imation IMEH100 Portable Hard Disk Drive User Guide

imation IMEH100 Portable Hard Disk Drive

QUICK USER GUIDE

Thank you for purchasing imation Portable HOD. Please refer below for installation guide of proper and warranty policy.

How to Connect

• Turn on your computer and wait for it to finish loading.

• Connect the Type-C cable to the drive.

• Connect the Type-A cable to your computer.

• Follow any on-screen instruction to complete the hardware installation of your new Portable Hard Disk Drive. You can also verify the drive has been installed properly by doing the following.

  1. Windows
     On your desktop, double click “‘My Computer”, and verify that Portable Hard Disk Drive is listed along with your other drives.

  2. Mac
     Verify that the drive appears on your desktop.

• If the drive does not appear on your computer, please consult the PC or laptop manufacture’s documentation for installing USB storage devices.

Windows

1. From your desktop, click on the “Safely Remove Hardware” icon inside the system tray.
2. Click on the “USB Mass Storage Device”
3. The “Safe to Remove Hardware” message will now appear on your desktop and your drive can now be safely removed from the system.

Mac

1. Locate the External USB Hard Drive or the Removable Drive named “IMEH100”.
2. Click and drag the icon to the Trash or the Eject icon.
3. After the disk icon is no longer on the desktop, you can safely disconnect the drive’s USB cable from your computer.

Precautions

• Do not connect wrong USB cable to imation External HOD.
• Do not remove External HDD from the device while writing, reading or deleting data or LED indicator lighting is flashing.
• Do not strike, bend, drop, wet or apply excessive force to Portable HDD. This may cause losses or damages to the product.
• Do not disassemble or damage External HOD. If External HDD has been disassembled or damaged by the user, all warranties will be void.

Warranty Policy

• imation External HDD product is covered by 3-year limited warranty from the original purchase date. Pursuant to the terms of imation warranty policy. imation will provide proper warranty service if the product fails under normal use. For products that are out-of-warranty period hereunder. imation may refuse to provide any warranty service.

Warranty Limitations

• The warranty stated herein does not apply if any product failure is caused by

  1. Acts of improper use such as prolonged exposure to(* abnormal humidity and temperature)
  2. Malfunction of other equipment.
  3. Acts of nature.
  4. Defects or damages from moving or dropping after purchase.
  5. Damaged connector.

• Operational humidity/ temperature: RH90% / 0~45 ‘C

Warning and Precautions

• imation is not responsible for any cost caused by defects or damages of products from misuse or neglect. Moreover, never does responsibility apply to any data loss or recovery. It is your responsibility to always have backup copies of important data.
• • lGB=l,000,000,000(bytes) / l TB=l,000,000,000,000(bytes) Actual capacity may vary. Some capacity is used for memory maintenance and other functions, and is not available for storage.

www.imation.com
imation and the imation logo are trademarks of 0-jin Corp. other logos and trademarks are the property of their respective owner .

FCC Information to User

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution
Modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC Compliance Information : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>