cecotec SealVac Easy Magnetik Instruction Manual

June 1, 2024
cecotec

cecotec SealVac Easy Magnetik

cecotec-SealVac-Easy-Magnetik

SAFETY INSTRUCTIONS

Before using the appliance, read the following instructions carefully. Keep this instruction manual for future reference or new users.

  • Supervise children to prevent them from playing with the appliance.
  • This appliance can be used by children aged 8 and above and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge, as long asthey have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Cleaning and maintenance of the appliance must not be carried out by children without supervision.
  • If the power cord is damaged, it must be replaced by the official Cecotec Service Centre or similarly qualified personnel to avoid hazards.
  • Do not twist, bend, pull, or damage the power cable. Protect it from sharp edges and heat sources. Do not allow the cable to touch hot surfaces. Do not let the cable hang over the edge of the working surface or worktop.
  • Make sure that the mains voltage matches the voltage stated on the rating label of the appliance and that the wall outlet is earthed.
  • Make sure that your hands are dry when you touch the appliance, power cord, or plug.
  • Unplug the appliance from the outlet when not in use or during cleaning.
  • Do not cover the appliance during operation.
  • Never immerse the appliance, cord, or plug in water or other liquids.
  • Do not place the appliance on or near hot gas, an electric cooker, or an active oven.
  • This appliance is exclusively designed for household use. It is not suitable for commercial or industrial use. Do not use it outdoors or in humid environments.
  • Only use this appliance for this intended purpose as shown in the user manual.

PARTS AND COMPONENTS

cecotec-SealVac-Easy-Magnetik-
fig-1

Fig. 1

  1. Hard/dry food packaging button
  2. Soft/moist food packaging button
  3. Sealing button
  4. Sealing chamber edges
  5. Rubber seal
  6. Air suction hole
  7. Hot sealing band
  8. Vacuum chamber
  9. Sealing chamber edges
  10. Open/close button
  11. External packaging accessories
  12. Bag opener blade
    NOTE: The graphics in this manual are schematic representations and may not exactly match the device.

BEFORE USE

  • This device is packaged in a way as to protect it during transport. Take the device out of its box and remove all packaging materials. You can keep the original box and other packaging elements in a safe place. This will help you prevent damage to the device when transporting it in the future. In case the original packaging is disposed of, make sure all packaging materials are recycled accordingly.
  • Make sure all parts and components are included and in good conditions. If there is any piece missing or in bad conditions, contact the official Cecotec Technical Support Service immediately.

Box content

  • SealVac Easy Magnetik Vacuum Sealer
  • Power cable
  • 5 bags 20×30 cm
  • Hose and nozzle for generic jars

Installation

  • Place the device on a flat, stable, and dry surface, away from any corrosive material, heat, or moisture.
  • The plug must be easily accessible so that it can be unplugged quickly in case of emergency.
  • When not in use, store the appliance in a cool, dry place and keep it away from sunlight and heat sources.

OPERATION

NOTE:
The bag’s width must not exceed 30 cm. Otherwise, it will not fit. The bag must not be more than 1.5 cm thick. Otherwise, the appliance may get damaged.

How to prepare a bag opened on both sides

  1. Plug the device to a power supply. Open the lid by pressing the release button on both sides.
  2. Place one end into the vacuum chamber, close the top lid by pressing until you hear a closing sound.
  3. Press the sealing button. The button’s light indicator will light up.
  4. Once sealing is complete, the light indicator will turn off. Slide the cutting blade across the roll to cut the bag off. Make sure the cutting blade is on the edge before cutting.

How to package food

  1. Insert the food you want to vacuum pack in the bag. You can use a ready-to-use bag or you can make one as explained in the previous section.
  2. Place the edge of the bag in the vacuum chamber and leave at least 8 centimetres between it and the bag’s contents, as shown in figure 8. For larger foods, you will need to leave more space.
  3. Close the lid and press both of its sides until you hear a closing sound.
  4. Press the packing button for dry or wet food, depending on the type of food you want to package (the corresponding light indicator will be on while in operation).
  5. After the bag is sealed (indicator light will go out), open the lid by pressing the opening buttons on both sides. Remove the bag.
  6. Wait 15 seconds before packing the next bag to allow the appliance to cool down.

