ASUS OG RYUJIN III Series CPU Liquid Cooler User Guide

OG RYUJIN III Series CPU Liquid Cooler
User Guide

Package contents

NOTE: The Intel Mounting bracket comes pre-installed on the AIO Cooler.

AIO cooler installation

NOTE: The illustrations in this section are for reference only, but the installation steps remain the same.

Install the Intel backplate

Install the Intel standoff screws

Install the pump

For Intel 1700

For Intel 115X/1200

NOTE: We recommend installing the pump so that the water pipes of the pump face towards or away from you for optimal performance (motherboard positioned with rear IO ports on your left).

Remove the pre-installed heatsink mount

Install the AMD Mounting Bracket

Install the pump
For AMD AM4

For AMD AM5

NOTE: We recommend installing the pump so that the water pipes of the pump face towards or away from you for optimal performance (motherboard positioned with rear IO ports on your left).

Connect the 9-pin USB 2.0 cable

Connect the 4-pin fan cable

Remove HEX protection caps before installing the radiator

Install the radiator

Connect the 3-way/2-way fan cable

Download control software

Please visit the product support page at https://rog.asus.com/ to download and install the control software.

Support and FAQ

Q: What should I do if a CPU Fan Error error message pops up?

– A: Enter BIOS, then go to Monitor and set CPU FAN Speed to [Ignore].

References

• ROG - Republic of Gamers｜Global | For Those Who Dare
• ROG - Republic of Gamers｜Global | For Those Who Dare
• ROG - Republic of Gamers｜Global | For Those Who Dare

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>