AZZA CSAZ-470 Legionaire Midi Tower Instruction Manual
- June 3, 2024
- AZZA
Table of Contents
CSAZ-470 Legionaire Midi Tower
USER MANULA
Specifications
Model
| Model Name: | Legionnaire |
|---|---|
| Model Number: | CSAZ-470 |
Specifications
| Type: | ATX Mid Tower |
|---|---|
| Color: | Black/Black(interior) |
| Side Panel Window: | Left side panel: slidable iron mesh side panel |
| Max CPU Cooler Height: | UP to 170 mm |
| Max Video Card Length: | Up to 400 mm long video card |
| Power Supply: | Not included |
| Motherboard Compatibility: | E-ATX 、ATX 、Micro ATX 、ITX |
Expansion
| External 5.25″ Drive Bays: | 0 |
|---|---|
| Internal 2.5″ Drive Bays: | Up to 4 |
| Internal 3.5″ Drive Bays: | Up to 2 |
| Expansion Slots: | 7 |
| Top Ports: | The power button, LED button, HD Audio, USB 3.0 x 2 |
Physical Specifications
| Case Dimension (HxWxD) | 483x220x440mm/19×8.7×17.3 inches |
|---|---|
| Weight: | 6.1Kg /13.5lbs |
Features
Mesh side panel:| The full mesh side windows allow for clear visuals to inner
components and increased air intake,
having maximum airflow performance.
---|---
Addressable RGB Light Effects:| ARGB fans are controlled using the LED button.
All addressable RGB devices can sync with the motherboard, allowing the
motherboard software to control lighting directly.
Available Fan Ports:| 3x120mm or 3x140mm fan ports in the front (3x120mm LFO-
3812D addressable ARGB fan included)
3x120mm or 2x140mm fan ports on the top
1x120mm fan port in the rear (1x120mm LFO-3812D addressable ARGB PWM fan
included)
2x120mm fan ports on the Power Supply Shroud
Water Cooling:| Supports radiators up to 280/360mm in the front
Supports radiators up to 240/280mm in the top
Dust Filters:| Removable (magnetic) dustproof net on the top, dust filter on
the bottom of chassis.
Power Supply Support:| Bottom-mounted ATX Power Supply
Chassis Parts
| 1 | Front panel |
|---|---|
| 2 | Metal side panel |
| 3 | Mesh side panel |
| 4 | Removable dust filter |
| 5 | Removable magnetic mesh |
| 6 | 2.5” SSD tray x 2 |
| 7 | Hard disk cage |
| 8 | 3.5” HDD/ 2.5” SSD brackets |
Control Panel Functions
| POWER
---|---
| LED
| Mic
| Audio
| USB 3.0
| USB 3.0
3.5 ˝/ 2.5˝ HDD/SSD Installation
Remove the Front Panel Instructions
Cooling System Installation
Front
Top
Rear
Master Fan & Sub-fan Installation
PSU Fans Installation
Fan Installation
| CONNECTOR| CONNECTION
---|---|---
①| ARGB LED 5V (3pin) female connector| LED Button
②| Reset (LED) S/W (2pin)| The 5V/3pin ARGB socket of the motherboard
③| ARGB LED 5V (3pin) male connector| The master Fan connects to the sub-fan
④| Fan Connector| CHA_FANx socket of the motherboard
⑤| Fan Connector PWM (4pin)| Power Supply
⑥| SANTA| Other 5V/3pin ARGB devices
⑦| Logo ARGB LED connector| The last sub-fan female connector
※Before the fan starts, please make sure the PWM connector and ④SATA connector
⑤each are connected.
※Press the LED button to cycle through different RGB lighting modes, all ARGB
devices are controlled by the LED button. (make sure the other 3pin ARGB
devices are connected with ⑥ )
※Ensure ② insert the motherboard and hold the LED button for 3 seconds to
switch the RGB control function between motherboard RGB software and LED
button.
RGB Lighting Switching
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>