BougeRV ROVER2000 Semi Solid State Portable Power Station User Manual

BougeRV ROVER2000 Semi Solid State Portable Power Station

DISCLAIMER

Read all safety tips, warning messages, terms of use, and disclaimers carefully. Refer to the terms of use and disclaimer at https://bougerv.com/pages/terms-of-service and stickers on the product before use. Users take full responsibility for all usage and operations. Familiarize yourself with the related regulations in your area. You are solely responsible for being aware of all relevant regulations and using BougeRV products in a compliant way.

Package List

Please check the packaging and make sure you receive all accessories. If any of these are missing, please feel free to contact us at service@bougerv.com.

1. ROVER 2000 *l
2. AC Charging Cable *l
3. Car Charging Cable (Cigarette to Anderson) *l
4. Solar Charging Cable (MC4 to Anderson) *l
5. User Manual & Warranty Card *l

 Specifications

General Info

Safety Instructions

Usage

1. Do not use the product near a heat source, such as a fire source or a heating furnace.
2. Avoid contact with any liquid. Do not immerse the product in water or get it wet. Do not use the product in rainy or humid environments.
3. Do not use the product in an environment with strong static electricity/magnetic fields.
4. Do not disassemble the product in any way or pierce the product with sharp objects.
5. Avoid using wires or other metal objects that may result in a short circuit.
6. Do not use unofficial components or accessories. If you need to replace any components or accessories, please visit the official BougeRV channels to check relevant information.
7. When using the product, please strictly follow the operating environment temperature specified in this user manual. If the temperature is too high, it may result in a fire or explosion; if the temperature is too low, the product performance may be severely reduced, or the product may cease to work.
8. Do not stack any heavy objects on the product.
9. Do not lock the fan forcibly during use or place the product in an unventilated or dusty area.
10. Please avoid impact, falls, or severe vibrations when using the product. In case of a severe external impact, turn off the power supply immediately and stop using the product. Ensure the product is well fastened during transportation to avoid vibrations and impacts.
11. If you accidentally drop the product into the water during use, please place it in a safe open area, and stay away from it until it is completely dry. The dried product should not be used again. If the product catches fire, we recommend that you use the fire extinguishers in the following order: water or water mist, sand, fire blanket, dry powder, and finally a carbon dioxide fire extinguisher.
12. Use a dry cloth to clean off dirt on the product ports.
13. Rest the product on a flat surface to avoid damages caused by the product falling over. If the product is overturned and severely damaged, turn it off immediately, place the battery in an open area, keep it away from combustible matter and people, and dispose of it by local laws and regulations.
14. Ensure that the product is kept out of reach of children and pets.
15. Store the product in a dry and ventilated place.
16. It is recommended to use moisture barrier bags in wet environments (for example, places by the sea or waterways) to prevent the product from getting soaked. If water is found inside the product, it must not be used or turned on again. Please take anti-electric shock measures before touching the product. Following this, place the product in a safe, waterproof, and open area. Once complete contact BougeRV Customer Service immediately.
17. This product is not recommended for powering medical emergency equipment related to personal safety, including but not limited to medical-grade ventilators (hospital version CPAP: Continuous Positive Airway Pressure). artificial lungs (ECMO, Extracorporeal Membrane Please follow your doctor’s instructions and consult with the manufacturer for restrictions on the use of the equipment. If used for general medical equipment, please be sure to monitor the power status to ensure that the power does not run out.
18. When in use, power supply products will generate electromagnetic fields, which are likely to affect the normal operation of medical implants or personal medical equipment such as pacemakers, cochlear implants, hearing aids, defibrillators, etc. If these types of medical equipment are being used, please contact the manufacturer to inquire about any restrictions on the use of such equipment. These measures are fundamental to ensure a safe distance between the medical implants (for example, pacemakers, cochlear implants, hearing aids, defibrillators, etc.) and this product while in use.

DISPOSAL

1. If conditions permit, make sure that the battery is fully discharged before disposing of it in a designated battery recycling bin. The product contains batteries with potentially dangerous chemicals, so it is strictly prohibited to dispose of it in ordinary trash cans. For more details, please follow the local laws and regulations on battery recycling and disposal.
2. If the battery cannot be fully discharged due to a product failure, please do not dispose of the battery directly in the battery recycling box. In such a case, you should contact a professional battery recycling company for further processing.
3. Please dispose of over-discharged batteries that cannot be recharged.

Storage & Maintenance

1. Ideally, use and store the product between 75°C -35°C [59° F – 95° F). and always keep it away from water, intense heat, and sharp objects. Do not store in temperatures above 40°C (704° F) or below 0°C (32° F) for an extended period.
2. Storing a battery with a low charge for a long period shortens its lifespan. ROVER 2000 mitigates the damage by putting the battery into hibernation mode. To get the most out of the battery, make sure it is about 60% before putting ROVER 2000 into long-term storage, and then once every three months, discharge the battery to 30% and recharge it back to 60%.

 Operating Instructions

Product Details

Smart Display

General Product Usage

Display Screen
Whether you are charging or discharging, the screen will turn off automatically after 30s. Short pressing of any five buttons can wake up the display screen.

ECO Function
When the AC output is lower than Sw for 24 hours, AC modules will turn off automatically. DC & USB have no Eco function.

Alarm Function
All abnormal states are accompanied by error codes or buzzer warnings. ROVER 2000 can resume work after the abnormality is canceled automatically.

Charglng

AC Charging
ROVER 2000 supports 1500W AC input, and the product recharges 0-80% in 1.1 hours.

