SHENZHEN MARKTRACE MR7901 RFID IOT Android APK App User Guide
- June 14, 2024
- SHENZHEN MARKTRACE
Table of Contents
SHENZHEN MARKTRACE MR7901 RFID IOT Android APK App
USE INSTRUCTIONS
This APK based on Android OS. Android version 4.0.3 and above version
supports.
Open RFID IOT APP, you can choose the language you need. Switch language on
the upper-right corner
The second option is English
Before connect RFID devices, make sure Mobile phone Bluetooth opened.
Choose the correct device name. Device will be connected automatically without
any password. After connect success, you will see these info:
(Note: If request mach password, you can use 1234)
After this, you can config RFID reader parameters, Antenna parameters,
Platform info ect.
Collector info
A, V3.5 this is software version of base station MR7901
B, Jul 25 2017,21:16:52 this is the time of software version
Device ID:
This 15bytes ID can be write by customer.
Factory num: is the name of device, should to get separately.
Wireless network params
This is the target server parameters.
Antenna parameters
When click read device info button, this antenna parameter will display
default parameters value. These parameters can be set manually. After set new
value, you can use Antenna debugging option( on the upper-right corner) to
check each antennas working status.
Click antenna info (upper-right corner) can check antennas information.
Gain range 0~31
Set 31dbi, antenna will reach MAX reading range 400m, Set 0dBi, will be MIN
reading range few meters. Different environment may vary.
RSSI range -128~0
RSSI range used to filter tag data, if tag RSSI value less than current value,
tag data will be filter.
Filter value range 0~65526 Within current value, same tag ID just transfer
once.
Residence time value range 0，60~65535 Within current value, same tag ID just
transfer once.
Wire network params
This part used for base station support TCP/IP interface and TCP/IP
connecting.(reserved function)
Collector status
System time: real network time
Network status
This part is to check device connect to operator communication network status.
Connect success or not connect.
Wireless connect IP
Check wireless network parameter
Wire connect IP
Check wire network parameters
Total ID in buffer
To check how many tags on reader’s buffer.
After set new parameters, should click set params option on the lower right.
Reader will restart automatically to make new parameters available.
Use Server Demo to check data
A, Use TCP/IP interface to check data.
- Use LAN cable connect reader to PC directly. (can also connect reader to exchange or router, but WiFi not supported)
- Make sure the IP address of PC is static IP and set this IP to Reader ( wire network params, plat IP 2.
After set params, open the server demo and input the IP and port. Click Start button, reader will output data to server demo automatically
(switch language on upper left corner in cased opened in Chinese
For PC Attendance Server demo is the same way to do connection.
B, Use GPRS (4G) to do connection.
Set Server IP and Port to reader ( wireless network params, plat IP 2)
Reader will send data to object Server automatically.
C, Update reader’s firmware
After connect reader successful, we can update reader’s firmware if needed.
Click the button in red box and choose the Bin file of reader. Then update.
FCC statements
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
NOTE: The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications or changes to this
equipment. Such modifications or changes could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
‐ Reorient or relocate the receiving antenna.
‐ Increase the separation between the equipment and receiver.
‐Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
‐Consult the dealer or an experienced radio/TV technician for help.
Federal Communication Commission (FCC) Radiation Exposure Statement When using
the product, maintain a distance of 20cm from the body to ensure compliance
with RF exposure requirements.
FCC ID:2AJQV-MR7901