ansluta 023744 Flexible Work Lamp LED User Manual

ansluta 023744 Flexible Work Lamp LED User Manual

Jula AB reserves the right to make changes to the product. Jula AB claims copyright on this documentation. It is not allowed to modify or alter this documentation in any way and the manual shall be printed and used as it is in relation to the product. For the latest version of operating instructions, refer to the Jula website.

SAFETY INSTRUCTIONS

• Do not look directly into the light source.
• Do not point the beam at the eyes of people or animals.
• Store out of the reach of children.
• Intended for indoor use.
• Do not charge the product outdoors.
• Do not use the charger to charge other products.
• Only use the supplied charger to charge the lamp.
• The power switch should be switched off when charging, otherwise the lamp can be damaged.
• Never cover the lamp glass or reflector when in use.
• Do not attempt to replace the battery.
• The product must be discarded if the glass cover is cracked.
• Discard the product if the power cord is damaged.
• The product must only be used in rooms with an ambient temperature of max 25°.
• The LED light source is not replaceable. The entire product must be replaced when the light source has reached the end if its life span.
• The product is not intended to be used as general lighting.

CHARGING

Make sure to do the charging in a suitable place and to use the right charger. Never connect an unknown charger, or a charger, charging cord or battery that can be suspected to be defective. Otherwise there is a risk of overheating, and in the worst case fire. Do not leave the battery unattended when charging. See website of Swedish National Electrical Safety Board for further information.

SYMBOL

| Read the instructions.
---|---
| Approved in accordance with the relevant directives.
| Recycle discarded product in accordance with local regulations.
| Do not look directly into the light source.

TECHNICAL DATA

Rated voltage: 5v
Output: 8W
Battery capacity: 2000 mAh
Battery life: 2-4 h
Battery status: Red/green LED indicator
Charging time: 2-5 h
Luminous flux:  500/1000 Im
Colour temperature:  6000/6500 K
Weight:  0.32 kg

DESCRIPTION

• This flexible LED work lamp has two light modes of 500 Im and 1000 Im.
• There is a magnet on the bottom of the handle that makes it easy to mount on an optional magnetic surface.
• The arm bends, which makes it easier to direct the light.

PACKAGE CONTENTS

• flexible 110 work lamp
• Charging cable
• Manual

USE
HOW TO USE
Press the power switch to switch the lamp on and off.

BATTERY CHARGING

• The battery must be charged before using for the first time.
• Connect the charger to the charging port on the handle.
• The charging time is 2 to 5 hours.

WWW.JULA.COM
© JULA AB 2022-09-07
JULA AB BOX 363, 532 24 SKARA, SWEDEN

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>