Miyida G117 Open Ear Wireless Headset User Manual
- June 1, 2024
- Miyida
Table of Contents
Miyida G117 Open Ear Wireless Headset
Product Information
Specifications
- Model: XYZ-1000
- Dimensions: 10 x 5 x 3 inches
- Weight: 2 lbs
- Power: 120V AC
- Frequency: 60Hz
Product Usage Instructions
Setup
- Place the product on a flat surface near a power outlet.
- Ensure proper ventilation around the product.
Power On
- Connect the product to a 120V AC power source using the provided power cord.
- Press the power button to turn on the device.
Operation
- Use the control panel to select the desired settings.
- Follow the instruction manual for specific functions.
Maintenance
- Regularly clean the product with a damp cloth. Do not use abrasive cleaners.
- Refer to the manual for the maintenance schedule.
FAQ
Q: How do I troubleshoot if the product doesn’t turn on?
A: Check the power source and ensure the power cord is properly connected. If the issue persists, contact customer support.
Q: Can I use the product outdoors?
A: This product is designed for indoor use only. Using it outdoors may damage the product and void the warranty.
Product introduction
Operation Button
Bluetooth pairing
- Open the charging bin, and L/R headphones automatically enter Bluetooth pairing mode, waiting for a connection.
- Open the charging bin, and L/R headphones automatically enter Bluetooth pairing mode, waiting for a connection.
- Method of use
- Hold Your Ear with one hand and hang the headset over your ear
- Rotate the headphone horn and move it up and down until the headphone fits the ear contour perfectly.
- Pay attention to distinguish L/R wearing position, if the reverse will not wear up.
State to be connected
The headphones flash red and blue lights alternately
List of actions
Points to note:
- Depending on the condition of the radio waves and the location where the BLUETOOTH device is used, it may not work on mobile phones.
- Listening to this earphone at a high volume may affect your hearing. For traffic safety, please do not use these earphones while driving or cycling.
- Do not use headphones in areas where the inability to hear environmental sound can cause danger, such as railway intersections, train station platforms, pedestrian crossings, and construction sites.
- Do not place heavy objects or apply pressure on this earphone, as it may cause deformation during long-term storage.
- The accumulation of static electricity in the body may cause slight ear pain. Wearing clothes made of natural materials can minimize the impact.
- Do not subject this earphone to excessive impact.
- Please use a soft dry cloth to clean the headphones.
- Do not expose the headphones to water. The headphones are not waterproof. Remember to follow the following precautions.
- Be careful not to let the headphones fall into the sink or other containers containing water.
- Do not use headphones in damp areas or harsh weather, such as rain or snow.
- If you feel unwell after using the BLUETOOTH device, please immediately stop using the BLUETOOTH device. If the problem persists, please contact your local distributor.
- If you have any questions or concerns about this earphone that are not covered in this manual, please contact your local dealer.
Free maintenance policy:
- If the product breaks down during the warranty period, we will carry out the maintenance free of charge according to this manual.
- This document can be re-issued please take good care of, it if the following circumstances, even in the warranty period fail, the following circumstances will be charged.
- if no warranty card is shown
- if the purchase date can not be confirmed
- if the product exceeds the warranty time, the fault occurs and the maintenance request is put forward
- misuse (according to the normal use of the instructions and other precautions)
- failure or damage to equipment due to other causes, or failure or damage due to improper maintenance or modification
- fire, earthquake, wind, flood, lightning or other natural disasters, pollution, salt, abnormal voltage caused by such faults or damage
- replacement worn or fragile parts, replacement dirty parts
- Remanufactured parts or replacement parts can be used for maintenance. In addition, repair and replacement of old parts and we will properly handle.
- We shall not indemnify you for the loss caused by failure to use this product.
Warranty
Product Warranty
- This product from the date of purchase, enjoys a one-year warranty period.
- Warranty products in the repair certificate and valid sales certificate, under the following terms, can be warranty.
- Your equipment must be used correctly according to the product instructions.
- This warranty card does not apply to faults or damages caused by human activities, accidents (fire external force extrusion, falling, etc.), or natural disasters (earthquakes, typhoons. lightning, etc.)
- This warranty card will not be reissued after it is lost, Please properly keep it together with the sales voucher.
- Product name : —————————————-
- Model: ————————————————
- Purchase time: ————————————–
- Full name: ——————————————
- Contact number : —————————————-
- Place of purchase : ————————————–
- Dealer name and address : ————————————–
- Please keep this voucher properly. If your equipment needs warranty service, please contact the dealer of the equipment you purchased.
FCC
The warnings are as follows Warning:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference,
- this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, under Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used per the instructions,
may cause harmful interference to radio communications. However. there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
NOTE: This device and its antenna(s) must not be co-located or operated
in conjunction with any other antenna or transmitter
The device has been evaluated to meet general RF exposure requirements.
The device can be used in portable exposure conditions without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>