Baseus PB4050Z-P0A1 Magnetic Mini Wireless Fast Charging Power Bank User Manual
- June 1, 2024
- Baseus
Table of Contents
Baseus PB4050Z-P0A1 Magnetic Mini Wireless Fast Charging Power Bank User
Manual
Safety tips and warnings
Improper use of the product may result in the battery not operating properly or causing severe overheating, which could result in a fire or explosion. To avoid personal injury and property damage, please follow the instructions below when using and storing this product.
- This is NOT a toy! Please place this product in areas that are not easily accessible by children. Do not allow children to operate this product, or accidents may occur.
- Please charge this product with a charger approved by the local safety standards in case of danger or damage.
- DO NOT apply pressure, and avoid collisions. The battery and circuit may be damaged if this product falls from a great height, experiences intense shocks, or is immersed in liquid; if so, please avoid using this product.
- If this product suffers from deformation, leakage, or radical decline in performance, please stop using this product.
- Please DO NOT charge any device or recharge this product in places that may affect its heat dissipation, such as pants pockets, enclosed bags, beds, or couches. And ensure this product is not under any cover when operating. When charging other devices for prolonged periods, DO NOT stack any device on top of this product, or it might affect its heat dissipation.
- This product CAN NOT be disassembled, applied pressure, pierced, short-circuited, immersed in liquid, disposed of in a fire, or exposed to a high temperature or heat source with a temperature greater than 140°F (60°C).
- DO NOT place this product in areas with extremely high temperatures. Such as under direct sunlight or in a vehicle with a very high interior temperature.
- This product contains lithium batteries, DO NOT disassemble it! Or danger or battery damage may occur.
Attention
-
1. Please fully charge this device before using it for the first time. - The power banks have conversion efficiency, so the battery capacity of power bank is not equal to the rechargeable capacity.
- Please choose an appropriate charger for recharging this product and suitable cables when charging other devices.
- Please ensure some supervision is in progress when recharging this product, DO NOT charge this product without any care.
- Please remove the cable when done recharging this product or finished charging for any other device to preserve the product integrity.
- If the indication does not light up after pressing the power button, please recharge this product.
- Please preserve this product with a battery percentage between 25%-50% for long-term storage. Place this product in a cool and dry environment. To slow down battery aging, avoid storing this product in an empty or full charge for long term storage.
- Please DO NOT dismantle the product by yourself. Improper use or placement may compromise the service life or damage the product, to which our company will not bear any legal responsibilities nor offer any guarantee. Please understand.
- There mustn’t be any metal objects or materials (like iron plates, rings, metal phone case, etc) between the back of the charging phone and the charging area during wireless charging.
- During wireless charging, if disconnection or serious overheating occurs, it may be that the receiving coil of the charging phone is not completely aligned with the wireless charging coil, or if there is metal object in the phone case. Please try to cool down the phone first, remove the protecting case, and then align it to the correct position.
Specifications
- Name: Power Bank
- Model No.: PPCXM06A
- Battery: Polymer Lithium Battery
- Power Capacity: 6000mAh / 22.2Wh
- Energy Conversion Rate: ≥ 75%
- Type-C Input: 5V-3A; 9V-2A
- Type-C Output: 5V-2.4A; 9V-2.22A; 12V-1.5A
- Wireless Output: 5W/7.5W/10W/15W
- Total Output: 5V-2.4A
- Product Size: 98.4 X 63.9 X 16.3mm
- Product Weight: About 146.5oz
Content
-
* **Power bank** X1- User manual X 1
-
Warranty card X1
-
Charging cable X1
Product Schematic Design
Product Description
This product is a portable charging device that can provide wired and wireless charging for mobile phones, tablets, game consoles and other digital products. The product has auto-alignment for magnetic charging, and supports Apple 20W PD fast charging, Type-C dual-way fast charging, 15W wireless fast charging, etc. It has built-in FOD, overcharge, over-discharge, temperature protection and other safety protection circuits.
Use Environment
Working temperature: non-tropical areas, 0°C to 25 °C
Storage temperature: 0°C to 40°C
Icon Description
The 5-year icon refers to the “valid period for environment-friendly use”, not the product quality assurance period. All electronic products contain toxic and harmful substances such as lead, mercury and cadmium. The overdue use of these products may lead to leakage or mutation of these toxic and harmful substances, causing environment pollution or serious damage to people and property. The term of “environment-friendly use period” means that all electronic products shall be used within this validity period. We won’t be held liable for safety issues caused by using of the product beyond its safe service life.
Statement on Toxic and Hazardous Substances in Electronic Information
Products
| Part Description | Toxic or hazardous substances and elements |
|---|---|
| Lead (pb) | Mercury (Hg) |
| chromium (cry!) | Polybrominated biphenyls (PBB) |
Polybrominated
diphenyt ethers
(PBDE)
PCB| X| 0| 0| 0| 0| 0
Plastic| 0| 0| 0| 0| 0| 0
Metal| X| 0| 0| 0| 0| 0
Accessory| 0| 0| 0| 0| 0| 0
Declaration of Conformity
Shenzhen Baseus Technology Co., Ltd. declares that the product is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.eu.baseus.com This product can be used across EU member states.
This equipment complies with the provisions of Directive 2012/19/EU and Directive 2006/66/EC & 2013/56/EU. It is strictly forbidden to dispose of this equipment with ordinary trash. It must be recycled. This symbol indicates that the product shall not be treated as regular domestic trash, and must be delivered to a recycling center that is capable of recycling electronic and electrical equipment.
FCC ID: 2A482-PPCXM06A
Warning
Prohibited from disassembling, impacting, squeezing, or putting in fire. If
severe swelling occurs, do not continue to use. Do not place in high-
temperature environment. Prohibited from use after immersion in water
Manufacturer: Shenzhen Baseus Technology Co., Ltd. Add: 2nd Floor, Building
B, Baseus Intelligence Park, No.2008, Xuegang Rd, Gangtou Community, Bantian
Street, Longgang District, Shenzhen Executive Standard: GB4943.1; GB31241
Hotline: +1 800 220 8056 Website:
https://www.baseus.com Official After-sales E-mail
Address: care@baseus.com
Designed by Baseus
Made in China
PB4437Z-POAO
1100006352
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>