buroseating BURO Mantra Chair with without Arms Instruction Manual

buroseating BURO Mantra Chair with without Arms

Specifications:

• Model: BURO MANTRA Chair

• Variants: with/without Arms

• Materials: Castors, Base, Gaslift, Seat,
  Armrest, Backrest, Screws, Washers

• Assembly Tools: 3mm Allen Key, 5mm Allen Key

• Upholstery & Foam Specs:

  • FOAM: Flame Resistant – Ca117 Section A Part I & Section D Part II
  • UPHOLSTERY: FABRIC Flame Resistance – Ca117 Section E Class I

Product Usage Instructions

Assembly:

1. Remove all items from the carton and verify all pieces before assembly.
2. Refer to the Parts List provided:
   • A – 5 Castors
   • B – 1 Base
   • C – 1 Gaslift
   • D – 1 Seat
   • E – 2 Armrest
   • F – 1 Backrest
   • G – 6 M6 Screw
   • H – 3 M8 Screw
   • I – 3 Washer
   • J – 1 3mm Allen Key
   • K – 1 5mm Allen Key
3. Follow the assembly steps provided in the manual.

Care & Maintenance:
Ensure all screws are tightened periodically to maintain stability.

FAQ :

• Q: Can I use my own upholstery with the chair?
  A: The provided upholstery and foam specifications apply to standard Buro Seating stock. Customer-specified upholstery may not meet these specifications.

• Q: How often should I tighten the screws?
  A: It is recommended to periodically check and tighten the screws to ensure stability. The frequency may depend on usage but a quarterly check is a good practice.

Assembly, Operating & Maintenance Instructions
Attention: Please remove all items from the carton, and verify all pieces before assembly.

BURO MANTRA Chair with/without Arms

Preventative Maintenance & Warning!

• Use this product only for seating one person at a time.
• Do not use this chair as a step stool/ladder.
• Do not sit on any part of the chair except the seat.
• Do not use this chair on uneven floor surfaces.
• Do not interfere with the operating of the gas lift.
• Do not use chair unless all bolts, screws and knobs are tight.
• At least every six months check all bolts, screws and knobs to ensure they are tight.
• If any parts are missing, broken, damaged or worn do not use the product until repairs are made using factory authorised parts.
• Dispose of packaging properly.
• Plastic bag is not a toy.
• Do not use plastic bag as a head covering as it may cause suffocation.
• Failure to follow these warnings could result in serious injury.

BUROSEATING.COM

Parts List

Care & Maintenance

GENERAL CARE

• To maintain the appearance of non-upholstered parts wipe the surface with a clean cloth dampened with a mild detergent solution.
• Do not remove any parts for separate cleaning.
• Do not saturate the fabric or interior with water or other cleaning liquids.
• Do not shampoo clean.
• Do not clean with hot water extraction machine.
• Do not clean with onsite dry cleaning machine.
•  Protect from direct sunlight, heat and weather.

FABRIC UPHOLSTERY CARE

• Wipe with a clean cloth dampened with a mild upholstery detergent solution.
• A soft bristle brush may be used to remove ingrained soil.
• Spot clean as above.
• Treat spills and stains as soon as possible.
• Persistent stains may require treatment by a professional cleaner.
• May be cleaned with dry powder cleaners.
• Allow to dry thoroughly before reuse.

Upholstery & Foam Specs FOAM
Flame Resistant: Ca117 Section A Part I & Section D Part II
UPHOLSTERY: FABRIC
Flame Resistance: Ca117 Section E Class I
This applies only to standard Buro Seating stock. Any customer specified upholstery may not meet these specifications.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>