GEBERIT HS05 Hygiene Flushing Device Sigma Instruction Manual

OPERATION MANUAL

Safety

About this document
This document is aimed at operators and users of the Geberit HS05 hygiene flush unit, mains or battery operation.
This document applies to the models of this hygiene flush unit as a WC flush control with Bluetooth® interface. The specification plate for the WC flush control is labelled with ‘DGWC-03-C’ or ‘DGWC-03-D’ and the Geberit Connect logo.

Intended use
The Geberit HS05 hygiene flush unit, for mains or battery operation, is intended for automatic, periodic water replacement in drinking water installations.
The Geberit HS05 hygiene flush unit, for mains or battery operation, is designed for installation in Geberit Sigma concealed cistern 12 cm.

Safety notes

• Operation, care and maintenance work may only be performed by the operator or user as described in this operation manual.
• Do not modify the product or add any additional modules.
• If there is any indication of damage or defects, never attempt a repair yourself.
• Repairs may only be carried out by a skilled person using original spare parts and accessories.
• FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

Product description

Technical data

| Mains operation| Battery operation1)
---|---|---
Nominal voltage| 85-240 V AC| —
Mains frequency| 50-60 Hz| —
Battery type| —| LR20
Operating voltage| 12 V DC| 3 V DC
Protection degree| IP45| IP45
Maximum power consumption| 4 W| 4 W
Power consumption in standby mode| 0.15 W| 0.15 W
Interval flush time, factory setting| 5 s| 5 s
Interval flush time, adjustment range| 1-200 s| 1-200 s
Interval flush, factory setting| 72 h| 72 h
Interval flush, adjustment range| 1-168 h| 1-168 h
Wireless technology| Bluetooth® Low Energy2)
Frequency range| 2400-2483.5 MHz
Maximum output power| 4 dBm

1. Battery service life: approx. 5 years
2. The Bluetooth® brand and its logos are the property of Bluetooth SIG, Inc. and are used under licence by Geberit.

Simplified EU declaration of conformity
Geberit International AG hereby declares that the radio equipment type of the Geberit HS05 hygiene flush unit, mains or battery operation, is compliant with EU Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following Internet address: https://doc.geberit.com/971253000.pdf.

Simplified UK declaration of conformity
Geberit International AG hereby declares that the radio equipment type of the Geberit HS05 hygiene flush unit, mains or battery operation, is in compliance with the Radio  Equipment Regulations 2017.
The full text of the UK declaration of conformity is available at the following Internet address: https://doc.geberit.com/971254000.pdf

FCC Declaration of Conformity
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.

Operation

Geberit Apps
Various Geberit apps are available for operation, settings and maintenance. The apps communicate with the device via a Bluetooth® interface.
The Geberit apps are available free of charge for Android and iOS smartphones in the respective App Stores.
Establish connection with device
▶ Scan the QR code and follow the instructions on the landing page.

| https://gbrt.io/dsvF905
---|---
https://gbrt.io/dsvF905

Actuate flush
A toilet flush is triggered manually by pressing the buttons on the actuator plate.
For testing purposes, the flush can also be actuated with a Geberit app.

Setting the interval flush
The Geberit HS50 hygiene flush unit is particularly suitable for buildings with high stagnation times in the drinking water pipes. It regularly replaces the drinking water in the pipes, thus preventing stagnation.
The flush interval and flush time are set with an Geberit app. The flush time must be selected such that the entire volume of the pipeline to be flushed is flushed.

Troubleshooting

► Interrupt the power supply (mains fuse) for 10 seconds.
Technical fault| ► Contact a skilled person.
WC ceramic appliance not being flushed out properly.| Flush volumes set incorrectly| ► Contact a skilled person.
WC ceramic appliance blocked with limescale| ► Descale the WC ceramic appliance.
Interval flush cannot be triggered.| Software fault| ► Interrupt the power supply (mains fuse) for 10 seconds.
Power failure| ► Check the power supply (mains fuse).
Batteries flatn| ► Replace the lifting device batteries. —> See “Replacing the batteries”, page 16.
Technical fault| ► Contact a skilled person.

1. The state of charge of the battery can be checked using a Geberit app.

Maintenance

Maintenance regulations
For Geberit HS05 hygiene flush units with battery operation, the batteries must be replaced approx. every 2 years.

Replacing the batteries
Prerequisite
– 2 replacement batteries (type 1.5 V mono/D/LR20/AM-1, recommendation:
Varta Industrial or Panasonic Powerline) are available.

1. Demounting the mounting frame. → See figure sequence 1 , page 159.

2. Disconnect the power supply cable.

3. Open the battery compartment.

4. Extract batteries and dispose of them appropriately.

5. Insert new batteries.

6. Close the battery compartment.

7. Insert the power supply cable.

8. Mount the mounting frame. → See figure sequence 2 , page 160.

Disposal

Constituents
This product meets the requirements of Directive 2011/65/EU (RoHS) (restriction of the use of certain hazardous substances in electrical and electronic equipment).

Disposal of waste electrical and electronic equipment
The symbol of the crossed-out wheeled bin means that waste electrical and electronic equipment (WEEE) must be disposed of separately and not with other non-recyclable waste.
End users are legally obliged to return old equipment to public waste disposal authorities, distributors, or Geberit for proper disposal. Many distributors of electrical and electronic equipment are obliged to take back WEEE free of charge. Contact the responsible sales or service company to return the WEEE to Geberit.
Used batteries and accumulators that are not enclosed within the old equipment, as well as lamps that can be removed from the old equipment in a non-destructive manner, must be separated from the old equipment before being handed over to a disposal point.
If personal data is stored on the old equipment, end users themselves are responsible for deleting it before handing it over to a disposal point.

Geberit International AG
Schachenstrasse 77, CH-8645 Jona
documentation@geberit.com
www.geberit.com

9007209121859979 © 09-2022
970.773.00.0(02)

References

• Geberit Gruppe

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>