buroseating MB DRAFTING Roma Mid Back Ergonomic Drafting Chair Instruction Manual
- June 1, 2024
- buroseating
Table of Contents
Assembly, Operating & Maintenance Instructions
Attention: Please remove all items from the carton, and verify all pieces before assembly.
BURO ROMA MB DRAFTING Chair
Step 1 Step 2
Attention: Place backrest face down to attach Backrest Post. The Buro
Roma MB Backrest may initially be tight to assemble when new.
Step 3 Step 4
Operating Instructions
Backrest Adjustments
The Backrest height adjustment operation, may initially be tight to raise and
lower when new. This is normal and a standard factory tolerance setting.
To achieve smooth operation raise and lower the backrest multiple times before
using the chair.
Recommended Seating Position & Adjustments
- Sit in the chair,
- Adjust the seat height so that your feet are resting flat on the floor/footring. For good circulation, your lower legs should form a 90° angle with the floor/footring, with your feet taking the weight of your legs.
- Your forearms should be as close to horizontal as possible when working at a desk.
Mechanism Operating Instructions
Important note: Do not operate the mechanism levers unless properly
seated in the chair.
Preventative Maintenance & Warning!
- Use this product only for seating one person at a time.
- Do not use this chair as a step stool/ladder.
- Do not sit on any part of the chair except the seat.
- Do not use this chair on uneven floor surfaces.
- Do not interfere with the operating of the gas lift.
- Do not use chair unless all bolts, screws and knobs are tight.
- At least every six months check all bolts, screws and knobs to ensure they are tight.
- If any parts are missing, broken, damaged or worn do not use the product until repairs are made using factory authorised parts.
- Dispose of packaging properly.
- Plastic bag is not a toy.
- Do not use plastic bag as a head covering as it may cause suffocation.
- Failure to follow these warnings could result in serious injury.
Parts List
| KEY | QTY | DESCRIPTION |
|---|---|---|
| 1 | 5 | Castors |
| 2 | 1 | Base |
| 3 | 1 | Gas Lift |
| 4 | 1 | Gas Lift Cover |
| 5 | 1 | Backrest |
| 6 | 1 | Backrest Post |
| 7 | 1 | Back Post Post Screw |
| 8 | 1 | Seat |
| 9 | 1 | Mechanism |
| 10 | 3 | Mechanism Screws |
| 11 | 1 | Back bar cover |
| 12 | 1 | Footring + Adj. Knob |
| 13 | 1 | M5 Size Allen Wrench |
Care & Maintenance
GENERAL CARE
- To maintain the appearance of non-upholstered parts wipe the surface with a clean cloth dampened with a mild detergent solution.
- Do not remove any parts for separate cleaning.
- Do not saturate the fabric or interior with water or other cleaning liquids.
- Do not shampoo clean.
- Do not clean with hot water extraction machine.
- Do not clean with onsite drycleaning machine.
- Protect from direct sunlight, heat and weather.
FABRIC UPHOLSTERY CARE
- Wipe with a clean cloth dampened with a mild upholstery detergent solution.
- A soft bristle brush may be used to remove ingrained soil.
- Spot clean as above.
- Treat spills and stains as soon as possible.
- Persistent stains may require treatment by a professional cleaner.
- May be cleaned with dry powder cleaners.
- Allow to dry thoroughly before reuse.
Upholstery & Foam Specs*
FOAM
Flame Resistant: Ca117 Section A Part I & Section D Part II
UPHOLSTERY: FABRIC
Flame Resistance: Ca117 Section E Class I
*This applies only to standard Buro Seating stock. Any customer specified upholstery may not meet these specifications.
Documents / Resources
|
buroseating MB DRAFTING Roma Mid Back Ergonomic Drafting
Chair
[pdf] Instruction Manual
MB DRAFTING, MB DRAFTING Roma Mid Back Ergonomic Drafting Chair, Roma Mid Back
Ergonomic Drafting Chair, Mid Back Ergonomic Drafting Chair, Ergonomic
Drafting Chair, Drafting Chair, Chair
---|---