Promitto LIGHTING 360 Degree Portable Worklight User Manual
- June 9, 2024
- Promitto LIGHTING
Table of Contents
Promitto LIGHTING 360 Degree Portable Worklight
Portable 360° Worklight and tripod system with 300W or 600W providing 40.000 or 80.000 lumen. Flicker free lighting mounted on a 3 meters telescopic tripod. Lightweight and compact. Suitable for rough environments as well as indoor events. This manual is to be read before use and retained for future use.
Specifications
| Voltage | 220-240V |
|---|---|
| Tripod height | 3 meters |
| Tripod material | Aluminum |
| Brightness | 40.000 lm (3LED) or 80.000 lm (6LED) |
| Power | 3 x 100 W or 6 x 100W |
| Colour temperature | 4000K |
| Beam angle | 360° |
| IP class lighting head | IP65 |
| IP class power connection | IP44 |
| Ambient temperature | -20°c to +50°c |
| Lifetime | 30.000 hours |
| Dimmable | Yes |
| Tripod weight | 11 kg |
| 600W Head light weight | 14,5 kg |
| 300W Head light weight | 9,5 kg |
| Certificates | CE |
IN THE BOX
ASSEMBLY INSTRUCTION
Safety warning
Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep this document for future reference and only use the product as described in this document. Any other use of the product than described in this manual may damage the product or cause injury to the user [e.g. due to a short circuit, fire or electric shock). Disconnect the product from the power source if problems occur. Do not drop the product and avoid bumping. Do not use the product if a part is damaged or defective. Replace a damaged defective product immediately. When a non-standard power installation is needed this should be performed by a qualified technician. Make sure the product is sufficiently ventilated during use. Never cover an electrical [LED) device during usage since it can generate heat causing damage. LED lighting can be extremely bright and may cause serious eye damage so do not look directly into the lights. Keep the product out of reach of children or animals.
Cleaning and maintenance
Do not use cleaning solvents or abrasives. Do not clean the inside of the device. Do not attempt to repair the device when the device does not operate correctly. Replace it. Clean the outside of the device using a soft, damp cloth [don’t use a microfiber cloth).
Support
Promitto Group AS
Phone: +47 67 41 11 90 or visit our website:
www.promitto.group