Logicbus PET-7017-10/ET-7017-10 PoE PET Family Ethernet User Guide

: June 3, 2024
: Logicbus

Table of Contents

Logicbus PET-7017-10/ET-7017-10 PoE PET Family Ethernet
Configuring Boot Mode
Connecting to Network, PC and Power
Installing the MiniOS7 Utility
Using MiniOS7 Utility to Assign a New IP
Enabling Adobe Flash Player in Your Brower
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Logicbus PET-7017-10/ET-7017-10 PoE PET Family Ethernet

Logicbus PET-7017-10ET-7017-10 PoE PET Family Ethernet PRODUCT-
IMG

Congratulations on purchasing PET-7017-10/ET-7017-10 – 10/20 Channel Voltage and Current Analog Input Data Acquisition Module. The most popular automation solution for Ethernet remote monitoring and control application. This Quick Start Guide will provide information needed to get started with PET-7017-10/ET-7017-10. Please also consult the User Manual for detailed information on the setup and use of PET-7017-10/ET-7017-10

In addition to this guide, the package includes the following items: $Logicbus PET-7017-10ET-7017-10 PoE PET Family Ethernet FIG $1$$

Configuring Boot Mode

Init mode : For configuration. After booting, PET-7017-10/ET-7017-10 will not run the default firmware and cannot surf the internet. Use this mode to update MiniOS7 image.
Normal mode: For normal working. After booting, PET-7017-10/ET-7017-10 will run the default firmware and can use all PET-7017-10/ET-7017-10 functions.

Connecting to Network, PC and Power

The PET-7017-10/ET-7017-10 is equipped with an RJ-45 Ethernet port for connection to an Ethernet hub/switch and PC. $Logicbus PET-7017-10ET-7017-10 PoE PET Family Ethernet FIG $3$$

Installing the MiniOS7 Utility

Step 1: Get the MiniOS7 Utility tool

The MiniSO7 Utility can be obtained from companion CD or our site:
CD:\Napdos\minios7\utility\minios7_utility\
http://www.icpdas-usa.com/minios7utility.html

Step 2: Follow the prompts to complete the installation

After the installation has been completed, there will be a new short-cut for MiniOS7 Utility on the desktop.

Using MiniOS7 Utility to Assign a New IP

The PET-7017-10/ET-7017-10 are Ethernet devices, which comes with a default IP address, therefore, you must first assign a new IP address to the PET-7017-10/ET-7017-10.
The factory default IP settings are as follows:

Item	Default
IP Address	192.168.255.1
Subnet Mask	255.255.0.0
Gateway	192.168.0.1

Step 1: Run the MiniOS7 Utility $Logicbus PET-7017-10ET-7017-10 PoE PET Family Ethernet FIG $7$$

Double-click the MiniOS7 Utility shortcut on your desktop.

Step 2: Press “F12” or choose “Search” from the “Connection” menu

After pressing F12 or choosing Search from Connection menu, the MiniOS7 Scan dialog will appear, that will display a list of all the MiniOS7 modules on your network. $Logicbus PET-7017-10ET-7017-10 PoE PET Family Ethernet FIG $8$$ $Logicbus PET-7017-10ET-7017-10 PoE PET Family Ethernet FIG $9$$

Step 3: Choose the module name and then choose “IP setting” from the toolbar $Logicbus PET-7017-10ET-7017-10 PoE PET Family Ethernet FIG $10$$

Choose the module name for fields in the list, and then choose IP setting from the toolbar.

Step 4: Assign a new IP address and then choose “Set” button $Logicbus PET-7017-10ET-7017-10 PoE PET Family Ethernet FIG $11$$

Step 5: Choose “Yes” button

After completing the settings, press the Yes button in the Confirm dialog box to exit the procedure.

Enabling Adobe Flash Player in Your Brower

Your browser must support Adobe Flash Player and have it enabled in order to use the PET-7017-10/ET-7017-10 web site.
If you do not have it installed, please go to the following website and install it.
The Adobe Flash Player Download Center: http://get.adobe.com/flashplayer/

Go to the PET-7017-10/ET-7017-10 Web Site to Check out Functions

The PET-7017-10/ET-7017-10 contains an advanced web configuration system that provides users with access PET-7017-10/ET-7017-10 applications through a standard web browser.

Step 1: Start PET-7017-10/ET-7017-10 $Logicbus PET-7017-10ET-7017-10 PoE PET Family Ethernet FIG $14$$

Make sure the switch placed in the
Normal position.
Then reboot PET-7017-10/ET-7017-10

Step 2: Open a browser

Please use a standard internet browser to view the PET-7017-10/ET-7017-10 webpage, such as Mozilla Firefox or Internet Explorer…etc.
If you haven’t changed the default IP address of the PET-7017-10/ET-7017-10, please refer to “4. Using MiniOS7 Utility to Assign a New IP” to configure it.

Step 4: Fill out the User name and Password $Logicbus PET-7017-10ET-7017-10 PoE PET Family Ethernet FIG $15$$

Item	Default
User name	Admin
Password	Admin

After entering the IP address, the login dialog box will appear and prompt you to enter your username and password.
The factory default user name and password are as follows (Case sensitive) :

Step 5: Welcome to PET-7017-10/ET-7017-10 web site

After logging into the PET-7017-10/ET-7017-10 web site, the welcome page will appear. $Logicbus PET-7017-10ET-7017-10 PoE PET Family Ethernet FIG $16$$
Under the Main Menu, expand the Web HMI, and then select the Web HMI option to check the values of the data acquisition. $Logicbus PET-7017-10ET-7017-10 PoE PET Family Ethernet FIG $17$$