DAREU A950 Pro Trip Mode Lightweight Gaming Mouse User Manual
- June 13, 2024
- Dareu
Table of Contents
A950 Pro Trip Mode Lightweight Gaming Mouse
**User Manual**
What’s in the box
Parameter
Basic parameter
| Working mode | 2.4G+BT+wired |
|---|---|
| L/R button | GM, 8.0, 80M clicks |
| Button material | PBT |
| Click force | 70±20gf |
| Weight | 55±1g |
| Cable | 1.5m |
| Size | 122%498mm |
| Battery | 300mAh |
| Support OS | WinX/Win7/Win10/VVin11/Mac os 10/ Max OS 11 and later |
Electronic parameter
| Sensor | PAW3395 |
|---|---|
| Tracking speed | 650IPS |
| Acceleration | SOG |
| DPI | 400/800/1600(default)/3200/6400 dpi |
| Report rate | wired 1000Hz |
| Working current | wired 15mA |
| Charge time | 40 mins |
| Working time | 4K appr. 6d ays; BT 37 days |
Product views
Indicator
DPI Color
The DPI key can realize five-speed free switching
- 400 DPI – Red
- 800 DPI – Blue
- 1600 DPI {default) – Green
- 3200 DPI – Yellow
- 6400 DPI – Purple
*More DPI adjustments can be achieved through drivers.
How to connect
- Switch bottom button to 2.4G made;
- Plug the receiver into the computer to use.
*The default report rate is IOOO Hz, which can be adjusted to a maximum of 4000Hz through DAREU driver.
- Switch to BT mode;
- Long press the BT pairing button for 3 seconds, the indicator light flashes quickly;
- Turn on the device BT and search mouse;
- Pairing and connection.
How to use driver
Download driver from Dareu’s official website
(www.dareu.com) and install it.
Driver interface
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
Mfgr.: Dongguan Togran Electronics Technology Co., Ltd
Add.: No. 110, Shidan Rd, Shijie Town, Dongguan City,
Guangdong Province, China 523290
Tel: +86 769 86308806 Fax: +86 769 86308826
Email: [email protected]
[email protected]
Web: www.dareu.com