Please note

  • The wet food mode performs a pre-extraction for one second.
  • You can stop the process at any time by pressing the Stop button.

Warning:
Be very careful when packaging wet food, as liquids can be released when slightly pressed and these liquids can reach the vacuum port, which can cause malfunctions in the device.

How to seal bags without vacuum sealing (without removing air from the bag)

  1. Insert the food you want to package in the bag. You can use a ready-to-use bag or you can make one as explained in the previous section.
  2. Place the edge of the bag in the vacuum chamber and leave at least 8 centimetres between it and the bag’s contents as shown in figure 8. For larger foods, you will need to leave more space.
  3. Close the lid and press both of its sides until you hear a closing sound.
  4. Press the sealing button. The button’s light indicator will light up.
  5. After the bag is sealed (no light indicator should be on), open the lid by pressing the opening buttons on both sides. Remove the bag.

How to seal jars

  1. Connect one end (thinner piece) of a suction tube into the air suction hole and the other end into the jar opening (thicker piece with rubber at the base for easy sealing).
  2. Press the packaging button so that the appliance extracts all the air. Press the button again for sealing when you think sealing is finished.

Warning
Please note that if a plastic jar reduces the air inside the jar too much, this can lead to cracking of the jars.

Please note
The jar is not included.

CLEANING AND MAINTENANCE

  • Unplug the appliance from the mains and let it cool down before cleaning it.
  • Use a soft, damp cloth to clean the surface of the appliance.
  • Never immerse the appliance in water or other liquids.
  • Do not use abrasive sponges, powders, or cleaning agents to clean the appliance.
  • Make sure no moisture is inside the appliance.
  • Do not use sharp objects to remove any of the stickers or components of the appliance, as this may damage it.
  • Clean the sealing strips with a damp cloth. Make sure that the appliance is dry before using it again.

TECHNICAL SPECIFICATIONS

  • Product reference: 04375
  • Product: SealVac Easy Magnetik
  • Power: 90 W
  • Voltage: 220-240 V
  • Frequency: 50/60 Hz
  • Technical specifications may change without prior notification to improve product quality. Made in China | Designed in Spain

DISPOSAL OF OLD ELECTRICAL AND ELECTRONIC APPLIANCES
This symbol indicates that, according to the applicable regulations, the product and/ or batteries must be disposed of separately from household waste. When this product reaches the end of its shelf life, you should dispose of the cells/batteries/ accumulators and take them to a collection point designated by the local authorities. Consumers must contact their local authorities or retailer for information concerning the correct disposal of old appliances and/or their batteries. Compliance with the above guidelines will help protecting the environment.

TECHNICAL SUPPORT AND WARRANTY
Cecotec shall be liable to the end user or consumer for any lack of conformity that exists at the time of delivery of the product under the terms, conditions, and deadlines established by the applicable regulations. It is recommended that repairs be carried out by qualified personnel. If at any moment you detect any problem with your product or have any doubt, do not hesitate to contact the official Cecotec Technical Support Service at +34 963 210 728.

COPYRIGHT
The intellectual property rights over the texts in this manual belong to CECOTEC INNOVACIONES, S.L. All rights reserved. The contents of this publication may not, in whole or in part, be reproduced, stored in a retrieval system, transmitted, or distributed by any means (electronic, mechanical, photocopying, recording or similar) without the prior authorization of CECOTEC INNOVACIONES, S.L.
www.cecotec.es
Cecotec Innovaciones S.L.
Av. Reyes Católicos, 60 46910,
Alfafar (Valencia), Spain
RP01230615

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

cecotec User Manuals

Related Manuals