M Maintenanse Sportster 00-22 Passenger Seat Backrest Installation Guide
- June 1, 2024
- M Maintenanse
Table of Contents
M Maintenanse Sportster 00-22 Passenger Seat Backrest
Installation Instructions
-
Remove the two screws on the side of the car respectively, and first install the matching aluminum sleeve. (No need to remove the rear turn signal: No need to remove the housing)
-
The 4 small circles in the bracket, align the mounting holes in the motorcycle and mount the bracket with screws
*Note:* the distinction between left and right brackets
Note:** Applicable screws to hold the bracket, do not screw to the tightest first, to facilitate the installation of the backrest when there is room for adjustment -
After completing the installation of the bracket, connect the sissy bar.
-
Use the tool to tighten the backrest screws
-
Screw down the two screws on the folding frame, insert the backpack directly into the folding frame, and use the tool to tighten the screws to complete the installation