TRIXIE 43884 Altea Cat Tree Installation Guide
- June 1, 2024
- TRIXIE
Table of Contents
TRIXIE 43884 Altea Cat Tree
Product Usage Instructions
- Assembly Instructions:
- Make sure to assemble the product on a flat surface.
- Start by attaching the bottom plate (Pos. 1) to the platform (Pos. 2).
- Continue by adding the platforms (Pos. 3 and Pos. 4) on top of each other.
- Secure the posts (Pos. 5, Pos. 6, Pos. 7) at designated locations.
- Connect the parts using the provided screws and Allen Key (Pos. d).
- Finish by attaching the padded top platform (Pos. 4) and the connection disc (Pos. 8).
- Maintenance:
- Regularly check and tighten all screws to ensure the stability of the cat tree. Clean the plush surfaces with a damp cloth if needed.
FAQs
- Q: Is it safe for my cat to use the Cat Tree Altea?
- A: Yes, the Cat Tree Altea is designed with stability and safety in mind. However, always supervise your cat during use.
- Q: Can I customize the Cat Tree Altea with additional accessories?
- A: It is recommended to only use accessories provided by the manufacturer to maintain the structural integrity of the cat tree.
SPECIFICATION
Item No. | Cat Tree | Height | Colour | Colour code |
---|---|---|---|---|
4388 | Altea | 32.6 in. 83 cm | platinum grey/ beige | 2 |
grey/grey | 4 |
PARTS DESCRIPTION
Pos. No.| Description| Measurement in inch/mm| Quantity|
Item No. -2| Item No. -4
---|---|---|---|---|---
Pos. 1| Bottom plate| 15.7 x 15.7 x 0.8 in.
400 × 400 x 20 mm
| 1| 43882-10| 43884-10
Pos. 2| Platform| 15.4 x 11 x 0.8 in. 390 × 280 × 20 mm| 1| 43882-11| 43884-11
Pos. 3| Platform| 20.5 x 12.6 x 0.8 in.
520 × 320 × 20 mm
| 1| 43882-12| 43884-12
Pos. 4| Padded top platform| 13.4 x 13.4 x 0.8 in.
340 x 340 × 20 mm
| 1| 43882-13| 43884-13
Pos. 5| Post| DIAM 3.5 x 11 in.
ø 90 × 280 mm
| 2| 4388-30
Pos. 6| Post| DIAM 3.5 x 15.7 in.
ø 90 × 400 mm
| 2| 4388-32
Pos. 7| Post with spacer bolt| DIAM 3.5 x 15.7 in.
ø 90 × 400 mm
| 1| 4388-33
Pos. 8| Connection disc, plush| DIAM 3.5 x 0.9 in.
ø 90 × 20 mm
| 1| 43882-40| 43884-40
Pos. a| Flathead screw| M0.3 x 2 in. M8 × 50 mm| 3| 4388-60
Pos. b| Thread rod| M0.3 x 3.1 in.
M8 x 80 mm
| 3
Pos. c| Washer| M0.3 x 0.9 in.
M8 x 24mm
| 2
Pos. d| Allen Key| | 1
Advice:
- This product should be assembled by an adult.
- Please mount the brush in the pre-drilled holes.
- Please check the screws regularly and retighten them if necessary.
- Please assemble the tree top down!
CONTACT
- 061123 TRIXIE Pet Products, Inc.
- P.O. Box 101196
- Ft. Worth, TX 76185
- www.trixiepet.com.
- Assembling Instruction & Parts List #43882/43884
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>