Promitto LIGHTING 140005 360 Degree 40K 3LED Worklight User Manual
- June 9, 2024
- Promitto LIGHTING
Table of Contents
140005 360 Degree 40K 3LED Work light
User Manual
360° 40K 3LED Worklight
Artur: 140005
EAN: 7090049800207
140005 360 Degree 40K 3LED Work light
Portable 360° Work light and tripod system with 300W providing 40.000 lumen.
Flicker free lighting mounted on a 3 meters telescopic tripod. Lightweight and
compact.
Suitable for rough environments as well as indoor events.
This manual is to be read before use and retained for future use.
Specifications
| Voltage | 220-240V |
|---|---|
| Tripod height | 3 meters |
| Tripod material | Aluminum |
| Brightness | 40.000 lm (3LED) |
| Power | 3 x 100W |
| Colour temperature | 4000K |
| Beam angle | 360° |
| IP class lighting head | IP65 |
| IP class power connection | IP44 |
| Ambient temperature | -20°c to +50°c |
| Lifetime | 30.000 hours |
| Dimmable | Yes |
| Tripod weight | 11 kg |
| 300W Head light weight | 9,5 kg |
| Certificates | CE |
Used electrical and electronic products, including all types of batteries, must be delivered for recycling at a separate collection point. (acc. to directive 2012/19/EU and 2006/66/EC).
Assembly
Safety Regulations
Safety warning
Ensure you have fully read and understood the instructions in this document
before you install or use the product. Keep this document for future reference
and only use the product as described in this document. Any other use of the
product than described in this manual may damage the product or cause injury
to the user [e.g. due to a short circuit, fire or electric shock). Disconnect
the product from the power source if problems occur. Do not drop the product
and avoid bumping. Do not use the product if a part is damaged or defective.
Replace a damaged defective product immediately.
When a non-standard power installation is needed this should be performed by a
qualified technician. Make sure the product is sufficiently ventilated during
use. Never cover an electrical [LED) device during usage since it can
generate heat causing damage. LED lighting can be extremely bright and may
cause serious eye damage so do not look directly into the lights. Keep the
product out of reach of children or animals.
Cleaning and maintenance
Do not use cleaning solvents or abrasives. Do not clean the inside of the device. Do not attempt to repair the device when the device does not operate correctly. Replace it. Clean the outside of the device using a soft, damp cloth [don’t use a microfiber cloth).
Support
Prietto Group AS
Phone: +47 67 41 11 90 or visit our website:
www.promitto.group
Lighting made simple
www.promitto.group