OV7695 VGA Ultra-Compact Cost-Effective Secondary Camera Owner’s Manual
- June 1, 2024
- Support
Table of Contents
- OV7695 VGA Ultra-Compact Cost-Effective Secondary Camera
- Ultra-Compact, Cost-Effective Secondary Camera Solution for Smartphones
- Applications
- Technical Specifications
- Product Features
- Functional Block Diagram
- Specifications:
- Q: Can the OV7695 be used as a primary camera in devices?
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
OV7695 VGA Ultra-Compact Cost-Effective Secondary Camera
OWNER’S MANUAL
OV7695 VGA Ultra-Compact Cost-Effective Secondary Camera
Ultra-Compact, Cost-Effective Secondary Camera Solution for Smartphones
and Tablets
The OV7695 is a high-performance CameraChip™ sensor that utilizes OMNIVISION’s new OmniBSI™+ pixel architecture to deliver high quality VGA video at 30 frames per second. At just 2.4 mm x 2.3 mm, the cost-competitive OV7695 is a highly attractive solution for front-facing cameras in smartphones and tablets.
The 1/13-inch VGA sensor is built on a 1.75-micron OmniBSI™+ pixel, which has a significantly lower level of noise when compared with traditional FSI pixel architectures. The result is a dramatic improvement in dynamic range, which translates into higher quality color video. Using proprietary technology to improve image quality, the OV7695 reduces or eliminates common sources of image contamination such as fixed pattern noise and smearing to produce a clean, stable color image.
The sensor provides full-framed, sub-sampled and cropped images in YUV422 format via a one-lane MIPI interface. All required image processing functions, including exposure control, gamma, white balance, color saturation, defective pixel canceling, and noise canceling are programmable through the serial camera control bus (SCCB) interface.
Find out more at www.ovt.com.
Applications
- Cellular and picture phones
- PC multimedia
- Tablets
- Toys
- Digital video cameras
Technical Specifications
-
Active array size: 640 x 480
-
Maximum image transfer rate:
– VGA (640 x 480): 30 fps
– QVGA (320 x 240): 60 fps
– QQVGA (160 x 120): 120 fps
– HF (640 x 20): 120 fps -
Power supply:
– analog: 2.8V ±5%
– core: 1.5V DC ±5% (internal regulator)
– I/O: 2.8V, 1.8V -
Power requirements:
– IDD-A: 15 mA
– IDD-IO: 20 mA
– XSHUTDOWN: 5 µA -
temperature range:
– operating: -30°C to +70°C junction temperature
– stable: 0°C to +50°C junction temperature -
Output formats: YUV422, RAW RGB
-
Lens size: 1/13″
-
Lens chief ray angle: 26.11°
-
Scan mode: progressive
-
Pixel size: 1.75 µm x 1.75 µm
-
Image area: 1148 µm x 868 µm
Product Features
-
support for image sizes:
– VGA (640 x 480)
– QVGA (320 x 240)
– QQVGA (160 x 120)
– HF (640 x 20) -
support for output formats:
– YUV422, RAW8 through MIPI
– YUV422, RAW8, RAW10 through OMNIVISION’s proprietary SPI -
On-chip phase lock loop (PLL)
-
Built-in 1.5V regulator for digital block
-
Capable of maintaining register values at software power down
-
Programmable controls for:
– frame rate
– mirror and flip
– AEC/AGC
– windowing -
Support for horizontal and vertical sub-sampling
-
Automatic image control functions:
– automatic exposure control (AEC)
– automatic white balance (AWB)
– automatic black level calibration (ABLC) -
Image quality controls:
– defect pixel correction
– lens shading correction -
Support for black sun cancellation
-
Standard serial SCCB interface
-
Parallel I/O tri-state configurability and programmable polarity
Functional Block Diagram
Specifications:
- Model: OV7695
- Resolution: VGA
- Frame Rate: 30 frames per second
- Pixel Architecture: OmniBSI+
- Pixel Size: 1.75-micron
- Interface: MIPI
- Image Format: YUV422
- Dimensions: 2.4 mm x 2.3 mm
4275 Burton Drive Santa Clara, CA 95054 USA
Tel: + 1 408 567 3000 Fax: + 1 408 567 3001
OMNIVISION reserves the right to make changes to their products or to discontinue any product or service without further notice. OMNIVISION and the OMNIVISION logo are registered trademarks of OmniVision Technologies, Inc. CameraChip and OmniBSI are trademarks of OmniVision Technologies, Inc. All other trademarks are the property of their respective owners.
Q: Can the OV7695 be used as a primary camera in devices?
A: The OV7695 is primarily designed for front-facing camera applications in smartphones and tablets. It is recommended for secondary camera use.
Q: How to troubleshoot common image quality issues with the OV7695?
A: Ensure proper configuration of image processing functions through the SCCB interface. Check for any physical obstructions or contaminants on the sensor or lens.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>