Logicbus TW5 True Wireless Headset User Guide
- June 3, 2024
- Logicbus
Table of Contents
TW5 True Wireless Headset
User Guide
Product Schematic
It Includes
- Bluetooth earphone
- Endurance charging box
- Micro 5 pin charging cable
- User’s manual
- Earplug silicone cap
Product Specifications
- Bluetooth V5. 1+2R+EDR+BLE
- Battery: Headset 3.7V/30mAh I Charging box 3.7V/300mAh
- Support mode: a2dp/avctp/avdtp/avrcp/hfp/spp/smp/att/gap/gatt/rfcom m/sdp/L2cap
- Sensitivity: -90dBm
- Transmission distance: >10 meters (in an ideal environment without any major obstacles) Play time: About 4 hours
- Call time: About 5 hours
- Standby time: About 40 hours
- Charging time: Charge the charging case for about 15 hours. and charge the headset for about I hour
- Charging box to charge the headset : single earphone About 6 times
Functional operation instructions
-
ON: Take the headset out of the charging case and automatically turn it on or press and hold the leftand right headset multifunction button for 3 seconds to turn it on.
-
Shutdown: Put the headset intothe charging box and turnit off automatically. Press V5h=crttoasnhdul Otwhne. ads’
-
Boot back:
When the pairings successful, the Bluetooth headset preferentially enters the connected state when the second time is turned on, and automaticallyconnects back to the connected mobile phone. -
Play / Pau.: In the standby mode,dick the button of left or right earphones to play or pause music.
-
Switch songs/volume up/down/enable Sin: When playing music, triple-click the multi-function button of each earphone to switch to the previous track and double-click the multi-function button each earphone to switch to the next track. Press and hold for two seconds to enable Sin.
-
Answer the call; When the phone calls incoming, click the left or right earphone multi-function keys to pick up the call.
-
Hang up the call: When the phone is in a calling, press the left and right earphone multi-function keys 2s to hang up the cal
-
Call reject: Wheearpin:r: IrDnhul;rfLcin’gnocncElynsVrrneggcrs’etOle eadtrr call.
-
Low battery prompt: When the battery of the Bluetooth headset is low, a low-battery tone will be played every 30 seconds until the headset is powered off.
Polling method
- Take out from the charging bin or press and hold the leftand right earphones multi-function button for 3 seconds fo turn on until the red and blue lightsflash alternately, entertheear search pairing state, enter the ear pair automatic matching, and match the main ear (right ear) The red and blue lightsare alternately flashing the secondary ear is flashing slowly, and the paired ear is successfully played.
- Start the Bluetooth function of the mobile phone or otherdexrices. If it is a Android mobile phone or device, gital. Stt:rn “Meocjilcehp fil? Lrturdcetv’icce tic:i”11 (Crulicc:ACiftilgy search for the device: when searching for the model of the Bluetooth headset After that, click to enter the painng: when the pairing is successful. the main (right) earphone will make a prompt to connect successfully. a. the lefit and right earphones will turn blue an.d. flash study!, and enter tne connection stamp,/ state. HTter painng successful. the main ear is the nght channel. Tfie secondary ear is the left channel.
- The two earphones can also be paired with the mobile phoneseparately. The operation method can be operatedaccording to the above step 2 operation method.
Charging operadon
- To Mioto USB charging line a plug in the USB port side of the charging box plug in charger to charging box, box of battery dharging in corresponding display the number above.
- Earpiece: put headphones in charge box can automatic charging, charging the headset indicator light is red after a full charge out; Charge box long blue. light bnght, when the headset on a full charge after charging boX all. blue indicator light go out.
Precautions
- Charge in a safe environment. When charging the charging boxplease charge the charging box separately from the USB charging cable as soon as the charging indicatorindicates full power, so as to avoid damage to the charging box after a longtime of charging.
- When playinq music, please adjust the music to the appropriate volume to avoid hearing damage at high volume for a long time.
- Try to avoid using the headset in a place with interference sources, otherwise it may affect the headphone signal.
- Try to avoid using this headset in a corrosive environment to avoid affecting the function of the headset.
Tips:
When you use this Bluetooth headset to listen to music or talk, Please pay
attention to adjust the volume properly, so as not to affect the hearing of
excessive volume!
FCC Statement
-
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation. -
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
SAR Information Statement
Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. * Tests for SAR are conducted with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government adopted requirement for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this model phone when tested for use at the ear is 0.396W/Kg and when worn on the body, as described in this user guide, is 0.472W/Kg(Body-worn measurements differ among phone models, depending upon available accessories and FCC requirements). The maximum scaled SAR in hotspot mode is 0.498W/Kg. While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement for safe exposure. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RFexposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID: 055TW5122 Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications Industry Asso-ciation (CTIA) web-site at http://www.wow-com.com. In the United States and Canada, the SAR limit for mobile phones used by the public is L6 watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a sub-stantial margin of safety to give additional protection for the public and to account for any variations in measurements.
Body-worn Operation
This device was tested for typical body-worn operations. To comply with RF
exposure requirements, a minimum separation distance of 10mm must be
maintained between the user’s body and the handset, including the antenna.
Third-party belt-clips, holsters, and similar accessories used by this device
should not contain any metallic components. Body-worn accessories that do not
meet these requirements may not comply with RF exposure requirements and
should be avoided. Use only the supplied or an approved antenna.
Warranty Certificate Terms and Conditions
LOGIC warrants that their Products will be free from defects in material and
workmanship. The warranty period is one (1) year for the products and three
(3) months for the accessories which are part of the original package
including the battery. The warranty period begins the date of purchase by the
End-User who shall present an invoice or a purchase receipt when requiring
warranty service otherwise the warranty period will begin from the date of
manufacture of the product. LOGIC will repair a product without cost to the
customer if it presents a manufacturing defect or defect in workmanship during
the warranty period and if the defect occurred under normal conditions of use
in accordance with the instructions and specifications stated in the user’s
manual.
For additional information about the terms and conditions of LOGIC’s Limited
Warranty or to obtain warranty service information, please visit the support
section at: logicmobility.com
logicmobility.com
Made in China
Copyright Swagtek, Inc. 2022
Documents / Resources
|
Logicbus TW5 True Wireless
Headset
[pdf] User Guide
TW5 True Wireless Headset, TW5, TW5 Headset, True Wireless Headset, Wireless
Headset, True Headset, Headset, Earbuds
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>