imation 3 In 1 USB-C Multiport Hub User Manual
- June 12, 2024
- imation
Table of Contents
imation 3 In 1 USB-C Multiport Hub
PRODUCT COMPOSITION
- Hub x 1
- Cable x 1
SPECITICATIONS
- USB-C Up to PD 100W
- HOMI 4K/60Hz
- USB-A 3.2 Gen1 5Gbps(Max)
- Dimension 43 x 63 × 10 mm (L x W x H)
- Cable Length 300mm
- Weight 30g
PRODUCT DESCRIPTION
INSTRUCTIONS FOR USE
- Type-C interface instructions with power supply function; convenient and fast power supply; easy connection of high-power equipment.
- Instructions for use of U disk and memory card Connect this product to the USB3.0 interface of the computer, and then insert the U disk, at this time, the computer will pop up the drive letter of the U disk, click to enter, and you can copy, move, delete and other operations on the files inside.
- Instructions for use of mobile hard disk or mobile solid-state hard disk Connect this product to the USB3.0 interface of the computer, and then insert the mobile hard disk or mobile solid-state hard disk. At this time, the computer will pop up the drive letter of the mobile hard disk or mobile solid-state hard disk. Click to enter, and the files inside can be copied, moved and deleted, and so on.
- 4K HDMI Instructions After connecting this product with a laptop or tablet; connect the display device through a 4K HDMI cable (need to be purchased); at this time, the frequency projection function can be realized.
NOTICE
- Do not let any objects (such as combustibles, needles) or any liquids (such as water, beverages) enter or penetrate into the product, which will cause the product to not work normally.
- Do not use or place this product in the following places: humid environments (such as bathrooms, toilets); exposed to dusty environments and rotten objects.
- If the device is not used for a long time, put the product in a plastic bag and put it in the packaging box for storage to prevent dust accumulation and socket oxidation leading to poor contact of the socket.
FCC
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference
- This device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>