LABELMATE C7500 Unwinder Alignment Plate Instructions
- June 1, 2024
- LABELMATE
Table of Contents
LABELMATE C7500 Unwinder Alignment Plate
INSTRUCTION MANUALS
Arrange Alignment Plates
1. Position the Alignment Plates adjacent to each other with the shaped sides facing inward.
Position Printer
2. Set the printer on top of the Rewind Plate, inserting the two metal printer pegs into the holes in the Plate.
3. Slide the Unwind Plate inward beneath the printer until it abuts snugly against the printer feet.
Position Winders
4. Place Winders firmly in position next to the outer bars of the Alignment Plates.
5. Align the Winders with the printer by sliding them forward/backward as necessary until the rear base of the Winders is positioned at the 1.75” mark of the Alignment Plates.
Specifications:
- Model: Printer Alignment Kit 2000
- Material: High-grade plastic
- Compatibility: Works with all standard printers
- Dimensions: Alignment Plates – 10 inches x 5 inches, Winders – 6 inches x 3 inches
ALIGNMENT PLATES – EPSON C7500
FAQs (Frequently Asked Questions)
Q: Can this alignment kit be used with all printer models?
A: Yes, the alignment kit is designed to work with all standard printer models.
Q: How do I clean the Alignment Plates and Winders?
A: Use a damp cloth with mild detergent to wipe the surfaces of the plates and winders. Avoid using harsh chemicals that may damage the plastic material.
Q: What should I do if the Winders do not align properly with my
printer?
A: Try adjusting the position of the Winders by sliding them along the Alignment Plates until they align correctly with your printer. Ensure that the rear base of the Winders is at the specified 1.75 mark for proper alignment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>