KONKA 32RR683UN00 HD Smart TV User Guide

KONKA 32RR683UN00 HD Smart TV

Specifications

• Model: 557& 557&
• Power: 60$5779
• Dimensions: 5,6.2 x 4XLFN6WDUW*XLGHEHIRUHVWDUWLQJ6HWXS
• Weight: 21&,+

Product Information

This product is a versatile tool designed to simplify various tasks in your daily life. With its advanced technology and ergonomic design, it offers efficiency and convenience in a compact package.

Product Usage Instructions

1. Step 1: Power On
   Ensure the device is properly connected to a power source. Press the power button to turn it on.

2. Step 2: Setup
   Follow the on-screen instructions to set up the device according to your preferences.

3. Step 3: Operation
   Use the control panel or remote to navigate through different functions and select your desired settings.

4. Step 4: Maintenance
   Regularly clean the device with a soft cloth and avoid exposing it to extreme temperatures or moisture.

Frequently Asked Questions (FAQ)

• Q: How do I troubleshoot if the device does not power on?
  A: Check the power source, ensure all connections are secure, and try resetting the device by unplugging and replugging it.

• Q: What should I do if the device freezes during operation?
  A: Restart the device by powering it off and on again. If the issue persists, contact customer support for further assistance.

• Q: Can I use this product for outdoor activities?
  A: While the product is designed for indoor use, it may be suitable for limited outdoor use in dry conditions. Avoid exposure to direct sunlight or water.

32RR683TC
43RR683TC

SMART TV

Quick Start Guide
Please read this manual carefully before TV operation. Retain it for future reference.

Dolby AUDIO
Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.

PREFACE

1. Read this Quick Start Guide before starting Set-up.
2. Then, carefully follow the Instructions, heeding all Warnings.
3. Do Not remove the TV back cover or block the TV ventilation openings.
4. Do Not use the TV near water or a heat Source.
5. Do not pinch or cut the Power Cord.

Note: The product and illustrations in this user’s manual is only for explanation purposes and may vary depending on model.

CAUTION

Never place a television set in an unstable location. A television set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as:

• Using cabinets or stands recommended by the manufacturer of the television set. Ensuring televis hase is sotty sanging the eige of she supporting furniture.
• Not placing the television set on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the television set to a suitable support.
• Not placing the television set on cloth or other materials that may be located between the television set and supporting furniture.
• Educating children about the dangers of climbing on furniture to reach the television set or its controls.

If your existing television set is being retained and relocated, the same considerations as above should be applied. The plug or appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.

What You Will Need for Set-up (Not Included)

• Philips Head Screwdriver
• Internet Connection (Needed for Smart TV Streaming)
• Wireless Router (Needed for Smart TV Streaming)
• Computer, Tablet or Smart Phone (Needed for Smart TV Set-Up)

Safety information

WARNING
RISK OF ELECTRIC SHOCK CO NOT OPEN

This lightning flash with an arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of non-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.

WARNING: To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel.

This symbol indicates important instructions accompanying the product.
This symbol indicates “dangerous voltage” inside the product that presents a risk of electric shock or personal injury.
This equipment is a Class Il or double insulated device. It has been designed so that it does not require safety ground connection.

WARNING
To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. The apparatus must not be exposed to dripping or splashing. Objects filled with liquids, such vases or drinking glasses, must never be placed on the apparatus.

• Operating ambient temperature: 0 – 40°C;
• Storage and transportation ambient temperature: -10 – 50°C;

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid iniury from tio-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
15. This product may contain lead and mercury. Disposal of these materials may be regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance (www.eiae.org).
16. Minimum 5cm around the apparatus for sufficient ventilation;
17. Battery should be recycled or disposed as per state and local guidelines; The batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.
18. The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloths, curtains, etc.;
19. No naked flame sources, such as lighted candles, should be placed on the apparatus.

Instructional safeguard for Stability of equipment
Stability Hazard
The television set may fall, causing serious personal injury or death. A television set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as:

• ALWAYS use cabinets or stands or mounting methods recommended by the manufacturer of the television set.
• ALWAYS use furniture that can safely support the television set.
• ALWAYS ensure the television set is not overhanging the edge of the supporting furniture.
• ALWAYS educate children about the dangers of climbing on furniture to reach the television set or its controls.
• ALWAYS route cords and cables connected to your television so they cannot be tripped over, pulled or grabbed.
• NEVER place a television set in an unstable location.
• NEVER place the television set on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the television set to a suitable support.
• NEVER place the television set on cloth or other materials that may be located between the television set and supporting furniture.
• NEVER place items that might tempt children to climb, such as toys and remote controls, on the top of the television or furniture on which the television is placed.

If the existing television set is going to be retained and relocated, the same considerations as above should be applied.

FCC STATEMENT

1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
2. This device may not cause harmful interference, and
3. This device must accept any interference received, including interference that may cause undesired operation.
4. any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

Package Contents

Attach the Table Stands
How to assemble the stand If you need to remove or assemble the stand please read the following instructions.

• Before attaching/detaching the stand, make sure to turn off the TV.
• Before performing work, spread cushioning over the base area to lay the LED TV on.

This will prevent it from being damaged.

Assembling instruction:
Put the television on the table, fix the stands with screws given in the carton.

Step1: Fasten the base assembly with screws given in the carton.
Step2: Insert the assembled base into the hole, take out screws provided with TV set and tighten them into screw holes.

• To disconnect the stand from the TV, perform the above steps in reverse order.

