V-TAC VT-8603 20W LED Dome Light Instruction Manual
- June 1, 2024
- V TAC
Table of Contents
V-TAC VT-8603 20W LED Dome Light
Specifications
- Model: VT-8603, VT-8613, VT-8623, VT-8633
- SKU: 801-24, 804-24, 806-24, 812-24
- Beam Angle: >80 degrees
- CRI: DF
- Life Span: 30,000 hours
- Input Voltage: AC:200-240V, 50Hz
- Material: PC
- Dimension: 320x100mm
- Warranty: 5 Year (VT-8603, VT-8613), 3 Year (VT-8623, VT-8633)
Product Usage Instructions
Installation Instructions
- Switch OFF the power before starting the installation.
- Remove the cover by holding the luminaire upside down. Press 3 clips on the sides and pull the base upwards to open and set aside.
- Carefully press and unlock the screw on the LED hinged tray and hold the tray at an upward 90-degree position. Hold the product upside down.
- Hold the product in place, mark & drill the holes into the wall and nail the alligator into the hole. Feed the supply cable into the luminaire through the cable entry hole.
- Switch ON the power to test the light.
Instructions for Changing Color & Power (Available on Driver)
- CCT ON 3000K (Y)
- CCT ON 4000K (WY)
- CCT ON 6400K (W)
Pre-install Emergency Function Test
- Power options: 20W, 16W, 8W
Sensor Settings
Refer to FIG 1, FIG 2, and FIG 3 for sensor settings. Disabled, only the motion sensor will work [FIG 3].
Application [Function Demo – Dimmable Control/Corridor Function]
- When motion is detected but the daylight is sufficient, the light will remain OFF.
- When motion is detected and the daylight is insufficient, the light will be ON.
- After a stand-by period, the light will switch OFF.
FAQ
- Q : How do I reach out for support or queries?
- A : In case of any query/issue with the product, please reach out to us at support@vtacexports.com or visit V-TAC House, Kelpatrick Road, Slough, Berkshire, SL1 6BW, UK.
- Q: What should I do if I encounter an issue with the product?
- A : Contact the manufacturer or a qualified service agent to avoid hazards. Do not dispose of the product with other household wastes.
TECHNICAL DATA
MODEL
| ****
SKU
| BEAM ANGLE| ****
CRI
| ****
DF
| LIFE SPAN (HOURS)| INPUT VOLTAGE| ****
MATERIAl
| ****
DIMENSION
| ****
WARRANTY
---|---|---|---|---|---|---|---|---|---
VT-8603| 801-24| 110°| >80| 0.9| 30,000| AC:200-240V, 50Hz| PC| 320x100mm| 5
Year
VT-8613| 804-24| 110°| >80| 0.9| 30,000| AC:200-240V, 50Hz| PC| 320x100mm| 5
Year
VT-8623| 806-24| 110°| >80| 0.9| 30,000| AC:200-240V, 50Hz| PC| 320x100mm| 3
Year
VT-8633| 812-24| 110°| >80| 0.9| 30,000| AC:200-240V, 50Hz| PC| 320x100mm| 3
Year
SPECIFICATIONS
SENSOR SPECIFICATIONS
MODEL
| DETECTION ANGLE| DETECTION DISTANCE| DETECTION RANGE MAX.| ****
HOLD TIME
| DAYLIGHT SENSOR| MANUAL OVERRIDE| DETECTION
MOTION SPEED
---|---|---|---|---|---|---|---
VT-8613 VT-8633
| 360° If Ceiling Mounting 120° If Wall mounting| ****
3-6 M
| ****
D6Mx3M
| ****
5s, 30s,90s,
3min,20min,30min
| ****
Day, 2LUX,10LUX-
,25LUX Optional
| ****
Available by dial switch
| ****
0.5-3m/s
EMERGENCY SPECIFICATIONS
MODEL
| EMERGENCY OPERATION TIME| ****
EMERGENCY STANDBY WATTS
| BATTERY CHARGING CURRENT| BATTERY DISCHARGING CURRENT| ****
BATTERY TYPE
| ****
TEST BUTTON
| ****
CHARGING INDICATOR
---|---|---|---|---|---|---|---
VT-8623| >3 Hours| >1.2 Watts| 250mA| 410mA| LiFePO4, 3.2V, 2Ah| With| Green
LED
WARNING
- Please make sure to turn off the power before starting the installation.
- Installation must be performed by a qualified person.
- The light source of this luminaire is not replaceable, when the light source reaches its end of life the whole luminaire should be replaced.
- If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similarly qualified person in order to avoid a hazard.
Caution, Risk of electric shock
This marking indicates that this product should not be disposed of with other
household wastes.
INSTALLATION INSTRUCTIONS
- Switch OFF the power before starting the installation.
- Remove the cover by holding the luminaire upside down. Press 3 clips on the sides pull the base upwards to open it and set it aside.
- Carefully press and unlock the screw on the led hinged tray and hold the tray at an upward 90Degree position. Hold the product upside down.
- Hold the product in place, mark & drill the holes into the wall and nail the alligator into the hole. Feed the supply cable into the luminaire through the cable entry hole
- Once the base is installed, carefully put back the hinged tray by pushing it forward.
- Hold the tray with the base and twist the screw to lock it back.
- Carefully close the cover by aligning with the marked arrows on the base ( Locate the Side conduit) and the cover to avoid breakage while closing.
- Push down from all 3 sides to properly secure the 3 clips on the sides.
- Switch ON the power to test the light.
INSTRUCTIONS FOR CHANGING COLOR & POWER (AVAILABLE ON DRIVER)
PRE-INSTALL EMERGENCY FUNCTION TEST
- Connect the AC cable according to the diagram.
- Press the test button on the driver. The emergency function will be activated, and the charging indication will be off.
- Disconnect the battery pack, the charging indicated LED is off.
NOTE : After installation, allow 36 hours to ensure full battery charge and then interrupt the supply.
SENSOR SETTINGS
- Detection Area – It can be adjusted by combining DIP switches for specific applications [FIG 1].
- Hold Time – Time period during which the light will be ON after the last detection [FIG 2].
- Daylight Threshold – Daylight sensor priors motion sensor. Set Threshold for Specific Needs. If disabled, only the motion sensor will work [FIG 3].
APPLICATION
[FUNCTION DEMO – DIMMABLE CONTROL/CORRIDOR FUNCTION]
- When motion is detected, but the daylight is sufficient, the light will remain OFF.
- When motion is detected, and the daylight is insufficient, the light will be ON.
- After a stand-by period, the light will switch OFF.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>