imation IMWP200 Magnetic Wireless Power Bank with Stand User Guide
- June 1, 2024
- imation
Table of Contents
imation IMWP200 Magnetic Wireless Power Bank with Stand
O – Jin Corporation / www.imation.com
imation and the imation logo are trademarks of O-Jin Corp.
All other logos and trademarks are the property of their respective owners.
MagSafe and iPhone are trademarks of Apple Inc.
imation Magnetic Wireless Power Bank With Stand
Quick Start Guide
Thank you for purchasing imation Magnetic Wireless Power Bank With Stand.
Please refer below for installation guide of proper installation and warranty
policy. imation Magnetic Wireless Power Bank With Stand is compatible with
iPhone 12 or later version. Please use a MagSate compatible case or a magnetic
sticker to secure your phone properly.
What’s in the box
How to connect
- Read User Manual before using imation Magnetic Wireless Power Bank With Stand and follow all instructions.
- Press the power button to start the device. the white LED will light up first and the device is ready to charge.
- Press the power button twice to turn off the power bank. If there is no charging activities in 5 seconds, the device will be power-off automatically.
- Connect your phone and the device with a Type-C cable. The device will charge your phone automatically.
- Place your phone on the wireless charging pad, it will charge automatically.
- Make sure there is any metal or small objects between the charging device and the power bank. It may cause malfunction or errors.
- Please use 18W or higher power adapter (Power Delivery, AFC, QC2.0/3.0 or Higher compatible charger) to charge the device properly.
- The device is only compatible with the USB Type-C, please check your cable before use.
The Components
- Wireless Charging Pad
- Battery Level Indicator LED
- Wireless Charging Indicator LED
- USB C Port
- Power Button
Battery Level Indicator LED UI
LED Status
Precautions
- Do not strike, bend, drop, wet or apply excessive force to imation Magnetic Wireless Power Bank With Stand. This may cause damages to the product.
- Do not disassemble or damage imation Magnetic Wireless Power Bank With Stand. If the Power Bank has been disassembled by user, all warranties will be void.
- Please confirm whether your devices have wireless charging function before use.
- Please check whether the devices deviate from the wireless inductive charging area of the charger.
- Please use MagSafe compatible mobile case or without mobile case for charging the devices properly.
- It is recommended charging or use the power bank with ambient temperature ranging between 0°C~35°C (32″F~95″F). If the temperature is too high, the performance of the power bank may drop.
- Charging or using the power bank may cause warm heat. This symptom is ordinary.
- Fully charge and discharge the power bank every 2 months to maintain the power bank performance if you do not use it for a long time.
Safety Notes
- Avoid using in the environment of high temperature, humidity, strong static electricity and strong magnetic field.
- For your safety, please do not use a wet hand plug and unplug electrical appliances.
- Avoid putting the charger in a place easily accessible to infants and children.
- Do not use the product if it is contaminated with water or dirt. This product does not support waterproofing.
- Non-professional personnel are not allowed to open and repair without authorization.
Warranty Policy
imation Magnetic Wireless Power Bank With Stand covered by 2 years limited warranty from the original purchase date. Pursuant to the terms of imation warranty policy. imation will provide proper warranty service if product fail under normal use. For the products that are out-of-warranty period hereunder, imation may refuse to provide any warranty service. Product customer service will be varied by region or country. If the product service is not available, please contact resellers.
Warranty Limitations
The warranty stated herein does not apply if any product failure caused by
- Act of improper use such as prolonged exposure to
- Malfunction of other equipment
- Acts of nature
- Defects or damages from moving or dropping after purchase 5. Damaged connector or cable
Warning and Precaution
imation is not responsible for any cost caused by defects or damages of
products from misuse or neglect.
Product Specification
Compatible with iPhone 12 or later version.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications (including the antennas) to this device that are not expressly approved by the manufacturer may void the user’s authority to operate the equipment.
Note
- This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications, However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- Modifications not expressly approved by the manufacturer could void your authority to operate the equipment under FCC rules.
FCC RF exposure statement:
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction