ZMJH S005-B3 Heated Toilet Seat with Night Light Owner’s Manual
- June 1, 2024
- ZMJH
Table of Contents
ZMJH S005-B3 Heated Toilet Seat with Night Light
PRODUCT INFORMATION
NAMES OF PARTS
Parts List
- Main body
- Seat Components
- Owner’s Manual
- Power Adapter
PRODUCT DIMENSIONS
For the adjustable range of installation, please refer to the marked area. The length is 18.35″-18.9″ and the width is 5.35″-6.45″
PRECAUTIONS
- Please make sure you read the instructions carefully and install it properly.
- The water pressure limit is from 0.08 to 0.8MPa (11.6-116PSI). Please use as instructed.
PRE-INSTALLATION
- Take the components out of the plastic bag. Insert the bolts into the adjustable washers as illustrated.
- Open the hinge covers.
- Insert the bolts with the adjustable washers into the hinge mounting holes.
INSTALLATION PROCEDURE
- Insert the bolts with the adjustable washers into the hinge and then into the toilet mounting holes.
- Adjust the seat cover according to the position of the toilet bowl to correspond
- Hold the bolt with a slot screwdriver to prevent it from turning while tightening the nut and washer by hand until snug. Then tighten a bit more with the screwdriver.
- Close the hinge covers.
PRODUCT OPERATION
Nightlight Setting
- Plug into an outlet, and the nightlight works;
- Turn the nightlight on/off by pressing the button twice successively.
Seat Temperature Setting
- Plug into an outlet, the seat temperature works at 38°;
- Turn the seat temperature on/off by pressing the button continuously for 2S,
- To adjust the seat temperature, gently press the button. Each time the button is pressed, the button will be lit, representing different levels of temperature;
- Temperature adjustment cycle: Low in blue/ Mid in purple/ High in red.
Tips: Temperature setting (Low:36°/Mid:38°/High:40°)
CLEANING
Clean the bidet with a sponge or soft cloth with diluted kitchen detergent or glass cleaner. Do not use harsh petroleum products or anything abrasive. Avoid using chlorine or bleach for cleaning.
MAINTENANCE
Self-diagnosis and Troubleshooting
Caution
Do not attempt to disassemble or repair the unit.
SPECIFICATIONS
Contact Us
Any questions contact: cs@zmjh-bidet.com.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>