Virtual Fabric Adapter
Owner’s Manual

Emulex 10GbE Virtual Fabric Adapter

Emulex 10GbE Virtual Fabric Adapter II and III family
Product Guide (withdrawn product)
As server virtualization technology becomes more prevalent within data centers, more dynamic performance is needed for network bandwidth to satisfy these demands. The Emulex 10GbE Virtual Fabric Adapters II and III can help you break the I/O bottleneck by allowing you to allocate bandwidth where it’s needed, delivering maximum application agility. Offering a full range of virtualization and convergence capabilities, the same network hardware offers Ethernet, iSCSI, or Fibre Channel over Ethernet with
a bandwidth that is allocated in increments from 100 Mb to 10 Gb. The Emulex 10GbE Virtual Fabric Adapter II, Emulex Dual Port 10GbE SFP+ VFA III, and Emulex Dual Port 10 GbE SFP+Virtual Fabric Adapter IIIr look the same and are shown in Figure 1.

Figure 1. Emulex VFA II, VFA III and VFA IIIr adapter (shown with optional SFP+ transceivers installed)
Did you know?
With Virtual Fabric, up to eight virtual network ports (vNICs) can be created with a single two-port 10 GbE network adapter. Converged protocols such as iSCSI and FCoE are also supported on selected configurations. By using a common infrastructure for Ethernet and SAN, and by virtualizing your network adapter, you can reduce your infrastructure capital expense.
Click here to check for updates
Emulex 10GbE Virtual Fabric Adapter II and III families (withdrawn product)
Part number information
All adapters in the Emulex 10GbE Virtual Fabric Adapter family listed in Table 1 offer the same features and functions. There is a difference in the manner that they are field-upgradeable from an Ethernet-only-mode of operation to an Ethernet, FCoE and iSCSI mode of operation:
VFA II adapters are designed to use a paper-key license where Lenovo provides licensed security to be used at the Emulex website once registered. Emulex provides the user with a different license key that is subsequently administered to the server.
VFA III and VFA IIIr adapters provide a much easier and more efficient software license enablement process. Lenovo’s Feature on Demand process reduces the complexity of activating the license to just a few clicks of the mouse.
Customers and system designers need to note that VFA II and VFA III adapters, as well as the subset of VFA III PCIe, Integrated, and Mezzanine form factors have different FCoE license key part numbers.
Withdrawn: The adapters described in this product guide are now withdrawn from the marketing
Table 1. Ordering part number and feature code

VFA III adapters for System x M4 and X6 servers
Emulex Dual Port 10GbE SFP+ VFA III| 95Y3762| A2U1
Emulex Dual Port 10GbE SFP+ Integrated VFA III| SBB 95Y3768| A2UN
Emulex Dual Port 10 GbE SFP+ Virtual Fabric Adapter IIIr| 00D8540| A4XH
Emulex VFA III/IIIr FCoE/iSCSI License for (FOD)
(Features on Demand upgrade for 95Y3762, SBB 95Y3768, and 00D8540)| 95Y3760| A2U2
Embedded VFA III adapters for System x M4 servers (do not consume a regular PCIe slot)
Emulex Dual Port 10GbE SFP+ Embedded Adapter| 90Y6456| A22J
Emulex Dual Port 10 GbE SFP+ Embedded VFA IIIr| 00Y7730| A4MC
Emulex Mezz VFA III/IIIr FCoE/iSCSI License for (FoD) (Features on Demand upgrade for 90Y6456 and 00Y7730)| 90Y5178| A2TE
VFA II adapters for System x M3 and X5 servers
Emulex 10GbE Virtual Fabric Adapter II| 49Y7950| A18Z
Emulex 10GbE Integrated Virtual Fabric Adapter II| SBB 49Y7940#| A148
Emulex VFA II FCoE/iSCSI License (for 49Y7950 and SBB 49Y7940)| 49Y4274| 5715
Emulex Dual-port VFA II Adapter and FCoE/iSCSI License| 95Y3751| A348

• This adapter can only be ordered via the configure-to-order (CTO) processor or via special bid.

