PROGRESS LIGHTING P400343-009 Five Light Brushed Nickel Etched White Contemporary Chandelier Instruction Manual
- June 12, 2024
- PROGRESS LIGHTING
Table of Contents
PROGRESS LIGHTING P400343-009 Five Light Brushed Nickel Etched White
Contemporary Chandelier
PACKAGE CONTENTS
PART| DESCRIPTION| QUANTITY|
---|---|---|---
P400341| P400343
A| Fixture| 1| 1
B| Glass Shade| 5| 5
C| Socket ring| 5| 5
D| Stem| 1| 1
E| Tube| 1| 1
F| Chain loop| 1| 1
HARDWARE CONTENTS (not actual size)
Safety Information
Please read and understand this entire manual before attempting to assemble,
operate or install the product.
CAUTION: Read instructions carefully and turn the electricity off at the
main circuit breaker panel before beginning installation.
CAUTION: Risk of fire. Min. 90°C supply conductors. Consult a qualified
electrician to ensure the correct branch circuit conductor.
WARNING: If any Special Control Devices are used with this fixture,
follow instructions carefully to assure full compliance with
N.E.C. requirements. If there are any questions, contact a qualified
electrical contractor.
CAUTION: All glass is fragile. Use care when handling glass shades and
bulbs.
Preparation
- Before beginning installation, make sure all parts are included using the contents diagrams from page 1. If any part is missing or damaged, do not attempt to assemble, install or operate the product.
- Estimated assembly time: 30 minutes.
- Tools required for assembly (not included): Phillips screwdriver, pliers, wire stripper, safety glasses, electrical tape, ladder.
Care and Maintenance
Shut off the main power supply before cleaning the product or changing light
bulbs. To clean, wipe with a damp cloth. Do not use abrasive cleaners or
cleaners that contain alcohol.
Assembly Instructions
-
Install the chain holder (EE) onto the nipple (FF). Next, loosely thread the hex nuts (AA) onto the nipple (FF) and then thread this assembly onto the mounting strap (CC). Install this assembly to the outlet box using the mounting screws supplied with the outlet box (not included).
-
In this step, you will adjust the depth of the chain holder in relation to the canopy depth. Take the canopy (JJ) and slip it over the chain holder (EE). You will need to adjust the chain holder so at least 1/4″ of the threaded portion is exposed
through the canopy hole. This is done by adjusting the depth of the nipple (FF) on the mounting strap (CC). When the chain holder (EE) is correctly adjusted, remove the canopy (JJ) and tighten the top hex nut (A) against the mounting strap (CC) and the bottom hex nut (AA) against the chain holder (EE). -
Equally, adjust the arms by carefully turning them
NOTE: During this step, determine the hanging length of your fixture by removing chain links GG) and optionally cut the electrical and ground wire Do NOT cut electrical or ground wires until this overall length is determined. Leave AT LEAST 6 inches MINIMUM of wire past the chain holder (EE) to allow for easy connections in ste05 chain links can be spread open with z pairs of pliers Twist the split link ends in opposite directions and dost by squeezing them back together.) -
Once the hanging length is determined, pass the wires through the stem, tube it out of the chain loco Fin tighten the stem o onto the hex coupling of the fixture (F) to secure it tightly. open chain link at one end of chain co. attach the chain link to chain woot, close the chain links Oack together with the pliers. Attach the other end of the chain cold chain holder ace onto the quicK ink in, dose the quick link. You can now weave the wires through every third chain link so. continue to pass the wires AND chain
-
Strips of insulation from the electrical vire ends. Using wire nuts (BB), connect the RIBBED fixture wire Ato the While supply wire from the outlet box: connect the swoon cloture wire to the black sucky wire. Connect the fixture ground wire and supply ground vare usine a wire nut or by fastening to the ground screw on the mounting strap.
-
Tuck the wires into the junction box and slip the canopy (JJ over the chain holder. Thread the screw collar (DD) onto the chain holder to secure the canopy tightly to the ceiling. Attach the glass shades (B) onto the socket of fixture (A), and use the socket ring (C) to secure it tightly. Thread the lamps (not included) into the fixture sockets.
-
Use 60-watt MAX incandescent medium base, SBCFL, or BLED.
WARRANTY AND EXCLUSIVE REMEDY
Progress products, when properly installed and under normal conditions of use, are warranted to our customers only to be free from defects in material and workmanship at the time of shipment. All warranty claims must be asserted within one year from the date of purchase of the subject items; thereafter, warranty claims will not be honored. The customer’s sole remedy for a warranty claim or otherwise shall be limited to repair or replacement of the subject product if it is shown to have been defective in material or workmanship at the time of shipment. Progress’s sole and maximum liability for a defective product shall never exceed the cost of the subject product. EXCEPT FOR SUCH A WARRANTY AND EXCLUSIVE REMEDY AS STATED (AND THE EXPRESS WARRANTY OF TITLE), WE DISCLAIM ALL OTHER WARRANTIES, WHETHER EXPRESS OR IMPLIED, SPECIFICALLY DISCLAIM THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL WE BE LIABLE TO THE CUSTOMER IN WARRANTY, CONTRACT, NEGLIGENCE, STRICT LIABILITY, OR OTHERWISE, FOR ANY DAMAGES, WHETHER INCIDENTAL OR CONSEQUENTIAL, WHICH ARE ALLEGED TO BE CAUSED BY ONE OR MORE OF OUR PRODUCTS, BEYOND THE COST TO THE CUSTOMER OF THE SUBJECT PRODUCT OR PRODUCTS. Therefore, the customer’s sole and exclusive remedy against us for breach of the warranty, breach of contract or negligence or strict liability or otherwise shall be limited to repair or replacement of the subject product at our option (excluding installation and removal charges which shall not be our liability) or, if we choose, refund of the purchase price. In no case does our warranty and exclusive remedy extend to anybody other than our customers? Our customers are not authorized to extend warranties or remedies on our behalf to anyone. Such unauthorized extensions of warranties or remedies by the customer shall remain the customer’s responsibility. The customer is responsible for determining the suitability of our products for the customer’s use or resale, or for incorporating them into objects or for applications that the customer designs, assembles, constructs, or manufactures.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>