blinds2go Twist2Go Roller Blinds Installation Guide
- June 13, 2024
- blinds2go
Table of Contents
**blinds2go Twist2Go Roller Blinds Installation Guide
**
Fitting a Twist2Go Roller Blind
We’ve made a handy video version of this section too!
Again, if you prefer to print the instructions or simply to follow step-by- step, just keep reading.
Insert the blind into the recess at an angle and push the tightener against the wall.
Lift the control end of the blind until level and release pressure, the blind will hold itself in place.
Make adjustments to the position of the blind so that it is straight and level, before locking it in place.
For smaller blinds:
Hold the blind securely in place and turn the tightening wheel to tighten the blind in place.
Turn the wheel clockwise relative to the roller tube
Top Tip
Make sure that you tighten the wheel as much as you possibly can so that the
blind remains secure and does not slip.
For larger blinds:
Hold the blind securely in place and turn the tightening wheel to tighten the blind in place.
Turn the wheel clockwise relative to the roller tube
Once the blind is secured in place, turn the end cap until it locks against the tightening wheel. This will lock the tightening wheel in place.
Turn the cap anti-clockwise relative to the roller tube.
Child Safety
Cord Tensioner
The cord retaining device must be installed at the maximum distance possible from the control mechanism to prevent looped cords from becoming slack.
Place the retaining device on the wall and mark the position of the screw hole(s) with a pencil.
Attach the retaining device to the wall using the fixings provided.
WARNING
Young children can be strangled by loops in pull cords, chains, tapes and inner cords that operate the product.
To avoid strangulation and entanglement, keep cords out of the reach of young children. Cords may become wrapped around a child’s neck.
Move beds, cots and furniture away from window covering cords.
Do not tie cords together.
Make sure cords do not twist and create a loop.