  This adapter comes standard with most models of the System x3850 X5, x3950

  X5 and x3690 X5. It can also can be ordered via CTO or via special bid for those systems only.

The adapters, when shipped as stand-alone options, include the following items:

• One Emulex 10 GbE Virtual Fabric Adapter
• 3U bracket attached with 2U bracket included in the box (95Y3762, 49Y7950, and 00D8540 only)
• Quick Install Guide
• Warranty Information and Important Notices flyer
• Documentation CD

The Emulex Embedded Adapters are designed to fit into a special slot in selected servers (see Table 4), allowing you to use the PCIe slots for other technologies. The adapters are shown in Figure 2.Emulex 10GbE Virtual Fabric Adapter II and III family (withdrawn product)

The Emulex 10GbE Integrated Virtual Fabric Adapter II (Figure 3) has the same functional characteristics as the Emulex 10GbE Virtual Fabric Adapter II (Figure 1). This adapter must be purchased at the same time as the server. It is factory installed into a standard PCIe slot, and is offered at a price savings compared to the Emulex 10GbE Virtual Fabric Adapter II . There is a limit of one Emulex 10GbE Integrated Virtual Fabric Adapter II per system. The Emulex 10GbE Integrated Virtual Fabric Adapter II is shown in Figure 3. Figure 3. Emulex 10GbE Integrated Virtual Fabric Adapter II (without optional SFP+ transceivers)
Similarly, the Emulex Dual Port 10GbE SFP+ Integrated VFA III has the same functional characteristics as the Emulex Dual Port 10GbE SFP+ VFA III. The integrated adapter must be purchased at the same time as the new supported server (see Table 4). The integrated adapter is factory installed into a standard PCIe slot, and is offered at price savings compared to the Emulex Dual Port 10GbE SFP+ VFA III. There is a limit of one Emulex Dual Port 10GbE SFP+ Integrated VFA III per system.
Supported transceivers and direct-attach cables
The Emulex 10 GbE Virtual Fabric Adapters have two empty SFP+ cages that support SFP+ SR transceivers and twin-ax direct-attached copper cables as listed in Table 2 and Table 3 respectively. Table 2. Supported transceivers

Table 3. Supported direct-attach cables

Passive direct-attach cables
0.5m Passive DAC SFP+ Cable| 00D6288| A3RG| No| Yes| No
1 m Passive DAC-SFP+ Cable| 90Y9427| A1PH| No| Yes| No
3 m Passive DAC-SFP+ Cable| 90Y9430| A1PJ| No| Yes| No
5 m Passive DAC-SFP+ Cable| 90Y9433| A1PK| No| Yes| No
1m Juniper DAC SFP+ Cable| 68Y6927| 5986| No| No| Yes
3m Juniper DAC SFP+ Cable| 68Y6947| 5987| No| No| Yes
Active direct-attach cables
1m Active DAC SFP+ Cable| 95Y0323| A25A| No| Yes| No
3m Active DAC SFP+ Cable| 95Y0326| A25B| No| Yes| No
5m Active DAC SFP+ Cable| 95Y0329| A25C| No| Yes| No
1m 10GE Twinax Act Copper SFP+| 81Y8295| A18M| Yes| No| Yes
3m 10GE Twinax Act Copper SFP+| 81Y8296| A18N| Yes| No| Yes
5m 10GE Twinax Act Copper SFP+| 81Y8297| A18P| Yes| No| Yes

For a complete list of supported SFP+ transceivers and DAC cables refer to RETAIN tip H203108, Support
list matrix for SFP and Twinax DAC cables – Converged Network Adapters, available from: http://ibm.com/support/entry/portal/docdisplay?lndocid=MIGR-5087884

Features

The members of the Emulex 10 GbE Virtual Fabric Adapter family have the following features and benefits:

