BUZZISPACE BuzziSkin Printed Wallpaper Installation Guide
- June 1, 2024
- BuzziSpace
Table of Contents
BUZZISPACE BuzziSkin Printed Wallpaper
Product Information
Specifications
- Product Name: BuzziSkin Printed
- Model Number: 17 DoP_P0066-Skin-01
- Standard: EN15102 0493
- Type: Wall Covering
- Fire Rating: C-s2, do
- Passes Formaldehyde, VCM, and Heavy Metals tests
Product Usage Instructions
- Surface Preparation: Treat the surface with a water-based primer before applying BuzziSkin Printed for optimal adhesion results. Ensure the surface is smooth, dry, well-degreased, and free of dust.
- Batch Number: Keep notice of the batch number when opening the boxes for installation.
- Alignment: It’s not intended to align the image at the seams.
- Optional: Use wallpaper paste for easy positioning during installation.
- Arrow Direction: Keep notice of the arrow direction for proper placement.
- Variations: Variations in colour, thickness, and density may occur due to the nature of the product.
FAQ
-
Q: Can I make claims after installation?
A: No claims are accepted after installation. -
Q: What should I avoid during installation?
A: Avoid aligning the image at the seams and ensure the surface is properly prepared before application. -
Q: What should I do if I notice variations in colour or thickness?
A: Variations in colour, thickness, and density may occur naturally. Please proceed with the installation as normal.
Technical info
17
DoP_P0066-Skin-01
EN15102
0493
Wall Covering
www.buzzi.space
C-s2,do
Formaldehyde: pass
VCM: pass
Heavy metals: pass
- The felt layer of BuzziSkin Printed is made of 100% recycled PET bottles and has excellent acoustic characteristics.
- No claims concerning deviation in colour, size, and thickness can be accepted.
- Because of the nature of the product, this can vary. The risk is more likely in different batches.
- Even from the same batch, we can not guarantee that there will be no colour differences. However, the risk will be lower.
- Please specify the batch number if a re-order needs to be done.
- If possible we deliver from the same batch
USE
- BuzziSkin Printed can be used on all surfaces with the following exceptions.
- BuzziSkin Printed can not be applied on vinyl or any other plasticized surface.
- BuzziSkin Printed is not suitable as seating because it will become fluffy.
- We do not recommend installing BuzziSkin Printed to the ceiling or the floor.
INSTALLATION TIPS
- When opening the boxes keep notice of the batch number. (Charge number)
- After installation, no claims are accepted.
- It’s not intended to align the image at the seams.
Installation should be done by professionals!
- Please keep the direction of the BuzziSkin Printed in mind. This is printed on the back of the foil.
- Do not apply on bare, untreated surfaces. Treat the surface with water-based primer before applying BuzziSkin Printed for optimal adhesion results.
- The surface should be smooth, dry, well degreased and dust-free.
- Pre-measure the whole surface and cut the BuzziSkin Printed with a sharp knife.
- All corners must be made of separate lanes.
- For easy mounting, it is possible to use wallpaper paste but this is not necessary.
- BuzziSkin Printed is not intended to mask roughnesses
BuzziSkin Printed
Excluded Parts
Included Parts
Variations in colour, thickness and density may occur.
INSTALLATION
- Treat the surface with water-based primer before applying BuzziSkin Printed for optimal adhesion results. The surface should be smooth, dry, well degreased and dust-free.
- (optional)
- Keep notice of the arrow direction
INSTRUCTION
BuzziSpace Group NV Italiëlei 8, 2000 Antwerp Belgium
(+32 (0)3 846 10 00
[email protected]
www.buzzi.space
Doc nr.: A-0000001973/04
Last update : 07/12/2023