KONKA U50SR684TC Ultra HD Smart TV User Guide

June 1, 2024
KONKA

KONKA-LOGO

KONKA U50SR684TC Ultra HD Smart TV

KONKA-U50SR684TC-Ultra-HD-Smart-TV-PRODUCT

Specifications

  • Model: UDG50SR684UN
  • Size: 142x210mm
  • Smart TV Model: U50SR684TC

Product Usage Instructions

Safety Information

  1. Read the Quick Start Guide before setting up the TV.
  2. Carefully follow the instructions and heed all warnings.
  3. Do not remove the TV back cover or block ventilation openings.
  4. Keep the TV away from water or heat sources.
  5. Avoid pinching or cutting the power cord.

Set-up Requirements

Safety information: Ensure to follow all safety warnings provided.

Package Contents

  • TV x 1pcs
  • Quick Start Guide x 1pcs
  • AAA Batteries for Remote x 2 pcs
  • Remote Control x 1pcs
  • Table Stands x 2 pcs
  • Screws for Table Stands

Attach the Table Stands

  • Before attaching/detaching the stand, ensure the TV is turned off.
  • Spread cushioning over the base area before working to prevent damage to the LED TV.

FAQ

Q: What should I do if I encounter issues during set-up?

A: If you encounter any problems during set-up, refer to the troubleshooting section in the user manual or contact customer support for assistance.

  • Please read this manual carefully before TV operation. Retain it for future reference.
  • Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, Pro Logic, and who doublo-D symbol are trademarks of Dolby Laboratories Licensing Corporation.

PREFACE

  1. Read this Quick Start Guide before starting Set-up.
  2. Then, carefully follow the Instructions, heeding all Warnings.
  3. Do Not remove the TV back cover or block the TV ventilation openings.
  4. Do Not use the TV near water or a heat Source.
  5. Do not pinch or cut the Power Cord.

Note: The product and illustrations in this user’s manual are only for explanation purposes and may vary depending on the model.

What You Will Need for Set-up (Not Included)

  • Philips Head Screwdriver
  • Internet Connection (Needed for Smart TV Streaming)
  • Wireless Router (Needed for Smart TV Streaming)
  • Computer, Tablet or Smart Phone (Needed for Smart TV Set-Up)

Safety information

  • WARNING  RISK OF ELECTRIC SHOCK CO NOT OPEN
  • This lightning flash with an arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of non-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
  • WARNING: To reduce the risk of electric shock, do not remove the cover (or back). No user-serviceable parts inside. Refer servicing to qualified service personnel.
  • The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance instructions in the literature accompanying the appliance.
  • This symbol indicates important instructions accompanying the product.
  • This symbol indicates “dangerous voltage” inside the product that presents a risk of electric shock or personal injury.
  • This equipment is a Class II or double insulated device. It has been designed so that it does not require a safety ground connection.
  • WARNING To reduce the risk of fire or electric shock, do not expose this product to rain or moisture.
  • The apparatus must not be exposed to dripping or splashing.
  • Objects filled with liquids, such as vases or drinking glasses, must never be placed on the apparatus.
  • Operating ambient temperature: 0 – 40°C;
  • Storage and transportation ambient temperature: -10 – 50°C;

IMPORTANT SAFETY INSTRUCTIONS

  1. Read these instructions.
  2. Keep these instructions.
  3. Heed all warnings.
  4. Follow all instructions.
  5. Do not use this apparatus near water.
  6. Clean only with a dry cloth.
  7. Do not block any ventilation openings. Install by the manufacturer’s instructions.
  8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
  9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.
  10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
  11. Only use attachments/accessories specified by the manufacturer.
  12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
  13. Unplug this apparatus during lightning storms or when unused for long periods.
  14. Refer all servicing to qualified service personnel.
    • Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
  15. This product may contain lead and mercury. Disposal of these materials may be regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance (www.eiae.org).
  16. Minimum 5cm around the apparatus for sufficient ventilation;
  17. Battery should be recycled or disposed of as per state and local guidelines;
    • The batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire, or the like.
  18. The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloths, curtains, etc.;
  19. No naked flame sources, such as lighted candles, should be placed on the apparatus.
  20. The plug or appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.