• Dual-channel, 10 Gbps Ethernet controller

• Line-rate 10 GbE performance

• 2 SFP+ empty cages to support either SFP+ SR or twin-ax copper connections
  SFP+ SR link is with SFP+ SR optical module with LC connectors
  SFP+ twin-ax copper link is with SFP+ direct attached copper module/cable

• TCIP/IP stateless offloads

• TCP chimney offload

• Hardware parity, CRC, ECC, and other advanced error checking

• PCI Express 2.0 x8 host interface

• Low-profile form-factor or slot-less mezzanine card form-factor design

• IPv4/IPv6 TCP, UDP checksum offload

• VLAN insertion and extraction

• Support for jumbo frames up to 9000 bytes

• Preboot eXecution Environment (PXE) 2.0 network boot support

• Interrupt coalescing

• Load balancing and failover support

• Based on Emulex OneConnect technology and including FCoE and iSCSI support as a feature entitlement upgrade

• Simplifies I/O hardware choices for IT managers

• Maximizes I/O consolidation with high-performance 10GbE ports

• One network infrastructure reduces CapEx

• One management console reduces OpEx

• Leverages existing IT investments

• Deploy and manage this and other Emulex OneConnect-based adapters with OneCommand Manager

The Emulex VFA II, VFA III, and VFA IIIr adapters can be upgraded in the field to enable FCoE and iSCSI hardware initiator. Option part number 95Y3751 already has the upgrade installed in the factory. You can deploy faster and manage less when you combine Virtual Fabric adapters (VFAs) and Host Bus Adapters (HBAs) that are developed by Emulex. Lenovo VFAs and HBAs that are developed by Emulex use the same installation and configuration process, streamlining the effort to get your server running, and saving you valuable time. They also use the same Fibre Channel drivers, reducing time to qualify and manage storage connectivity. With Emulex’s OneCommand Manager, you can manage Lenovo VFAs and HBAs that are developed by Emulex through the data center from a single console.

Server support

The Emulex 10GbE Virtual Fabric Adapter family are supported in the servers listed in the following tables.
Support for System x and dense servers with Xeon E5/E7 v4 and E3 v5 processors
Table 4. Support for System x and dense servers with Xeon E5/E7 v4 and E3 v5 processors

Part number| Description| x3250 M6 (3943)| x3250 M6 (3633)| x3550 M5 (8869)| x3650 M5 (8871)| x3850 X6/x3950 X6 (6241, E7 v4)| nx360 M5 (5465, E5-2600 v4)| sd350 (5493)
---|---|---|---|---|---|---|---|---
95Y3762| Emulex Dual Port 10GbE SFP+ VFA III| N| N| N| N| N| N| N
95Y3768#| Emulex Dual Port 10GbE SFP+ Integrated VFA III| N| N| N| N| N| N| N
00D8540| Emulex Dual Port 10GbE SFP+ VFA IIIr| N| N| N| N| N| N| N
95Y3760| Emulex VFA III/IIIr FCoE/iSCSI License (FoD)| N| N| N| N| N| N| N
90Y6456| Emulex Dual Port 10GbE SFP+ Embedded Adapter| N| N| N| N| N| N| N
00Y7730| Emulex Dual Port 10GbE SFP+ Embedded VFA IIIr| N| N| N| N| N| N| N
90Y5178| Emulex Mezz VFA III/IIIr FCoE/iSCSI License (FoD)| N| N| N| N| N| N| N
49Y7950| Emulex 10GbE Virtual Fabric Adapter II| N| N| N| N| N| N| N
49Y7940#| Emulex 10GbE Integrated Virtual Fabric Adapter II| N| N| N| N| N| N| N
49Y4274| Emulex VFA II FCoE/iSCSI License| N| N| N| N| N| N| N
95Y3751| Emulex Dual Port VFAII Adapter & FCoE/iSCSI License| N| N| N| N| N| N| N

Support for servers with Intel Xeon v3 processors
Table 5. Support for servers with Intel Xeon v3 processors