Walmounting Installation (Optional)

Note: “D” is the effective length of the screw in the mounting hole. The win-aunt he nal of the melar aaet, please screw the 4 wall-mounted adapter studs into The figures and illustrations in this manual are provided for reference only and may differ from their actual appearance. The product design and specifications may change without notice.

Note

1. The bracket fixed on the wall is an optional part.
2. When assembling the TV, there should be no other articles around it and please keep it distant from other articles.
3. When assembling the TV, please ask the professional worker to fix it in order to avoid danger.
4. The fixing picture is only for reference.
5. Please follow the user’s manual about bracket assemble to fix the TV.
6. Attach the mounting bracket with the VESA compatible wall mounting kit.

Front panel

The buttons on the lower panel control your TV’s basic features, including the on-screen menu. To use the more advanced features, you must use the remote control.

POWER In the bol dye, ode press to undone ty

Specifications

NOTES:

• Design and specifications are subject to change without notice.
• Weight and Dimension shown are approximate.

Connect The TV

1. Insert the female end of the Power Cord into the back of the TV. Then carefully plug the standard AC plug end into a 100-240V AC outlet.
2. If you are connecting other devices to the TV, utilize the appropriate optional cables and connect to the appropriate ports on the back or side of the TV.

Location of Connections

Note: The product and illustrations in this user’s manual is only for explanation purposes and may vary depending on model.

The TV can be connected to the following devices: Cable Box, Satellite Box, Antenna, Video Game, Stereo System, Sound Bar, Headphones, Blu-ray Player, DVD Player, VCR, Streaming Box or Stick, Camcorder, etc.

Prepare
The Remote Control Remove the battery cover and insert the provided batteries. Then replace the battery cover.

Installing Batteries

1. Open the battery compartment cover on the back side.
2. Insert two 1.5V AAA size batteries in correct polarity.
3. Don’t mix old or used batteries with new ones. Closed the cover.

• The remote control needs to be used within a range of 8 meters in a straight line and 6 meters in a controlled angle.
• Put the used batteries into the recycling bin since they can negatively affect the environment.
• Do not place anything(such as soundbar) near remote sensor to avoid interference.

Note

1. Batteries should last approximately one year under normal use (actual use will vary).
2. If the TV will remain inactive for an extended period of time, remove the batteries from the remote control to avoid possible damage due to leakage.
3. Do not mix old and new batteries or different types of batteries.
4. Do not throw batteries into fire or water.
5. The batteries (battery pack or batteries installed) should not be exposed to excessive heat such as sunshine, fire or the like.

WARNING:

• Replacement of a battery with an incorrect type may defeat a safeguard;
• Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, may result in an explosion;
• Leaving a battery in an extremely high temperature surrounding environment, such as sunshine, fire, or hot surface may result in an explosion or the leakage of flammable liquid or gas;
• A battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas.

CAUTION
Risk of fire or explosion if the battery is replaced by an incorrect type!

Remote Buttons

1. POWER: Turn the TV on and off.
2. MUTE: Press this button to cut off the sound of the TV set temporarily, press again to resume.
3. NETFLIX: If network connects, press this key to view NETFLIX directly.
4. YouTube: If network connects, press this key to view YouTube.
5. Google Play: If network connects, press this key to view Google Play.
6. Prime Video: If network connects, press this key to view Prime Video.
7. COLOR BUTTONS: It’s used in the APPS.
8. BACK: Return to the previous menu.
9. HOME: Display the HOME page.
10. Arrow buttons : Use to select on-screen menu items and change menu values.
11. OK: Confirms selection.
12. INPUT: Press to open the input source list.
13. MENU: Display the main menu or exit the current menu.
14. Search: Search information.
15. VOL+/- : Press these buttons to adjust the volume.
16. CH∧/∨ : Press these buttons to change channel upward or downward.
17. Digital Buttons(0-9, – ): Directly select channel with digital buttons.
18. LIST: Press to display the channel list.

SET-UP THE TV  (Using the Remote Control)

Initial Setup

1. Press the Power Button at the Top of the Remote.
   Note : TV Controls on the TV are located on the bottom or on the side of the TV. (If the TV is in Boot State, a long press on the Power Button under the TV might be necessary.)

2. Press to select the system language and press OK to confirm the language.

3. Connect your Android phone to your TV, select “Continue” to continue the connection, and choose “Skip” to skip this step.

4. Press to select the WIFI to connect, press OK and enter the password to confirm the connection is successful.

5. By accepting the Google Terms of Service to improve the product experience, select “Accept” to accept this condition.

6. Agree to Google to get the location information of your device to get more features, choose “YES” to accept.

7. By agreeing to automatically send diagnostic information to Google to improve discriminative power, choose “YES” to accept.

8. Your device is powered by Android TV and press the button to select the browsing feature. You can get more apps from Google Play and press the button to go to the next screen. Transfer photos and other content to the TV via the built-in chromecast, press OK to complete the browsing. Press to select the country of your device and press OK to confirm.

9. Once the Set-up is finished, to exit Android TV and access another component such as a Cable Box, press the Input button.

Navigating the ON-SCREEN MENU
In the HOME page, press the key to select the icon of the cirular settings menu, and press OK to adjust. After finishing your adjustment, press BACK button to return to the previous menu.

Troubleshooting

Having trouble? Don’t worry, it’s usually an easy fix.

This product has been sold under the responsibility of Treasure Creek Limited. KONKA logo are trademarks used under license by Treasure Creek Limited. All other products, services, companies, trademarks, trade or product names and logos referenced herein are the property of their respective owner.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>