Instructional safeguard for the Stability of equipment

  • WARNING: Stability Hazard
  • The television set may fall, causing serious personal injury or death.
  • A television set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as.
  • ALWAYS use cabinets or stands or mounting methods recommended by the manufacturer of the television set.
  • ALWAYS use furniture that can safely support the television set.
  • ALWAYS ensure the television set is not overhanging the edge of the supporting furniture.
  • ALWAYS educate children about the dangers of climbing on furniture to reach the television set or its controls.
  • ALWAYS route cords and cables connected to your television so they cannot be tripped over, pulled, or grabbed.
  • NEVER place a television set in an unstable location.
  • NEVER place the television set on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the television set to a suitable support.
  • NEVER place the television set on cloth or other materials that may be located between the television set and supporting furniture.
  • NEVER place items that might tempt children to climb, such as toys and remote controls, on the top of the television or furniture on which the television is placed.
  • If the existing television set is going to be retained and relocated, the same considerations as above should be applied.

FCC STATEMENT

  1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
  2. This device may not cause harmful interference,
  3. This device must accept any interference received, including interference that may cause undesired operation.
  4. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.

Package Contents

KONKA-U50SR684TC-Ultra-HD-Smart-TV-FIG-4

Attach the Table Stands

How to assemble the stand

  • If you need to remove or assemble the stand please read the following instructions.
  • Before attaching/detaching the stand, make sure to turn off the TV.
  • Before performing work, spread cushioning over the base area to lay the LED TV on. This will prevent it from being damaged.

Assembling instruction:

  • Put the television on the table, fix the stands with screws given in the carton.
  • Step 1: Fasten the base assembly with screws given in the carton.
  • Step 2: Insert the assembled base into the hole, take out the screws provided with the TV set, and tighten them into screw holes.
  • To disconnect the stand from the TV, perform the above steps in reverse order.

Wall-mounting Installation (Optional)

Inches| Specifications VESA (AB)| Standard screw (CD)| Quantity
---|---|---|---
50″| 200 x 200 mm| M6*L12| 4

  • Note: “D” is the effective length of the screw in the mounting hole.
  • Before installing the wall-mounted bracket, please screw the 4 wall-mounted adapter studs into the 4 wall-mounted nuts of the metal back.
  • The figures and illustrations in this manual are provided for reference only and may differ from their actual appearance. The product design and specifications may change without notice.

Note:

  1. The bracket fixed on the wall is an optional part.
  2. When assembling the TV, there should be no other articles around it and please keep it distant from other articles.
  3. When assembling the TV, please ask the professional worker to fix it to avoid danger.
  4. The fixing picture is only for reference.
  5. Please follow the user’s manual about bracket assembly to fix the TV.
  6. Attach the mounting bracket with the VESA-compatible wall mounting kit.

Front panel

The buttons on the lower panel control your TV’s basic features, including the on-screen menu. To use the more advanced features, you must use the remote control.KONKA-U50SR684TC-Ultra-HD-Smart-TV-FIG-7

Specifications

Model U50SR684TC
Display size 50″ Diagonal (max.)
LED panel resolution 3840×2160
Speaker output power ≥5Wx2
Power supply 100-240V~, 50/60Hz
Power consumption 110W
Standby consumption ≤1W
Antenna input 75 ohms
Controller power DC 3V (Two AAA size batteries)
Dimensions (LxWxH) TV with stand
TV without stand 1111×78.2×640.4mm
Weight (Net weight) TV with stand
TV without stand 7kg

NOTES:

  • Design and specifications are subject to change without notice.
  • Weight and Dimension shown are approximate.

Connect The TV

  1. Insert the female end of the Power Cord into the back of the TV.
    • Then carefully plug the standard AC plug end into a 100-240V AC outlet.
  2.  If you are connecting other devices to the TV, utilize the appropriate optional cables and connect to the appropriate ports on the back or side of the TV.

Location of ConnectionsKONKA-U50SR684TC-Ultra-HD-Smart-TV-
FIG-8

Note: The product and illustrations in this user’s manual are only for explanation purposes and may vary depending on the model.KONKA-U50SR684TC-
Ultra-HD-Smart-TV-FIG-9

The TV can be connected to the following devices: Cable Box, Satellite Box, Antenna, Video Game, Stereo System, Sound Bar, Headphones, Blu-ray Player, DVD Player, VCR, Streaming Box or Stick, Camcorder, etc.

