IKEA ÖSTVEDA Integrated Dishwasher Instruction Manual

IKEA ÖSTVEDA Integrated Dishwasher

INFO

www.ikea.com

Using Maintenance

Product Description

1. Third spray arm
2. Lower spray arm
3. Filters
4. Rating plate
5. Salt container
6. Rinse aid dispenser
7. Detergent dispenser
8. Lower basket
9. Upper spray arm
10. Upper basket
11. Third basket

The graphics is a general overview. For more details, refer to other chapters or documents provided with the appliance.

Control Panel

• A: ON/OFF button
• B: EXPRESS button
• C: DELAY START button
• D: ADDISH light
• E: PROGRAMME SELECTION button
• F: DISPLAY
• G: TABLET light
• H: HALF LOAD /setup 5-sec button
• I: AUTO DOOR OPEN button
• J: START / OK / reset 3 sec

Display

• A. Indicators
• B. Display

Indicators

Programs

Programme

• Add detergent for prewash
• While the washing program is running, a floor light is projected onto the floor under the dishwasher door.

Options

Express

Delay start

Half load

Open door

• The door will open automatically during the drying phase and you will have to wait for the end-of-cycle signal before removing the dishes.

Basic setting

Enter setup menu

• Press and hold the H button for 5s (only in a selection or at maximum read-only).
• All submenus showed in loop: Tablets–>Softener–>Rinse Aid–>Buzzer.
• Press D to scroll left and right between settings.
• To exit the setup menu press A.

Setup selection
Language

• “LANGUAGE” scrolls endlessly, then after pressing L “ENGLISH” appears first, by default.
• Once confirmed with L, “LANGUAGE” scrolls endlessly.

Tablets

• “TABLETS” scrolls endlessly, then after pressing L “NO” appears first, by default. If activated, the dedicated LED will turn ON till deactivation. Once confirmed with L, “TABLETS” scrolls endlessly.

Softener

• “SOFTENER” scrolls endlessly, then after pressing L “S 4” appears first, by default, then other levels.
• Once confirmed with L, “SOFTENER” scrolls endlessly.

Level| °fH| °dH|
---|---|---|---
0| 0-6| 0-3| S0
1| 7-11| 4-6| S1
2| 12-20| 7-11| S2
3| 21-29| 12-16| S3
4**| 30-39| 17-22| S4
5| 40-48| 23-27| S5
6| 49-59| 28-33| S6
7**| 60-89| 34-50| S7

Appears by default

Rinse Aid

• “RINSE AID” scrolls endlessly, then after pressing L “R X” appears first, by default, then other levels.
• Once confirmed with L, “RINSE AID” scrolls endlessly.

Rinse aid level (multi dosage)|

Meaning

---|---
0| No multi-dosage and rinse aid detection.
1| 1 pulse (1 dose)
2| 2 pulses (2 doses)
3| 3 pulses (3 doses)
4| 4 pulses (4 doses)
5| 5 pulses (5 doses)
6| 6 pulses (6 doses)

Buzzer

• “BUZZER” scrolls endlessly, then after pressing L “YES” appears first, by default.
• Once confirmed with L, “BUZZER” scrolls endlessly.

Before first use

• Depending on the source of the supply, water contains varying amounts of limestone and minerals which are deposited on the dishes leaving whitish stains and marks. The higher the level of these minerals present in the water, the harder the water is.
• The dishwasher is fitted with a water softener unit which, through the use of special regenerating salt, supplies softened water for washing the dishes.
• The degree of hardness of your water can be obtained from your water supply company.

Regulating the water softener
Make sure that the current level of the water softener is adjusted to the hardness of the water supply.

Use the programme Rapid 1h to remove residues from the manufacturing process.

1. Pour 1 litre of water in the salt container.

2. Put 1 kg of salt in the salt container.
   Use rough salt designed for dishwashers only.

3. Fill the rinse aid dispenser.

4. Open the water tap.

5. Select the programme Rapid 1h and close the dishwasher door to start it.

Do not use detergent and do not put dishes in the baskets.

WARNING: Water and salt may come out of the salt container when you fill it. After you fill the salt container, immediately start a programme to prevent corrosion.
If you do not use the appliance, close the water tap.

Troubleshooting

• If you encounter an issue with your appliance, check the “Troubleshooting” chapter in the full version of the User Manual available on: www.ikea.com.

Technical information

DATA

|
---|---
FULL-INTEGRATED
Width x Height x Depth (cm)| 59,8×81,8×55

TECHNICAL DATA (see rating plate)

Link to the EU EPREL database

• The QR code on the energy label supplied with the appliance provides a web link to the registration of this appliance in the EU EPREL database.
• Keep the energy label for reference together with the user manual and all other documents provided with this appliance. It is possible to find information related to the performance of the product in the EU
• EPREL database using the link https://eprel.ec.europa.eu and the model name and product number that you can find on the rating plate of the appliance. Refer to the chapter “Product Description”.
• For more detailed information about the energy label, visit www.theenergylabel.eu.

To download the full version visit www.ikea.com.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>