Panasonic WW23D WWAN Module Adapter User Manual

Panasonic WW23D WWAN Module Adapter

Specifications

• Dimensions (H x W x D): Approx. 30mm x 52mm x 2.38mm
• Weight: 9g (max)
• LTE Standard: 3GPP Release 15
• UMTS Standard: 3GPP Release 9
• NR Sub-6 Standard: 3GPP Release 15
• Operating Temperature: -30 to 70 degrees Celsius
• Connector interface: PCIe M.2
• Host interface: USB3.1 etc.

Integration to the End Product

1. Insert WW23D module into PCIe M.2 card connector.
2. Secure the end product using the screw.
3. Insert the Antenna unit into the Antenna connectors of the WW23D module.

GENERAL
This device is the WWAN module adapter, UMTS/LTE/NRSub-6 with carrier aggregation (CA)

Integration to the end product

1. Insert WW23D module into PCIe M.2 card connector.
2. Secure the end of the product using the screw.
3. Insert the Antenna unit into the Antenna connectors of the WW23D module.

Technical Specification

• Dimensions (H x W x D): Approx. 30mm x 52mm x 2.38mm
• Weight: 9g (max)
• LTE Standard: 3GPP Release 15
• UMTS Standard: 3GPP Release 9
• NR Sub-6 Standard: 3GPP Release 15
• Operating Temperature: -30 to 70 degrees Celsius
• Connector interface: PCIe M.2
• Host interface: USB3.1 etc.,

Regulatory Information

RF Exposure Compliance information
The WW23D module will have been granted modular approval for mobile applications. Integrators may use the WW23D module in their final products without additional FCC / ISED (Innovation, Science and Economic Development Canada) certification if they meet the following conditions. Otherwise, additional FCC / ISED approvals must be obtained.

1. At least a 20 cm separation distance between the antenna and the user’s body must be maintained at all times.
2. To comply with FCC / ISED regulations limiting both maximum RF output power and human exposure to RF radiation, the maximum antenna gain including cable loss in a mobile-only exposure condition must not exceed the limits stipulated in Table 1.

Table 1 Antenna Gain and Collocated Radio Transmitter Specifications

 |

Operating mode

|

TX Freq Range (MHz)

| Max Time-Avg

Cond Power

(dBm)

| Antenna Gain Limit (dBi)
---|---|---|---|---
Standalone| Collocated
 |  |  |  |  |  |
WW23D| WCDMA Band 2| 1850| 1910| 24.5| 8.5| 8
WCDMA Band 4| 1710| 1755| 24.5| 5.5| 5.5
WCDMA Band 5| 824| 849| 24.5| 6| 5.5
LTE B2| 1850| 1910| 24| 8.5| 8
LTE B4| 1710| 1755| 24| 5.5| 5.5
LTE B5| 824| 849| 24| 6| 6
LTE B7| 2500| 2570| 24.8| 8| 8
LTE B12| 699| 716| 24| 6| 5.5
LTE B13| 777| 787| 24| 6| 5.5
LTE B14| 788| 798| 24| 6| 6
LTE B17| 704| 716| 24| 6| 5.5
LTE B25| 1850| 1915| 24| 8.5| 8
LTE B26| 814| 849| 24| 6| 6
LTE B30| 2305| 2315| 24| 0| 0
LTE B41| 2496| 2690| 24.8| 7| 7
LTE B41-HPUE| 2496| 2690| 26| 7| 7
LTE B422| 3450| 3550| 24.8| 5| 5
LTE B42/B432| 3450| 3650| 24.8a| -1.8| -1.8
LTE B48| 3550| 3700| 24.8a| -1.8| -1.8
LTE B66| 1710| 1780| 24| 6| 6
LTE B71| 663| 698| 24| 6| 5.5
5G NR n2| 1850| 1910| 24.5| 8.5| 8
5G NR n5| 824| 849| 24.5| 6| 5.5
5G NR n7| 2500| 2570| 24.5| 8| 8
5G NR n12| 699| 716| 24.5| 6| 5
5G NR n25| 1850| 1915| 24.5| 8.5| 8
5G NR n41| 2496| 2690| 24.5| 7| 7

FCC ID: ACJ9TGWW23D IC: 216H-CFWW23D

1. USA only

2. Canada only
   Important: The FCC and IC have a strict EIRP limit in Band 30 for mobile and portable stations to protect adjacent satellite radio, aeronautical mobile telemetry, and deep space network operations. Mobile and portable stations must not have antenna gain exceeding 0 dBi in Band 30. Additionally, both the FCC and IC prohibit the use of external vehicle-mounted antennas for mobile and portable stations in this band. Important: Airborne operations in LTE Band 48 are prohibited.

3. The WW23D module may transmit simultaneously with other collocated radio transmitters within a host device, provided the following conditions are met:

   • Each collocated radio transmitter has been certified by FCC / ISED for mobile application.
   • At least a 20 cm separation distance between the antennas of the collocated transmitters and the user’s body must be maintained at all times.
   • The radiated power of a collocated transmitter must not exceed the EIRP limit stipulated in Table 1.
   • A label must be affixed to the outside of the end product into which the WW23D module is incorporated, with a statement similar to the following:
   • This device contains FCC ID: ACJ9TGWW23D, IC: 216H-CFWW23D

Instructions to OEM Integrators
A user manual with the end product must indicate the operating requirements and conditions that must be observed to ensure compliance with current FCC/ISED RF exposure guidelines. The end product with an embedded WW23D module may also need to pass the FCC Part 15 unintentional emission testing requirements and be properly authorized per FCC Part 15. If this module is intended for use in a portable device, integrators are responsible for separate evaluation and/or approval to satisfy FCC/ISED RF Exposure requirements. If other radio devices are to be integrated with this module, an additional evaluation and FCC/ISED submission may be required. Integrators are responsible for such additional evaluation and FCC/ISED submission.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>