Progress Lighting P2673-01 DC Ceiling Fan WIFI Module Installation Instructions

Progress Lighting P2673-01 Voice Control Ceiling Fan

WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER

WIFI Module installation

1. Place the Receiver upside down on a flat surface, to expose the Receiver Screw.
2. Remove and keep the Receiver Screw (Figure 1).
3. Slide the Blank off of the Receiver and dispose of the Blank
4. Flip the Receiver over to expose the Receiver Female Connector.
5. Slide the WIFI Module Male Plug into the Receiver Female Connector to engage the Module (Figure 2).
6. With the WIFI Module Connected to the Receiver, turn the Receiver upside down on a flat surface for reinstallation of the screw (Figure 3).
7. Reinstall the Receiver Screw into the WIFI Module to secure Module to the Receiver (Figure 3). The WIFI Module Installation is Complete.

Syncing Remote Control & WiFi Module

PAIRING THE HAND-HELD REMOTE CONTROL and WIFI Module

NOTE: The WIFI Module needs to be paired with the hand-held remote control. Within 60 seconds of turning the Receiver AC power ON, press and hold the Transmitter FAN OFF(Stop) button for at least 5 seconds. The light kit will flicker to confirm. The WIFI Module will learn the same frequency that the transmitter has set up. After completion of above operation, you can operate the ceiling fan and light.

SMART PHONE CONTROL SETUP

Install the BOND HOME app

1. To enjoy all the potential of your new device, you will need to download the BOND HOME app (available on the Google Play Store and Apple App Store)
2. Use the QR code shown below to download the app, or you can download the app using this link: http://bondhome.io/app
3. After you download the app, create an account.
   NOTE: Keep your account credential information. You will use this information when you connect with your smart speaker.

Pair the Device to the WIFI

1. After you log into the main page, select the ”＋” symbol (IOS: top right corner of the screen) (Android: bottom center of screen).
2. Next you will see the “Add a new device” screen. Choose the Smart by Bond option in the middle of the screen. Then follow “Connect to Bond Config Wi-Fi” steps to continue pairing.
3. After the paring process with Wi-Fi receiver, then you can control the fan speed, light.

functions on the app.

Re-pairing the device (New router or moving the ceiling fan control)

1. Within 60 seconds of turning the power on, press and hold the Fan Off (Stop) button for at least 5 seconds. The light will flicker to confirm.
2. Follow the steps from step 2.1 to re-pair the device

For the latest and most complete instructions visit the resources section of the P2673 product page at www.hubbell.com/progresslighting

For more setup support, access the Help Center in the BondHome App Settings section

VOICE CONTROL SETUP

Setting up and Using Amazon Echo

1. Open the Bond Home App
2. Go to the Amazon Alexa app. Click on the dropdown menu from the top left corner of the screen and choose “Skills & Games”.
3. Select the magnifying glass on the top of the screen. Type BOND HOME into the search bar and click the search button. Next click on the Bond Home skill and choose to add the skill.
4. You should be prompted to enter your BOND username and password.
5. You should see a “Discover Devices” pop up. Select the “Discover Devices” option. You should then see your device listed in the “All Devices” section. If your devices are not found select the “+” followed by “Add Device”, “Other” and “Discover Devices”.

Setting up and Using Google Home

1. In the Google Home app, click on the Home icon from the bottom left corner of the screen and select the “+” symbol in the top left corner of the screen.
2. Select “Set up Device”. Then select “Works with Google”.
3. Select Bond Home from the list of devices. DO NOT select Bond Smart Home as it will not work with the product.
4. You should be prompted to enter your BOND username and password to authenticate. Once the pairing is complete, your device should appear.

Fan Voice Command Examples:

• “Alexa, turn on MY FAN to low”
• “Ok Google, turn MY FAN to speed 3” “Alexa, turn on MY FAN breeze”

Fan Light Voice Command Examples:

• “Ok Google, turn on MY FAN LIGHT”
• “Alexa, turn MY FAN LIGHT to 80%”
• “Ok Google, turn off MY FAN LIGHT”

For the latest and most complete instructions visit the resources section of the P2673 product page at www.hubbell.com/progresslighting

For more setup support, access the Help Center in the BondHome App Settings section

FAQs

What is the brand of the ceiling fan?

The brand is Progress Lighting.

What is the weight of the item?

The item weighs 0.8 ounces.

What is the color of the ceiling fan?

The color is gray.

Is it compatible with smart home systems?

Yes, it's compatible with Amazon Alexa, Google Home, iOS/Android, Siri, Control4, ELAN, and Hubitat.

What is Smart by Bond?

Smart by Bond is our trusted partner that supports the app for controlling the ceiling fan.

How easy is the installation?

The installation is stress-free with a fully-illustrated step-by-step guide provided.

Are batteries included? Are they required?

Yes, batteries are included and are required for operation.

Can it be controlled remotely?

Yes, you can control it via a mobile app and voice control.

What type of motor does it pair with?

It pairs with a DC motor PCBA that accepts the module, such as the P250060 Ryne 52in. Ceiling Fan.

What is the control method?

The control method is through an app.

What is the warranty?

It comes with a 1-year limited warranty.

Where is the product manufactured?

The product is made in Taiwan.

Download This PDF Link:  Progress Lighting P2673-01 Voice Control Ceiling Fan Installation Instructions

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>