Promitto LIGHTING 110025 Linear LED Lighting User Manual
- June 1, 2024
- Promitto LIGHTING
Table of Contents
Promitto LIGHTING 110025 Linear LED Lighting
Product Information
LEDLINE FLEX 1010 has a vertical bending with diameter of 150mm. 3-side
emitting design provides a wider beam angle for a more uniform and extensive
lighting effect.
IP68 protection by full Polyurethane coating, UV resistance, and solvents
resistance ensure the durability in various environments.
Equipped with a 2-Step MacAdam bin and dot free lighting technology ensures
exceptional lighting performance.
Specifications
Voltage | DC24V |
---|---|
Length | 5 meters |
Max run length | 12M |
Width x Height | 10mm x 10mm |
Unit cut | 41,67 mm |
Power | 10W/m |
Colour temperature | 2700K |
Lumen | 715 lm/m |
Beam angle | 3-side emitting |
IP class | IP68 |
Ambient temperature | -25°c to + 50°c |
LED type, quantity | Neon, 144 LED/m |
CRI | >90 |
Lifetime | >54.000 hours (L70) |
Dimmable | Yes |
Certificates | CE, RoHS |
Warranty | 5 years |
Used electrical and electronic products, including all types of batteries, must be delivered for recycling at a separate collection point. (acc. to directive 2012/19/EU and 2006/66/EC).
Instruction
Please make sure that during installation, the bending direction will never
change. The product is TOP bending only, and it can’t be twisted or bended
sideways.
LEDLINE FLEX shall not be bendt sharply since it may cause product damage.
The minimum bending diameter is max 150mm.
During the installation, the
LEDLINE FLEX can not be:
- Twisted
- Dropped
- Bent at a 90°angle or bent at all
- Sagging/Hanging down
Please make sure the product does not stick with any paper related material
directly.
Clean the surface.
The surface needs to be dry before installation.
Remove the tape
Press the LED-strip firm, but gently with the palm of your hand
To avoid bending of the LED-strip it is recommended to be two persons during
the installation
Lighting made simple
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>