby comsumption Antenna input

Controller power

Dimensions (LxWxH)

TV with stand TV without stand

Weight (Net weight)

TV with stand TV without stand

Work temperature

32RR683TC 32″ Diagonal (max.) 1366×768 5Wx2 110-240V~, 50/60Hz 50W 1W 75 ohms DC 3V (Two AAA size batteries) 718x205x479mm 718x61x418mm 2.9kg 2.85kg 0oC- 40oC

43RR683TC 43″ Diagonal (max.) 1920×1080
75W
955x215x611mm 955x74x558mm 5.3kg 5.25kg

NOTES: · Design and specifications are subject to change without notice. · Weight and Dimension shown are approximate.

6

Connect The TV
1. Insert the female end of the Power Cord into the back of the TV. Then carefully plug the standard AC plug end into a 110-240V AC outlet.
2. If you are connecting other devices to the TV, utilize the appropriate optional cables and connect to the appropriate ports on the back or side of the TV.

Location of Connections

Back View of the TV

32″ Back View of the TV

43″

TV Bottom View
Note: The product and illustrations in this user’s manual is only for explanation purposes and may vary depending on model.
7

TV label ANT/CABLE

HDMI VIDEO

AV IN

L

R USB

Cable
Yellow White Red

External Equipment

Antenna

VHF/UHF Antenna
Cable ANT OUT

VIDEO EQUIPMENT

Camcorder

SPDIF HEADPHONE
LAN

Audio Receiver

The TV can be connected to the following devices: Cable Box, Satellite Box, Antenna, Video Game, Stereo System, Sound Bar, Headphones, Blu-ray Player, DVD Player, VCR, Streaming Box or Stick, Camcorder, etc.

8

Prepare The Remote Control
Remove the battery cover and insert the provided batteries. Then replace the battery cover.

Installing Batteries
1 Open the battery compartment cover on the back side.

Battery Cover

Insert two 1.5V AAA size batteries
2 in correct polarity. Don´t mix old or
used batteries with new ones.
3 Closed the cover.

2 x size AAA 1.5V
Battery Cover

The remote control needs to be used within a range of 8 meters in a straight line and 6 meters in a controlled angle.
Put the used batteries into the recycling bin since they can negatively affect the environment.
Do not place anything(such as soundbar) near remote sensor to avoid interference.

Note:

Batteries should last approximately one year under normal use (actual use will vary). 2) If the TV will remain inactive for an extended period of time, remove the batteries from the remote
control to avoid possible damage due to leakage. 3) Do not mix old and new batteries or different types of batteries. 4) Do not throw batteries into fire or water. 5) The batteries (battery pack or batteries installed) should not be exposed to excessive heat such
as sunshine, fire or the like.

9

Remote Buttons
1. POWER: Turn the TV on and off. 2. MUTE: Press this button to cut off the sound of the TV set
temporarily, press again to resume. 3. NETFLIX: If network connects, press this key to view NETFLIX
directly. 4. YouTube: If network connects, press this key to view YouTube. 5. Google Play: If network connects, press this key to view
Google Play. 6. Prime Video: If network connects, press this key to view Prime
Video. 7. COLOR BUTTONS: It’s used in the APPS. 8. BACK: Return to the previous menu. 9. HOME: Display the HOME page. 10. Arrow buttons pqtu: Use to select on-screen menu items
and change menu values. 11. OK: Confirms selection. 12. INPUT: Press to open the input source list. 13. MENU: Display the main menu or exit the current menu. 14. Search: Search information. 15. VOL+/- : Press these buttons to adjust the volume. 16. CH / : Press these buttons to change channel upward or downward. 17. Digital Buttons(0-9, – ): Directly select channel with digital buttons. 18. LIST: Press to display the channel list.
10

SET-UP THE TV (Using the Remote Control)
Initial Setup
1. Press the Power Button at the Top of the Remote. Note: TV Controls on the TV are located on the bottom or on the side of the TV. (If the TV is in Boot State, a long press on the Power Button under the TV might be necessary.)
2. Press / to select the system language and press OK to confirm the language. 3. Connect your Android phone to your TV, select “Continue” to continue the connection, and
choose “Skip” to skip this step. 4. Press / to select the WIFI to connect, press OK and enter the password to confirm the
connection is successful. 5. By accepting the Google Terms of Service to improve the product experience, select “Accept”
to accept this condition. 6. Agree to Google to get the location information of your device to get more features, choose
“YES” to accept. 7. By agreeing to automatically send diagnostic information to Google to improve discriminative
power, choose “YES” to accept. 8. Your device is powered by Android TV and press the button to select the browsing feature.
You can get more apps from Google Play and press the button to go to the next screen. Transfer photos and other content to the TV via the built-in chromecast, press OK to complete the browsing. Press/ to select the country of your device and press OK to confirm. 9. Once the Set-up is finished, to exit Android TV and access another component such as a Cable Box, press the Input button. Navigating the ON-SCREEN MENU In the HOME page, press the /// key to select the icon of the circular settings menu, and press OK to adjust. After finishing your adjustment, press BACK button to return to the previous menu.
11

Trouble Shooting

Having trouble? Don’t worry, it’s usually an easy fix.

After Auto Tuning only some channels are available Channel cannot be selected
USB not playing
Picture is distorted, macroblock, small block, dots, pixelization, etc
Noise from speaker
TV turns off automatically
TV turns on automatically
Picture is not shown in full screen

Check your area is covered by Digital Video Broadcasts. Try re-tuning or manually tuning missing channels. Check that you are using the correct antenna type.
Check if the channel has been blocked in the main menu settings.
Please check connecting USB cable and power supply is connected. Hard drive has not been formatted. Please make sure USB disk is compatible and the multimedia data formats are supported.
Compression of video contents may cause distortion especially on fast moving pictures such as sports and action movies.
Check cable connections, make sure a video cable is not connected to an audio input. Low signal level may cause sound distortion.
Check if the Off Timer is set to On in the Setup menu. Sleep Timer may have been enabled. If there is no signal for about 10 minutes from an input, the TV will turn off.
Check if the On Timer is set to On in the Setup menu.
Black bars on each side will be shown on HD channels when displaying SD (4:3) contents. Black bars on Top & Bottom will be shown on movies that have aspect ratios different from your TV. Adjust picture size option on your external device or TV to full screen.

12