MoriMori LED Lantern Speaker with Dedicated Frosted Glass Instruction Manual
- June 5, 2024
- MoriMori
Table of Contents
MoriMori LED Lantern Speaker with Dedicated Frosted Glass Instruction
Manual
Technical Specification
- Light source : Dimmable LED(0.4W/2000K)
- Luminance: 30lm (at 100%)
- Speaker Power : 5W
- Transmission Type : Bluetooth V5.1
- Dimensions : Ø 110 x 270mm
- Weight : 500g
- Battery specs : Li-ion rechargeable battery 3.7V 1700 mAh
- Battery charge time : 4 hours (DC5V-1A/TYPE C)
- Playing time : Up to 10 hours (at 70% volume & Pop music)
- Lighting time : 8 hours on high / 36 hours on low
- IP Rating : IPX4
- Bluetooth transmission distance : up to 8m
- Pairing : max. 2 units can be paired (only mono)
Indicator status
LED Light:
- press LED button press: on/off
- LED dimming knob: brighter/darker
- LED ON-OFF
Speaker button
Main Parts
How to use, Pairing Bluetooth
Connecting to mobile device
- Press the speaker button until you hear a beep.
- Switch on Bluetooth on mobile device
- Select “LED Lantern Speaker” on the smartphone
- If another signal tone is heard, the connection has been successfully completed.
Bluetooth connection to 2 speakers
- Deactivate Bluetooth on your mobile device!
- Pair the 2 speakers:
- Switch on both speakers (hold the button until you hear a signal).
- To pair, briefly press one of the speaker buttons
- After the signal sounds again, the speakers are paired; one button lights up – red, the other flashes blue.
- Connect the 2 speakers to the mobile device:
- Connect the smartphone to the speaker with a blue Speaker button.
Note
You can change the display name of the lantern in the Bluetooth settings. To do this, click on the info symbol of “LED Lantern Speaker” in the Bluetooth settings of your mobile device.
FCC STATEMENT
Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>