SILVERCLOUD AP101 230V-12V 1A Power Supply Remote Control Instruction Manual
- June 10, 2024
- SilverCloud
Table of Contents
SILVERCLOUD AP101 230V-12V 1A Power Supply Remote Control
Product specifications
- Input: 220V AC 50Hz
- Output: 12 V dc / 5 mA
- Remote control distance: 50 m
Main functions
- Long -ange
- 2 remote controls
- Easy to install
- Pleasant and practical design
- Compatible with any type of electrical or electromagnetic lock
- Omni-directional remote control
- Automatic block of the lock after opening
- Save electricity
Operation method
- In order to open the door, push the button on the remote control. The door will automatically open.
- Add a new remote control: After plugging the receiver unit, within 10 seconds press and hold the button for 3 seconds on the new remote control. You can add multiple remotes in the first 10 seconds of the power receiver. After that, the receiver unit enters in the normal mode of functioning, while the remote controls can be used for opening the electromagnetic lock.
- Delete a remote control: After plugging the receiver unit, within 10 seconds press and hold the buttons for 5 seconds on the new remote control. After that the receiver unit does not register a signal from the deleted remote control.
Notes:
- If the remote control distance is low, replace batteries.
- To keep the device’s performance, do not drop the remote control or wet it.
- The cable connection between the remote transformer and the electromagnetic lock should not exceed 10 m.
- Do not power the remote transformer if it is in a moist environment.
- If the surface temperature of the power supply is high, unplug it for approximately 10 minutes.
Installation schema
EU Simplified Declaration of Conformity
SC ONLINESHOP SRL declares that Transformer SilverCloud AP101 complies with
the RED 2014/53/UE.
The full text of the EU declaration of conformity is available at the
following Internet address:
https://www.mypni.eu/products/3945/download/certifications
References
Read User Manual Online (PDF format)
Loading......