E-Welink 7-32V Switch Three Mode Wi-Fi Switch User Guide

June 16, 2024
E-Welink

E-Welink 7-32V Switch Three Mode Wi-Fi Switch

E-Welink 7-32V Switch Three Mode Wi-Fi Switch

Parameters

  • Input voltage: DC/AC 7V~32V
  • Max. Current: 2200W / 1 0A/ Gang
  • Wi-Fi Standard: Wi-Fi 2.4ghz b/ g/n
  • Working temperature: -20°C~70°C
  • Material: ABS
  • Size : 116382Smm

Checklist before using the device

  • Your smart phone or tablet has connected to a 2.4g WiFi with internet.
  • You have the correct WiFi PWD.
  • You smart phone or tablet must have access to APP store, Google play.
  • Your router is MAC-open.
    Checklist before using the device

User Guide

  1. Start with ” EWelink” APP.
    EWelink APP

    |

  2. Register an EWlink account.
  3. If you have EWelink acconunt.
  4. just login.
  5. Power up.

ON/OFF operating principle :
The connected appliances work/stop through live wire power on/off.
User Guide
User Guide

On the device, the default call is closed and can be set to call or maintain in the APP change.

Add device flow to mobile APP

  1. After installation ,power the device and long press pairing button(anyone) for 5 seconds until Network indicator blinks quickly( blinking twice and on).

  2. Tap on EWelink app.

  3. Select Quick Pairing .
    special cases You can try compatibility Model (AP)

  4. Input your WiFi password.
    Add device flow to mobile APP

  5. Name your device.
    Add device flow to mobile APP

  6. When the network indicator is on, the device is online.

  7. Click the on/off buttons on the APP can control device, Manual control se itch also can be display real -t ime on the AP P.

Remote control matches the code

Matching:

  1. hold RF pairing button for 3 seconds you want to match ,until blue light is on .
  2. then long press remote control button you want to match.
  3. loosen the remote control buttons, matching success

Clear code:
Long press the RF pairing button for 15 seconds , loosen the RF pairing button until the RF pairing indicator is off.
note: the matching/clear code method is only available with RF function switch/module reference.

TROUBLESHOOTING

Enter the homepage of App, click the icon in the lower right corner of the interface to enter.
“Message” >hits” Guide” ” Profile” >hits” Ewelink support”
Troubleshooting
If none of the above is resolved, please open it with another phone. Personal hotspot. try to readd.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals