Danfoss CD-ST Fittings for Alupex Tubing Instructions
- June 1, 2024
- Danfoss
Table of Contents
Danfoss CD-ST Fittings for Alupex Tubing
Installation Instructions
Operating Info
- Operation conditions as specificed by the tube manufacturer, however Pmax = 6 bar, Tmax = 95° C
Installation Diagrams Information
- First diagram illustrates the correct angle of 90 degrees to cut the tubing.
- Second diagram shows the proper method of peeling the tubing with a tool.
- Third diagram depicts the correct assembly of the fitting components.
- Fourth diagram demonstrates the appropriate way to tighten the fitting with a wrench.
- Fifth diagram represents the correct bending radius (max. 65mm – 95°C) for the tubing.
- Sixth diagram highlights that using pliers to tighten the fitting is the incorrect method.
- Lastly, a warning sign indicates the importance of following the instructions.
FAQ
- What is the maximum operating pressure for Alupex tubing fittings?
- The maximum operating pressure is 6 bar.
- What is the maximum operating temperature for these fittings?
- The maximum operating temperature is 95°C.
- Is there a specific tool recommended for peeling the tubing?
- Yes, the instructions depict a specific peeling tool that should be used for preparing the tubing.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>