Siljoy HLC0170820 Luxury Large Square Crystal Chandelier Instruction Manual

Siljoy HLC0170820 Luxury Large Square Crystal Chandelier

Specifications

• Model No.: HLC0170820
• Contact Information:
  • Tel: +1 206-445-0574,
  • Email: [email protected]

Product Information

Packing List

• Canopy & Bracket
• Crystal Strand (#1: 56 pcs, #2: 48 pcs, #3: 40 pcs, #4: 32 pcs, #5: 24 pcs, #6: 16 pcs, #7: 8 pcs, #8: 1 pc)
• Crystal Rod (128 pcs)
• Crystal Ball (97 pcs)
• Screw & Glove (1 set)
• Installation Manual (1 pc)

Note: Crystal is fragile, spare parts included. Some parts may be inside the canopy, ensure everything is removed from the box.

Safety Rules

• WARNING: Ensure electricity to the wires is shut off before working. Use caution and follow safety guidelines.
• Tools Needed: Slotted screwdriver, Adjustable wrench, Step ladder, Wire cutters, wiring supplies.
• Light Bulbs Required
  This fixture uses GU10 bulb base, compatible with halogen and LED bulbs up to 50W. Dimmable with dimmable bulbs and compatible dimmer switch (not included). Bulbs are not included.

Product Usage Instructions

1. Installation Preparation
   Tools You Need: Ladder, Pliers, Wire Strippers, Screwdrivers, Power Drill (optional), Drill Bit (optional).

2. Mounting & Wiring
   Test the fixture on the ground before installation to ensure it is working properly.

   • Plastic Anchor
   • Wire Connector
   • Fixture Wire
   • Mounting Bracket
   • Wood Screw
   • Canopy
   • Bolt Cap

FAQ

1. Q: What type of bulbs does the chandelier use?
   A: The chandelier uses GU10 bulb base and works with halogen and LED bulbs up to 50W. Bulbs are not included.

2. Q: Can I install the chandelier myself?
   A: If you are unfamiliar with electrical wiring connections, it is recommended to obtain the services of a qualified electrician for installation.

Crystal Chandelier
Model No.: HLC0170820

Any question please contact us:

• Tel: +1 206-445-0574
• Email: [email protected]
• Tel: +1 206-445-0574
• Email: [email protected]

Packing List

Please open your package and check the accessories according to the packing list.
NOTE:

1. Crystal is fragile, spare parts included.
2. Some parts may be placed inside the canopy, please take everything out of the box when you check the packing list.

Safety Rules

• WARNING: BE SURE THE ELECTRICITY TO THE WIRES YOU ARE WORKING ON IS SHUT OFF; EITHER THE FUSE IS REMOVED OR THE CIRCUIT BREAKER IS TURNED OFF. TURNING
• THE POWER OFF USING THE LIGHT SWITCH IS NOT SUFFICIENT TO PREVENT ELECTRICAL SHOCK.
• NOTE: The important safeguards and instructions appearing in this manual are not meant to cover all possible conditions or situations that may occur. It must be understood that common sense, caution, and care, are factors which cannot be built into any product. These factors must be supplied by the person(s) installing this unit.

READ & SAVE THESE INSTRUCTIONS

• CAUTION: Before assembling the lighting fixture, refer to the section titled Wiring Connections. If you feel you do not have enough electrical wiring experience, either refer to a do-it–yourself wiring handbook or have your lighting fixture installed by a qualified, licensed electrician.
• UNPACK THE PACKAGE
• Check the contents to be sure everything is included
• Tools Needed: Slotted screwdriver, Adjustable wrench, Step ladder, Wire cutters, wiring supplies as required by electrical code.

INSTALLATION & OPERATION INSTRUCTIONS GENERAL

• Before starting the installation, disconnect the power by turning off the circuit breaker or by removing the appropriate fuse at the fuse box. Turning the power off using the light switch is not sufficient to prevent electrical shock. All electrical connections must be in accordance with local and National Electrical Code (NEC) standards. If you are unfamiliar with proper electrical wiring connections, obtain the services of a qualified electrician.
• Remove the fixture and the mounting packages from the box and make sure that no parts are missing by referencing the illustrations on the installation instructions.
• Be sure to read these installation instructions and review the diagrams thoroughly before installation.

LIGHT BULBS REQUIRED

• This fixture uses GU10 bulb base, works with halogen and LED bulbs up to 50W. Fully dimmable when used with dimmable bulbs and a compatible dimmer switch (not included).
• BULBS ARE NOT INCLUDED IN THIS ITEM. Please purchase the right bulbs you need.

Installation Preparation

Tools You Need
If mounting to a support structure, you will also need the optional tools.

Mounting & Wiring

Please test the fixture on ground before installation to ensure it is working properly.
NOTE: Please test the fixture before installation to ensure it is working properly.

1. Turn off power at circuit box to avoid possible electric shock.
2. Place mounting bracket ④ on ceiling and mark out the points where you would like to drill holes.
3. Drill holes on the ceiling and insert plastic anchors ①.
4. Attach the mounting bracket ④ to the plastic anchors ① with wood screws ⑤.
5. Connect fixture wires ③ to house wires using wire connector ②, black/ brown fixture wire to live wire, white/blue fixture wire to neutral wire, yellow & green wire to your ground wire (optional).
6. Attach canopy ⑥ to mounting bracket ④ with bolt cap ⑦ provided.
   Note: You may need to enhance your ceiling and use other screw/bolt anchor for the installation, please consult an electrician for details.

Fixture Assembly

1. Remove protective film above canopy.
2. Install light bulbs (GU10 base, Max 50W each, LED recommended).
3. Connect crystal ball and crystal rod to crystal strand, attach the crystal strand to the canopy (see page 7) according to above diagram.
   Note: Please hang the strands from the center of canopy, then work the way out.

 Assembly Details

Trouble Shooting

1. Missing/Broken Parts
   Make a list of the missing/broken parts according to the packing list, take photos for broken parts, then email us for free replacements.

2. Bulbs Do Not Light Up

   • Check your power and switch to make sure it’s power on.
   • Check the bulb to make sure it’s installed correctly.
   • Change a new bulb.
   • Check the wires to make sure they are connected correctly.

3. Bulbs Flicker/Noisy Operation

   • Check the bulb to make sure it’s installed correctly.
   • Change a new bulb.
   •  Make sure your bulb is dimmable if you use a dimmer switch.

4. Could Not Install

   • Take photos of the ceiling, contact seller for technical support.

Clean And Care

To clean, wipe fixture with soft cloth. Spray from chemical cleaners can discolor the finish of fixture. Do not use scouring pads, powders, steel wool or abrasive paper to clean this fixture.
Ordering Parts
Keep this manual for future reference, and in case replacement parts are needed. Available parts can be ordered from place of purchase. Use exact wording from diagrams when ordering parts.

Hazardous substance

• This table is prepared according to provisions of SJ/T 11364.
• O: Indicates that said hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement of GB/T 26572.
• x: Indicates that said hazardous substance contained in at least one of the homogeneous materials for this part above the limit requirement of GB/T 26572.

“We followed the light to a brighter and warmer place.”

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>