BUZZI SPACE P1 P1 Led Eu Instructions
- August 15, 2024
- BUZZI SPACE
Table of Contents
BUZZI SPACE P1 P1 Led Eu
Product Information
Specifications
- Product Name: BuzziZepp LED EU
- Power Supply: Primary (AC)
- Electrical Connection:
- L – Brown
- N – Blue
- Yellow/Green – Ground
- Dimming: Optional for 0-10V signal
- Electrical Cable: Secure steel cable
Product Usage Instructions
Electrical Connection
- Turn off the power supply.
- Connect the wires as follows:
- L (Brown) wire to the corresponding terminal.
- N (Blue) wire to the appropriate terminal.
- Yellow/Green wire to the ground terminal.
- If dimming is required, connect the optional 0-10V signal wires (Red and Blue).
- Secure the steel cable properly for safety.
LED Installation
- Ensure the power is off before proceeding.
- Connect LED 1 using the Black and White wires.
- If applicable, connect LED 2 using the Red and Blue wires.
Safety Precautions
- Avoid touching the LED to prevent permanent damage.
- Use ESD gloves to prevent electrostatic damage while handling sensitive components.
FAQ
-
Q: Can I replace the light source or driver myself?
A: The light source and/or driver should only be replaced by the manufacturer, their service agent, or a qualified person to prevent damage. -
Q: How do I prevent electrostatic damage?
A: Avoid touching the LED or stripped wire parts with bare hands. Always wear ESD gloves for insulation.
BuzziZepp LED EU
Instruction for LED line
Dimension
LED Installation
LIGHT SOURCE – DO NOT TOUCH LED
Touching the LED can result in permanent damage of the light source.
The light source and/or driver contained in this luminaire shall only be
replaced by the manufacturer or his service agent or a similar qualified
person.
PREVENTING ELECTROSTATIC DAMAGE
A discharge of static electricity may damage sensitive components.
Therefore do not touch the LED nor the stripped parts of the wires with bare
hands. Always be properly insulated by using ESD gloves.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>