Part number| Description| x3100 M5 (5457)| x3250 M5 (5458)| x3500 M5 (5464)| x3550 M5 (5463)| x3650 M5 (5462)| x3850 X6/x3950 X6 (6241, E7 v3)| nx360 M5 (5465)
---|---|---|---|---|---|---|---|---
95Y3762| Emulex Dual Port 10GbE SFP+ VFA III| N| N| N| N| N| N| N
95Y3768#| Emulex Dual Port 10GbE SFP+ Integrated VFA III| N| N| N| N| N| N| N
00D8540| Emulex Dual Port 10GbE SFP+ VFA IIIr| Y| N| N| N| N| Y| N
95Y3760| Emulex VFA III/IIIr FCoE/iSCSI License (FoD)| Y| N| N| N| N| Y| N
90Y6456| Emulex Dual Port 10GbE SFP+ Embedded Adapter| N| N| N| N| N| N| N
00Y7730| Emulex Dual Port 10GbE SFP+ Embedded VFA IIIr| N| N| N| N| N| N| N
90Y5178| Emulex Mezz VFA III/IIIr FCoE/iSCSI License (FoD)| N| N| N| N| N| N| N
49Y7950| Emulex 10GbE Virtual Fabric Adapter II| N| N| N| N| N| N| N
49Y7940#| Emulex 10GbE Integrated Virtual Fabric Adapter II| N| N| N| N| N| N| N
49Y4274| Emulex VFA II FCoE/iSCSI License| N| N| N| N| N| N| N
95Y3751| Emulex Dual Port VFAII Adapter & FCoE/iSCSI License| N| N| N| N| N| N| N

Support for servers with Intel Xeon v2 processors
Table 6. Support for servers with Intel Xeon v2 processors

Part number| Description| x3500 M4 (7383, E5-2600 v2)| x3530 M4 (7160, E5-2400 v2)| x3550 M4 (7914, E5-2600 v2)| x3630 M4 (7158, E5-2400 v2)| x3650 M4 (7915, E5-2600 v2)| x3650 M4 BD (5466)| x3650 M4 HD (5460)| x3750 M4 (8752)| x3750 M4 (8753)| x3850 X6/x3950 X6 (3837)| x3850 X6/x3950 X6 (6241, E7 v2)| dx360 M4 (E5-2600 v2)| nx360 M4 (5455)
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---
95Y3762| Emulex Dual Port 10GbE SFP+ VFA III| N| N| N| N| N| N| N| N| N| N| N| N| N
95Y3768#| Emulex Dual Port 10GbE SFP+ Integrated VFA III| N| N| N| N| N| N| N| N| N| N| N| N| N
00D8540| Emulex Dual Port 10GbE SFP+ VFA IIIr| Y| Y| Y| Y| Y| Y| Y| Y| Y| Y| Y| Y| Y
95Y3760| Emulex VFA III/IIIr FCoE/iSCSI License (FoD)| Y| Y| Y| Y| Y| Y| Y| Y| Y| Y| Y| Y| Y
90Y6456| Emulex Dual Port 10GbE SFP+ Embedded Adapter| N| N| N| N| N| N| N| N| N| N| N| N| N
00Y7730| Emulex Dual Port 10GbE SFP+ Embedded VFA IIIr| N| N| Y| N| Y| N| Y| N| N| N| N| Y| Y
90Y5178| Emulex Mezz VFA III/IIIr FCoE/iSCSI License (FoD)| N| N| Y| N| Y| N| Y| N| N| N| N| Y| Y
49Y7950| Emulex 10GbE Virtual Fabric Adapter II| N| N| N| N| N| N| N| N| N| N| N| N| N
49Y7940#| Emulex 10GbE Integrated Virtual Fabric Adapter II| N| N| N| N| N| N| N| N| N| N| N| N| N
49Y4274| Emulex VFA II FCoE/iSCSI License| N| N| N| N| N| N| N| N| N| N| N| N| N
95Y3751| Emulex Dual Port VFAII Adapter & FCoE/iSCSI License| N| N| N| N| N| N| N| N| N| N| N| N| N