Please use the BougeRv AC charging Cable for fast charging. Bougerv takes no responsibility for any consequences caused by failures to follow instructions, including but not limited to charging with AC charging cable.

PV Charging
Users can connect solar panels in series or in parallel as shown in the picture to charge the product. The product supports 11-l00V DC input, 30A max current, and 1500W max charging power.

When using a BougeRV solar panel to charge the product, please follow the instructions that come with the solar panel. Before connecting the solar panel, please ensure that the solar panel’s output voltage is within 700V to avoid product damage.
More models : Yuma 100, Yuma 200, Paso 100, Paso 200, etc.

Car Charging
Users can recharge the product through the Car Charging Input Port. It supports 12V car chargers and an lOA default charging current.

Please charge using the car charger after you’ve started the car to avoid failure to start due to an insufficient car battery. In addition, please make sure that the Car Charging Input Port and the Car Charging Cable are in good condition. BougeRVtakes no responsibility for any losses or damages caused by failure to follow instructions.

Extra Battery

The product can be connected with up to 3 Extra Batteries at the same time to meet higher capacity needs. Please refer to the user manuals of the ROVER 2000 Extra Battery.

Extra Battery, please follow the instructions below:

1. Before connecting the product to an Extra Battery, please make sure that both the product and the Extra Battery are turned off.
2. After connecting the product to an Extra Battery, please make sure that both of their LCD screens display a battery icon before using it.
3. Do not directly connect or remove the Extra Battery during the charging and discharging processes. If you need to connect or remove it midway, please turn off the product first.
4. Do not touch the metal terminals of the Extra Battery connector with your hands or other objects. If foreign objects adhere to the metal terminals, please gently wipe them with a dry cloth.

Please charge using the car charger after you’ve started the car to avoid failure to start due to an insufficient car battery. In addition, please make sure that Car Charging Input Port and the Car Charging Cable are in good condition. BougeRVtakes no responsibility for any losses or damages caused by failure to follow instructions.

Extra Battery
The product can be connected with up to 3 Extra Batteries at the same time to meet higher capacity needs. Please refer to the user manuals of the ROVER 2000 Extra Battery.

Extra Battery, please follow the instructions below:

1. Before connecting the product to an Extra Battery, please make sure that both the product and the Extra Battery are turned off.
2. After connecting the product to an Extra Battery, please make sure that both of their LCD screens display a battery icon before using it.
3. Do not directly connect or remove the Extra Battery during the charging and discharging processes. If you need to connect or remove it midway, please turn off the product first.
4. Do not touch the metal terminals of the Extra Battery connector with your hands or other objects. If foreign objects adhere to the metal terminals, please gently wipe them with a dry cloth.

Troubleshooting

Error Code & Troubleshooting

FAQ

Ql: What are the advantages of semi-solid batteries over LFP batteries?

A: 7. Excellent low temperature charge and discharge performance, can be used for normal discharge at l4°F. 2. It has a high energy density of 260Wh/kg. With the same capacity, it is half the weight of LiFePO4, and has the same safety performance and cycle life as LiFePO4.

Q2: Does ROVER 2000 have EPS function?

A: With excellent EPS function, the switching time is less than 20ms, which meets the load requirements of sensitive electrical appliances.

Q3: Which devices can be powered by the AC outlet of the product?

A: The rated power of the product is 2200W, the peak power is 4000W (3 seconds), and the AC output port can supply power for most household appliances.

Q4: Are there any precautions for connecting the extended battery pack?

A: When the number of connected battery packs appears in the area above the power display, it means the expansion is successful.

QS: How to use ROVER 2000 as uninterruptible power supply in the environment of long-term power failure?

A: ROVER 2000 supports a maximum photovoltaic input oflS00W, a wide voltage range of 10-l00Vand a maximum current of30A. We recommend that you purchase a solar panel pack (Bpcs 200W solar panels) as a supplementary energy solution during power outages.

Q6: Does ROVER 2000 have energy-saving protection settings? Will this function turn off the appliance by mistake?

A: The DC output has canceled the energy-saving protection. When you use a DC appliance such as a car refrigerator, you don't need to worry about turning it off by mistake. The AC output retains energy-saving protection due to its high power consumption.

Q7: There is no wheel design. I am worried that it will be inconvenient for long-distance transportation. Do you have matching storage bags and carts for sale?

A: We have put special waterproof storage bags and trolleys on the shelves according to your needs, and you can enter our store to buy them.

After-sales Service Guarantee

Maintenance service process

STEPl: Start a repair request

• Contact BougeRV customer support by phone or email.
• Please attach the order number, detailed condition pictures and defective parts, we will be able to reply smoothly.

STEP2: Send your product to the repair center.
Please put the product in the carton and send it to the repair center.

STEP3: Check the product
Check product and accessories received. The repairman will check for the symptom you indicated.

STEP4: Diagnose and repair products
We will determine the location of the fault and the parts that need to be replaced, and make repairs.

STEP 5: Resend the repair product

• We will deliver the product as soon as the repair is completed.
• About delivery time: It takes about l to 2 weeks after the product arrives at our company.

Limited Warranty

BougeRV provides 5 years warranty for customers who purchase on Amazon and the BougeRV official website.

Warranty Period
The warranty is measured starting on the date of purchase by the original purchaser. To establish the start of the warranty period, the purchaser must provide a screenshot of the order from Amazon or the website.

Tips
If there is any problem with the product, you can provide us with pictures and videos for identification. After the confirmation of the technicians, we will provide return and exchange services with you.

• Amazon : service@bougerv.com
• BougeRV Website:support@bougerv.com
• + l 408 656 8402 9 AM-6 PM (PT) Monday-Friday
• www.bougerv.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>