Siljoy HLP342G-5A Modern Rectangle Crystal Chandelier Installation Guide

Siljoy HLP342G-5A Modern Rectangle Crystal Chandelier

Specifications

• Model No.: HLP342G-5A
• Crystal Strands: 54
• Accessories: Connection Rod, Wire Nut x 3, Connecting Rod x 2, Mounting Bracket, Fixture Wire, Canopy x 1, Chain x 2, Crystal Strand x 54 (A x 28, B x 28)

Product Usage Instructions

Safety Rules

WARNING: Ensure electricity to the wires is shut off before installation. Use a qualified electrician if unfamiliar with electrical connections.

General Installation Instructions

1. Disconnect power by turning off the circuit breaker or removing the fuse at the fuse box.
2. Use proper electrical wiring connections according to local and NEC standards.
3. If unsure about electrical connections, seek professional help.

Tools You Need

• Ladder
• Pliers
• Wire Strippers
• Screwdrivers
• Power Drill (optional)
• Drill Bit (optional)

Fixture Assembly Details

1. Lamp Body 1 Installation: Fasten square tubes to lamp body 1 using square tube screws in the depicted sequence.
2. Lamp Body 2 Installation: Attach square tubes to lamp body 2 following the provided order and secure with a screwdriver.

Connecting Rod & Hanging Chain

1. Connecting Wires: Thread wire through connecting rod, hanging chain, and canopy.
2. Securing Connecting Rod: Twist and secure connecting rods on both sides to the lamp base at the top of the lamp body.
3. Attaching Hanging Chain: Open quick link clasps on both sides and attach them to the connecting rod and canopy.

FAQ

Q: What should I do if I encounter issues during installation?
A: Please contact us with screenshots of your order page and problem details along with pictures or a short video for assistance. Email: lightingcustomercare@gmail.com

Crystal Chandelier
Model No.: HLP342G-5A

Please contact us with following information:

1. Screen shot of your order page, including product picture, name and order ID number.
2. Problem details with pictures / short video if possbile.

Email: lightingcustomercare@gmail.com

Scan for Online Installation Video
Note: Product in the video may be different from this one.

Packing List

Installation Kit

1. EE/FF/GG/HH/II/JJ are already pre-installed on canopy (A)
2. NN are already pre-installed on LL/MM（56pcs）

Safety Rules

WARNING: BE SURE THE ELECTRICITY TO THE WIRES YOU ARE WORKING ON IS SHUT OFF; EITHER THE FUSE IS REMOVED OR THE CIRCUIT BREAKER IS TURNED OFF. TURNING THE POWER OFF USING THE LIGHT SWITCH IS NOT SUFFICIENT TO PREVENT ELECTRICAL SHOCK.

NOTE: The important safeguards and instructions appearing in this manual are not meant to cover all possible conditions or situations that may occur. It must be understood that common sense, caution, and care, are factors which cannot be built into any product. These factors must be supplied by the person(s) installing this unit.

READ & SAVE THESE INSTRUCTIONS

CAUTION: Before assembling the lighting fixture, refer to the section titled Wiring Connections. If you feel you do not have enough electrical wiring experience, either refer to a do-it–yourself wiring handbook or have your lighting fixture installed by a qualified, licensed electrician.

INSTALLATION & OPERATION INSTRUCTIONS GENERAL
Before starting the installation, disconnect the power by turning off the circuit breaker or by removing the appropriate fuse at the fuse box.
Turning the power off using the light switch is not sufficient to prevent electrical shock.
All electrical connections must be in accordance with local and National Electrical Code (NEC) standards. If you are unfamiliar with proper
electrical wiring connections, obtain the services of a qualified electrician.

Tools You Need

Fixture Assembly Details

1. Lamp Body 1 Installation
   Fasten the 4 square tubes to lamp body 1 using square tube screws, following the sequence depicted in Figures 1-2-3-4. Tighten them using a screwdriver.

2. Lamp Body 2 Installation
   Attach the 4 square tubes to lamp body 2 with the square tube screws in the order shown in Figures 5-6-7-8. Secure with a screwdriver by turning to tighten.

1. Connecting Wires
   Insert one end of the wire through the connecting rod, and thread it through both the hanging chain and the canopy.

2. Securing the Connecting Rod:
   As illustrated in Fig. 1, twist and secure the connecting rods on either side to the lamp base located at the top of the lamp body.

3. Attaching the Hanging Chain
   As depicted in Fig. 2, twist open the quick link clasps on both sides, and simultaneously attach them to the connecting rod and the canopy.

Mounting and Wiring

Note: Please test the fixture before installation to ensure it is working properly.

1. Turn off power at the circuit box to avoid possible electric shock.
2. Secure the fixture to the junction box using mounting screws (not included).
3. Connect fixture wires to outlet box wires with wire nuts (referenced as ③), green wire to ground wire, white to neutral wire, black to hot wire. Wrap the connectors with electri cal tape separately .
4. Attach the canopy to the affixed mounting plate (referenced as ①) using a cap nut (ref erenced as ④) .

Installation of Crystals

1. Attaching Crystal Strings
   Insert the butterfly buckle from the crystal string into the lamp body’s small hole as in Fig. 1, then bend the other end downwards as shown in Fig. 2.

2. Arranging Crystal Strings
   Alternatively hang crystal strings A and B on the lamp body to create a staggered effect.

Light Source Installation

1. Install the Bulbs
   (E12 x 5, Max 40W each, LED recommended, not included)

2. Installation Simplified
   The crystal strings come with pre-installed butterfly clips. Simply hang them on the light body to finish installation.

Trouble Shooting

1. Missing or Broken Parts
   • Make a list of the missing/broken parts according to the packing list, take photos for broken parts, then email us for free replacements.
2. Bulbs Do Not Light Up, Flicker, or Operate Noisily
   • Ensure that the power is on and the switch is operational.
   • Verify that the bulb is installed correctly.
   • Replace the bulb with a new one.
   • Inspect the wires to ensure they are properly connected.
   • If using a dimmer switch, confirm that the bulb is compatible with dimming features.
3. Installation Issues
   • Photograph the ceiling and contact the seller for technical support.

Clean and Care

1. Ensure that the power is turned off and the bulb has cooled before handling.
2. Wipe clean with a dry cloth or a mild soapy solution. Do not use corrosive cleaners.

Ordering Parts
Keep this manual for future reference, and in case replacement parts are needed. Available parts can be ordered from place of purchase. Use ex-act wording from diagrams when ordering parts.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>