Support for servers with Intel Xeon v1 processors
Table 7. Support for servers with Intel Xeon v1 processors

Part number| Description| x3100 M4 (2582)| x3250 M4 (2583)| x3300 M4 (7382)| x3500 M4 (7383, E5-2600)| x3530 M4 (7160, E5-2400)| x3550 M4 (7914, E5-2600)| x3630 M4 (7158, E5-2400)| x3650 M4 (7915, E5-2600)| x3690 X5 (7147)| x3750 M4 (8722)| x3850 X5 (7143)| dx360 M4 (7912, E5-2600)
---|---|---|---|---|---|---|---|---|---|---|---|---|---
95Y3762| Emulex Dual Port 10GbE SFP+ VFA III| N| N| Y| Y| Y| Y| Y| Y| N| Y| N| Y
95Y3768#| Emulex Dual Port 10GbE SFP+ Integrated VFA III| N| N| Y| Y| Y| N| Y| N| N| N| N| N
00D8540| Emulex Dual Port 10GbE SFP+ VFA IIIr| N| N| N| N| N| N| N| N| N| N| N| N
95Y3760| Emulex VFA III/IIIr FCoE/iSCSI License (FoD)| N| N| Y| Y| Y| Y| Y| Y| N| Y| N| N
90Y6456| Emulex Dual Port 10GbE SFP+ Embedded Adapter| N| N| N| N| N| Y| N| Y| N| N| N| Y
00Y7730| Emulex Dual Port 10GbE SFP+ Embedded VFA IIIr| N| N| N| N| N| N| N| N| N| N| N| N
90Y5178| Emulex Mezz VFA III/IIIr FCoE/iSCSI License (FoD)| N| N| N| N| N| Y| N| Y| N| N| N| Y
49Y7950| Emulex 10GbE Virtual Fabric Adapter II| N| N| N| N| N| N| N| N| Y| N| Y| Y
49Y7940#| Emulex 10GbE Integrated Virtual Fabric Adapter II| N| N| N| N| N| N| N| N| Y| N| Y| N
49Y4274| Emulex VFA II FCoE/iSCSI License| N| N| N| N| N| N| N| N| Y| N| Y| N
95Y3751| Emulex Dual Port VFAII Adapter & FCoE/iSCSI License| N| N| N| N| N| N| N| N| Y| N| Y| N

See ServerProven® for the latest information about the System x servers that support this adapter including support for older servers: http://www.lenovo.com/us/en/serverproven/xseries/lan/matrix.shtml

Modes of operation

The adapters support two types of virtual NIC (vNIC) operating modes, and a physical NIC (pNIC) operating mode:

• Virtual Fabric Mode (also known as vNIC1 mode) will only work with Lenovo RackSwitch switches. In this mode, the Emulex adapter communicates with the Lenovo switch to obtain vNIC parameters (using DCBX). A special tag is added within each data packet and is later removed by the NIC and/or switch for each vNIC group to maintain the separation of the virtual data paths. In vNIC mode, each physical port is divided into four virtual ports for a maximum of eight (8) virtual NICs per adapter. The default bandwidth for each vNIC is 2.5 Gbps. Bandwidth for each vNIC can be configured via the switch from 100 Mbps to 10 Gbps, up to a total of 10 Gb per physical port. The vNICs can also be configured to have 0 bandwidth if you must allocate the available bandwidth to fewer than four vNICs per physical port. In Virtual Fabric Mode, you can change the bandwidth allocations through the switch user interfaces without requiring a reboot of the server. vNIC bandwidth allocation and metering is performed by both the switch and the VFA. In such a case, a bidirectional virtual channel of an assigned bandwidth is established between them for every defined vNIC.