Prepare The Remote Control

Remove the battery cover and insert the provided batteries. Then replace the battery cover.

Installing Batteries

  1. Open the battery compartment cover on the backside.
  2. Insert two 1.5V AAA-size batteries in the correct polarity. Don´t mix old or used batteries with new ones.
  3. Closed the cover.
  • The remote control needs to be used within a range of 8 meters in a straight line and 6 meters in a controlled angle.
  • Put the used batteries into the recycling bin since they can negatively affect the environment.
  • Do not place anything(such as a soundbar) near the remote sensor to avoid interference.

Note:

  1. Batteries should last approximately one year under normal use (actual use will vary).
  2. If the TV remains inactive for an extended period, remove the batteries from the remote control to avoid possible damage due to leakage.
  3. Do not mix old and new batteries or different types of batteries.
  4. Do not throw batteries into fire or water.
  5. The batteries (battery pack or batteries installed) should not be exposed to excessive heat such as sunshine, fire, or the like.

WARNING:

  • Replacement of a battery with an incorrect type may defeat a safeguard;
  • Disposal of a battery into a fire or a hot oven, or mechanically crushing or cutting of a battery, may result in an explosion;
  • Leaving a battery in an extremely high temperature surrounding environment, such as sunshine, fire, or hot surface may result in an explosion or the leakage of flammable liquid or gas;
  • A battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas.
  • CAUTION Risk of fire or explosion if the battery is replaced by an incorrect type!

Remote Buttons

  1. INPUT: Press to open the input source list.
  2. POWER: Turn the TV on and off.
  3. Profile: Switch profile.
  4. Google Assistant: Open Google Assistant.
  5. Settings: Access the settings (directly or through the dashboard in GTV) from any place in the system.
  6. Arrow buttons: Use to select on-screen menu items and change menu values.
  7. OK: Confirms selection.
  8. BACK: Return to the previous menu.
  9. Guide: Open Live TV EPG.
  10. HOME: Display the HOME page.
  11. Button: Press to open virtual keyboard in the DTV source.
  12. LIST: Press to display the channel list.
  13. INFO: Press to display the channel information.
  14. VOL+/-: Press these buttons to adjust the volume.
  15. MUTE: Press this button to cut off the sound of the TV set temporarily, and press it again to resume.
  16. CH /: Press these buttons to change the channel upward or downward.
  17. NETFLIX: If the network connects, press this key to view NETFLIX directly.
  18. YouTube: If the network connects, press this key to view YouTube.
  19. YouTube Music: If the network connects, press this key to view YouTube Music.
  20. Prime Video: If the network connects, press this key to view Prime Video.KONKA-U50SR684TC-Ultra-HD-Smart-TV-FIG-14

SET-UP THE TV (Using the Remote Control)

Initial Setup

  1. Press the Power Button at the Top of the Remote.
    • Note: TV Controls on the TV are located on the bottom or the side of the TV.
    • (If the TV is in Boot State, a long press on the Power Button under the TV might be necessary.)
  2. You will need to Pair the Remote with the TV firstly. After the code is successful, you can use the Bluetooth remote control to operate the TV.
  3. Press ▲/▼ to select the system language and press OK to confirm the language.
  4. Press ▲/▼ to set up Google TV which needs to sign in Google account for Google service, or basic TV which does not need to sign in to Google account.
  5. Scan the setup code to download the Google Home app on your phone to set up or press ▲/▼ to set up on TV.
  6. Press ▲/▼ to select the wifi to connect, press OK, and enter the password to confirm the connection is successful.
  7. By accepting the Google Terms of Service to improve the product experience, select “Accept” to accept this condition.
  8. Once the Setup is finished, to exit Google TV and access another component such as a Cable Box, press the Input button.

Navigating the ON-SCREEN MENU

  • In the HOME interface, press the ▲/▼/◄/► key to select the icon of the circular settings menu, and press OK to adjust.
  • After finishing your adjustment, press the BACK button to return to the previous menu.

Trouble Shooting

Having trouble Don’t worry, it’s usually an easy fixKONKA-U50SR684TC-
Ultra-HD-Smart-TV-FIG-18

  • This product has been sold under the responsibility of Treasure Creek Limited. The KONKA logo are trademark used under license by Treasure Creek Limited.
  • All other products, services, companies, trademarks, trade or product names, and logos referenced herein are the property of their respective owner.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals