EasyPhone EZCF

Quick Set-up Guide

1. Receiver
2. Main Display
3. LSK to confirmation/options
4. RSK to contacts menu/return back to idle display
5. Dial key
6. Reject/end call key
7. Up key to Audio player
8. Down key to alarm
9. M1 to set speed dial
10. M2 to set speed dial
11. Camera key
12. Numeric Key
13. Star/symbol key
14. Press and hold to switch profile mode (Silence/Vibration/General) & symbol # key
15. Input the number 0/press and hold to switch on/off handsfree mode during call
16. SOS button
17. Speaker
18. Earphone jack
19. USB jack
20. Torch key
21. Camera
22. Flashlight
23. Volume +/- key

Inserting a SIM card

1. Remove the battery cover by lifting from the bottom left-hand corner. 1 In Fig A

2. Remove battery to access SIM & SD Memory Slots. Lift the battery from the top to remove it. Fig B

3. 02 SIM.
   Inside there are 3 sizes of SIM available, Standard, Micro and Nano as marked on the SIM hold card. Any size can be used, for ease snap out the Standard size SIM (this is the largest one). If the wrong size is snapped out you can put these all back together to make the larger Standard Sim. 
   

4. To slide a standard sized SIM card into the SIM card holder; insert it with gold contacts facing down and the bevelled corner in the top left. 2 In Fig B

5. If you have a Micro SIM card you can Insert it by sliding the silver cage to the left and lifting it Then insert the card with the gold contacts facing down and close the cage before sliding it to the right. 3 In Fig B

Inserting the Battery
Insert the battery, making sure that battery contacts touch the gold contacts in the bottom right corner, then replace the battery cover and press down until it clicks into place. If the battery is in the correct orientation, the ‘+’ and ‘-’ symbols will be facing you in the bottom right corner.

The mobile will need 10 hours charging before first use. Charge daily – 8 hours or less depending on how much charge is left.
When the phone is powered on, the battery icon will flash to show that it is charging and will show as full when the battery is fully charged. If the phone is powered off ‘charging’ or ‘charge complete’ will appear on the screen.

USING THE PHONE

To turn the phone on, hold down the Power Button (red button) for 5 seconds until the screen comes on. In standby mode, the phone is on but isn’t running any applications such as calling, SMS messaging, etc. You can tell the phone is in standby mode because the screen is on.

Using the Menu
Press Left menu key (top left of the keypad with a solid line) to open the menu.

• Press Up/Down arrow keys to scroll through the menu.
• Press Left menu key to open a menu item.
• To return to standby mode, press Power Button or close the phone.

Dual-function Keys
Some keys have additional functions if they are pressed and held down for a few seconds.

• Number 1 key: Listen to voicemail.

• key: Switch between normal sound, silent mode and vibrate mode.

• Number 0 key: Hold for a few seconds to switch torch on or off.

Saving Contacts to Phonebook
Contacts can be accessed by pressing the right menu key at the top right of the key pad with the solid line.

1. Press Options —► New —► OK (the circular button between the arrow keys).
2. Choose between Phone or SIM to store your contact. press OK
3. To input contacts name, use down arrow key to move the high light Name, then press Edit. Press OK when finished.
4. To input phone number, press the down arrow button to move the highlight to Mobile. press edit, press OK when finish.

Changing the Ringtone
Press the Left Menu key in standby Mode Scroll to and select Settings

1. Select Profiles

2. Select Normal (or your current Profile)

3. Select Option (left menu key) then select Settings and press OK (left menu key)

4. Scroll to and select Ring Settings —► SIM1/SIM2 Call ring —► Select
   You can then change your ring tone for each SIM and for receiving messages.

5. Choose ringtone from Fixed ringtones (comes with the phone) or More ringtones (download from your computer to phone memory or optional Micro SD card).

6. Press OK —► Done to return to the previous menu.

Setting up the SOS function

1. Press the Left Menu key (on keypad).

2. Scroll to and select Settings.

3. Select SOS setting —► OK —► Options (Left menu key) (Ensure Active is ticked to activate the SOS function). Back

4. Select No.1. (if no numbers have been previously programmed it will be empty).

5. Press the Middle button to Edit, and then enter your SOS contact number.

6. Press OK and then Options and scroll to Save Number and press OK.

7. Repeat steps 5-7 to add up to 5 SOS contacts. When activated, the phone will dial the phone numbers in order of entry.

8. You can also add a standard SOS text message to send to your contacts.
   Select Options —► Edit message —► OK.

9. The default SMS is “S0S, Please call me!!” To change this, press the right menu key to clear the message and Edit your own words. Press OK after done.

10. To activate SOS button, press SOS button on back of phone and hold for 3 seconds. A alarm will sound on your phone and a text message/call will be sent to the specified numbers.
    Please note: SOS message will only be sent to mobile phone numbers in the SOS list. SOS calls need to be accepted by the receiver within a specific timeframe. lf you are programming a phone number that has an automatic answering feature please test before use.

Setting up the M1/M2 speed dial
Please note: A valid SIM card needs to be installed in order to set up the Speed dial function

1. Press Menu button (on keypad).
2. Scroll to and select Settings.
3. Scroll to and select Speed dial.
4. Select Option —► Edit —► Input number —► OK.
5. Repeat steps 4 to add up M2 and other Speed dial.

Vibrate Mode
When in standby mode, the phone can be changed to silent mode by pressing and holding the hash (#) key for three seconds. Repeating this step will switch to vibrate mode. Press for anothet 3 seconds and it returns to normal ring mode. To control the volume from standby mode, press the up-arrow key once, then use the arrow keys to adjust the volume.

USING THE PHONE FUNCTIONS

Using the Radio
Press the Left Menu key in standby mode Scroll to and select MULTIMEDIA

1. Select Radio —► OK to open the radio.
2. To play or pause the radio, press the OK button.
3. To swap between radio stations, press the M1 and M2 buttons.

Using the Sound Recorder
Press the Left Menu key in standby mode Scroll to and select MULTIMEDIA

1. Select Sound Recorder —► OK to open the sound recorder.
2. To start and stop the recording, press the OK button.
   Please note: Before saving a recording, a Micro 5D card must be inser Instructions on how to do this are included in the ‘Getting Started” section of the manual.

To take Pictures/Videos
Press the Left Menu key in standby mode Scroll and select MULTIMEDIA

1. Scroll to and select Camera to take pictures, or DV to take videos.
2. Press OK to take a picture when in camera mode. When in DV mode. Press OK once to start recording and press OK again to stop.
3. Images can be accessed by selecting Image in the MULTIMEDIA menu.
   Please note: Before saving photos or videos, a Micro SD card must be inserted. See image on page 1. Insert MICRO SIM card by sliding the silver cage to the left and lifting it.Then insert the card with gold contacts facing down and close the cage before sliding it to the right 3 In Fig B. Slide your Nano SD card in the card holder with contacts facing down 4 In Fig B.

To use the Alarm Clock
To use Text Messaging
Press the Left Menu key in standby mode Scroll to and select MESSAGING

1. A menu will appear with the available text functions.
2. To write a message, select Write —► OK and set the recipients by either typing in their numbers or pressing OK to search from your contacts.
3. To view your incoming messages, select Inbox —► OK. This will display your messages which can be viewed by scrolling to one and pressing OK.
4. To view message your sent messages, select Sent box —► OK. This will display your sent messages which can be viewed by scrolling to one and pressing OK.

Connecting a Bluetooth Device
Press the Left Menu key in standby mode Scroll to and select TOOLS

1. A list of tools will appear. Select Bluetooth —► OK to open the Bluetooth menu.
2. To turn Bluetooth ON or OFF. select Bluetooth —► OK.
3. To allow other devices to see the phone, select Bluetooth visibility —► OK.
4. To connect a new device, select Paired device —► OK —► Add new device —► OK button. Then select Pair —► OK and enter the password displayed on screen of the other device.

To use Calendar
Press the Left Menu key in standby mode Scroll to and select TOOLS

1. A menu will appear. Select the Calendar —► OK button lo open the calendar.
2. To navigate the days, use the up and down arrows and the M1 and M2 keys.
3. Press the OK button to add an event to the calendar and type in the name of the event.
4. Select the date of the event by scrolling to Date with the arrow keys and typing it in with the numbers. The date should be in the format DD/MM/YYYY.
5. To set the time of the event, scroll to Time using the arrow keys and then use the number keys to enter time in a 24hr format.

Trouble Shooting Guide

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>