• In Switch Independent Mode (also known as vNIC2 mode) the adapter works with any 10 Gb Ethernet switch. Switch Independent Mode offers the same capabilities as Virtual Fabric Mode in terms of the number of vNICs and the bandwidth each can be configured to have. Switch Independent Mode extends the existing customer VLANs to the virtual NIC interfaces. The IEEE 802.1Q VLAN tag is essential to the separation of the vNIC groups by the NIC adapter or driver and the switch. The VLAN tags are added to the packet by the applications or drivers at each end station rather than by the switch.
  vNIC bandwidth allocation and metering is only performed by VFA itself. In such a case, a unidirectional virtual channel is established where the bandwidth management is only performed for the outgoing traffic on a VFA side (server-to-switch). The incoming traffic (switch-to-server) uses all available physical port bandwidth, as there is no metering performed on either the VFA or a switch side.
  In vNIC2 mode, when storage protocols are enabled on the Emulex 10GbE Virtual Fabric Adapters, six vNICs (three per physical port) are Ethernet, and two vNICs (one per physical port) are either iSCSI or FCoE.

• In panic mode, the adapter operates as a standard dual-port 10 Gbps Ethernet adapter, and it functions with any 10 GbE switch. In panic mode, with the Emulex FCoE/iSCSI License, the card operates in a traditional Converged Network Adapter (CNA) mode with two Ethernet ports and two storage ports (iSCSI or FCoE) available to the operating system.

Although all adapters in the Emulex 10GbE Virtual Fabric Adapter family support pNIC, vNIC1 and vNIC2 modes, the availability of each operating mode is also dependent on the top-of-rack switch and the network or storage protocol used (Ethernet only – no storage protocols, iSCSI or FCoE), as shown in the following table.
Table 8. Available VFA operating modes for Ethernet, iSCSI and FCoE configurations

Supported FCoE configurations are shown in the following table.
Table 9. Supported FCoE configurations

Virtual Fabric adapter| FCoE upgrade| VFA mode| Transit switch| FCF switch| SAN fabric| Storage targets
---|---|---|---|---|---|---
VFA III, 95Y3762 VFA IIIr, 00D8540 Integrated VFA III, SBB 95Y3768| 95Y3760| vNIC1 vNIC2 pNIC| None G8124E G8264| G8264CS| Brocade Cisco MDS| DS8000 DS5000 DS3000 IBM SVC V7000 V3500 / V3700 IBM XIV
vNIC2 pNIC| None G8124E| Brocade VDX 6730| Brocade
Cisco Nexus 5548,

5596

| Cisco MDS
Embedded Adapter, 90Y6456 Embedded VFA IIIr, 00Y7730| 90Y5178| vNIC1 vNIC2 pNIC| None G8124E G8264| G8264CS| Brocade Cisco MDS| DS8000 DS5000 DS3000 IBM SVC V7000 V3500 / V3700 IBM XIV
vNIC2 pNIC| None G8124E| Brocade VDX 6730| Brocade
Cisco Nexus 5548,

5596

| Cisco MDS
VFA II, 49Y7950 VFA II and FCoE/iSCSI License, 95Y3751 Integrated VFA II, SBB 49Y7940| 49Y4274 (not needed for 95Y3751)| vNIC1 vNIC2 pNIC| None G8124E G8264| G8264CS| Brocade

Cisco MDS

| DS8000 DS5000 DS3000 IBM SVC V7000V3500 / V3700 IBM XIV
vNIC2 pNIC| None G8124E| Brocade VDX 6730| Brocade
Cisco Nexus 5548,

5596

| Cisco MDS

Important: Use these tables only as a starting point. Configuration support must be verified through the IBM System Storage® Interoperation Center (SSIC):
http://www.ibm.com/systems/support/storage/ssic
Standards supported
The following IEEE standards are supported:

• IEEE 802.3ae (10 Gbps Ethernet XAUI)
• IEEE 802.1q (VLAN)
• IEEE 802.1Qbb (Priority flow control)
• IEEE 802.1Qaz (ETS and Congestion Management)
• IEEE 802.1p (QoS/CoS)
• IEEE 802.3ad (Link Aggregation)
• IEEE 802.3x (Flow Control)
• ANSI INCITS T11 FC-BB-5 2.0, FC-PI-2, FC-GS-4, FC-TAPE and FCP-3
• PCI Express base spec 2.0, PCI Bus Power Management Interface, rev. 1.2
• Advanced Error Reporting (AER)

Physical specifications

The standard form-factor adapter has the following physical specifications:

• Height: 167 mm (6.6 in)
• Width: 69 mm (2.7 in)
• Depth: 17 mm (0.7 in)

The mezzanine adapter has the following physical specifications:

• Height: 60 mm (2.4 in)
• Width: 160 mm (6.3 in)
• Depth: 17 mm (0.7 in)

Operating environment

This adapter is supported in the following environment:

• Temperature:
• Operating: 0° to 55° C (32° to 131° F)
• Non-operating: -40° to 70° C (-40° to 158° F)
• Humidity: 5 to 95%, non-condensing

Warranty

One-year limited warranty. When installed in a System x server, these cards assume your system’s base warranty and any warranty upgrade.
Supported operating systems
The Emulex 10GbE Virtual Fabric Adapter II and III family support the following operating systems:

• Microsoft Windows Server 2008 R2
• Microsoft Windows Server 2012
• Microsoft Windows Server 2012 R2
• Red Hat Enterprise Linux 5 Server Edition
• Red Hat Enterprise Linux 5 Server with Xen x64 Edition
• Red Hat Enterprise Linux 5 Server x64 Edition
• Red Hat Enterprise Linux 6 Server x64 Edition
• Red Hat Enterprise Linux 7
• SUSE LINUX Enterprise Server 11 for AMD64/EM64T
• SUSE LINUX Enterprise Server 11 for x86
• SUSE LINUX Enterprise Server 11 with Xen for AMD64/EM64T
• SUSE LINUX Enterprise Server 12
• VMware vSphere 5.0 (ESXi)
• VMware vSphere 5.1 (ESXi)
• VMware vSphere 5.5 (ESXi)
• VMware vSphere 6.0 (ESXi)

See ServerProven at http://www.lenovo.com/us/en/serverproven/xseries/lan/matrix.shtml for the latest information about the specific versions and service packs supported. Not all servers support all operating systems and versions.

Related publications

For more information refer to these documents:

• Lenovo product page for System x network adapters
  http://shop.lenovo.com/us/en/systems/servers/options/systemx/networking/

• Emulex 10GbE Virtual Fabric Adapter drivers
  http://www.emulex.com/downloads/oem-qualified/lenovo/system-x-rack-software- kits/

• System x Configuration and Options Guide
  https://support.lenovo.com/documents/SCOD-3ZVQ5W

• Lenovo ServerProven compatibility information for network adapters:
  http://www.lenovo.com/us/en/serverproven/xseries/lan/matrix.shtml

• IBM System Storage Interoperation Center (SSIC)
  http://ibm.com/systems/support/storage/ssic/interoperability.wss

• US Announcement Letter – VFA IIIr adapters
  http://ibm.com/common/ssi/cgi- bin/ssialias?infotype=dd&subtype=ca&&htmlfid=897/ENUS114-044

• US Announcement Letter – VFA III Embedded adapter (x3550 M4 announcement)
  http://ibm.com/common/ssi/cgi- bin/ssialias?infotype=dd&subtype=ca&&htmlfid=897/ENUS112-043

• US Announcement Letter – VFA III adapters (x3500 M4 announcement)
  http://ibm.com/common/ssi/cgi- bin/ssialias?infotype=dd&subtype=ca&&htmlfid=897/ENUS112-023

• US Announcement Letter – VFA II FCoE license
  http://ibm.com/common/ssi/cgi- bin/ssialias?infotype=dd&subtype=ca&&htmlfid=897/ENUS111-223

• US Announcement Letter – VFA II adapter (x3850 X5 announcement)
  http://ibm.com/common/ssi/cgi- bin/ssialias?infotype=dd&subtype=ca&&htmlfid=897/ENUS111-055

Related product families
Product families related to this document are the following:

• 10 Gb Ethernet Connectivity
• Ethernet Adapters

Notices

Lenovo may not offer the products, services, or features discussed in this document in all countries. Consult your local Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only the Lenovo product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any Lenovo intellectual property right may be used instead. However, it is the user’s responsibility to evaluate and verify the operation of any other product, program, or service. Lenovo may have patents or pending patent applications covering the subject matter described in this document. The furnishing of this document does not give you any license to these patents. You can send license inquiries, in writing, to:
Lenovo (United States), Inc.
8001 Development Drive
Morrisville, NC 27560
U.S.A.
Attention: Lenovo Director of Licensing
LENOVO PROVIDES THIS PUBLICATION ”AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some jurisdictions do not allow disclaimers of express or implied warranties in certain transactions, therefore, this statement may not apply to you.
This information could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in new editions of the publication. Lenovo may make improvements and/or changes in the product(s) and/or the program(s) described in this publication at any time without notice.
The products described in this document are not intended for use in implantation or other life support applications where malfunction may result in injury or death to persons. The information contained in this document does not affect or change Lenovo product specifications or warranties. Nothing in this document shall operate as an express or implied license or indemnity under the intellectual property rights of Lenovo or third parties. All information contained in this document was obtained in specific environments and is presented as an illustration. The result obtained in other operating environments may vary. Lenovo may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you.
Any references in this publication to non-Lenovo Web sites are provided for convenience only and do not in any manner serve as an endorsement of those Web sites. The materials at those Web sites are not part of the materials for this Lenovo product, and use of those Web sites is at your own risk. Any performance data contained herein was
determined in a controlled environment. Therefore, the result obtained in other operating environments may vary significantly. Some measurements may have been made on development-level systems and there is no guarantee that these measurements will be the same on generally available systems. Furthermore, some measurements may have been estimated through extrapolation. Actual results may vary. Users of this document should verify the applicable data for their specific environment.
© Copyright Lenovo 2022. All rights reserved.
This document, TIPS0844, was created or updated on October 10, 2017.
Send us your comments in one of the following ways:
Use the online Contact us review form found at: https://lenovopress.com/TIPS0844
Send your comments in an e-mail to: comments@lenovopress.com
This document is available online at https://lenovopress.com/TIPS0844.
Emulex 10GbE Virtual Fabric Adapter II and III families (withdrawn product)

Trademarks
Lenovo and the Lenovo logo are trademarks or registered trademarks of Lenovo in the United States, other
countries, or both. A current list of Lenovo trademarks is available on the Web at https://www.lenovo.com/us/en/legal/copytrade/.
The following terms are trademarks of Lenovo in the United States, other countries, or both:
Lenovo®
RackSwitch
ServerProven®
System x®
X5
The following terms are trademarks of other companies: Intel® and Xeon® are trademarks of Intel Corporation or its subsidiaries.
Linux® is the trademark of Linus Torvalds in the U.S. and other countries.
Microsoft®, Windows Server®, and Windows® are trademarks of Microsoft Corporation in the United States, other countries, or both.
Other company, product, or service names may be trademarks or service marks of others.
Emulex 10GbE Virtual Fabric Adapter II and III family (withdrawn product)

References

• IBM Support
• IBM System Storage Interoperation Center (SSIC)
• Support Documents and Downloads
• IBM System Storage Interoperation Center (SSIC)
• Welcome | ServerProven
• 10 Gb Ethernet Connectivity > Lenovo Press
• Ethernet Adapters > Lenovo Press
• Emulex 10GbE Virtual Fabric Adapter II and III family Product Guide (withdrawn product) > Lenovo Press
• Configuration and Options Guide (COG) - Lenovo x86 Servers - Lenovo Support US
• Copyright and Trademark Information | Lenovo US | Lenovo US

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>