CPVan Cp6 WiFi Home Alarm System User Manual

June 7, 2024
CPVan

CPVan lOGO

CPVan Cp6 WiFi Home Alarm System

Cp6 WiFi Home Alarm System Manual

Specifications:

Power Input DC 5V / 2A
Standby current: ≤150mA;
Alarming current : ≤350mA;
WIFI Standard: 802.11 b/g/n
Backup Battery: 4.2V 300mAH rechargeable Lithium battery.
Standby duration: 4 hours
Fully charged time: 5 hours.
Wired Siren volume: 120DB (The default beep time is 180s whenalarm);
Alarm Host RF receiving frequency: 433MHz(±75KHz), Supported accessories: 8

remote controllers, 24wireless detectors;
Working temperature:| -10 ~+50

Main Features:

  1. On-site high-decibel alarm, flashing lights, push alert notifications to your phone.
  2. All accessories are configured, easy to use.
  3. Home Arm, Away Arm, Disarm
  4. Low-battery detection
  5. System power-off detection.
  6. Tamper detection.
  7. Built-in battery.

Modes Instruction:

Arm: alarm with sound and light flash
Home Arm: only light flash to alarm
Disarm: only SOS alarm available
Volume: high / medium / low
Beep time: 1-180 seconds adjustable
Timing control: arm / home arm / disarm

Panel function introduction:

① Arm Button(Arm Mode)
②Home Arm Button(At Home)
③Disarm Button(Disarm Mode)
④Accessories list (Add&Edit accessories)
⑤Indicator Switch (Indicator On/Off )
⑥Voice Switch(Alarm Voice On/Off)
⑦Alarm Time(Alarm Duration Setting)
⑧Alarm Volume(Adjust Volume)
⑨Timer(Scheduled an arm, disarm or home mode)
⑩Reset User Data(delete user setting data)| ![CPVan Cp6 WiFi Home Alarm System

How to connect with your phone:

Connection Method 1: WiFi mode

1.Download Smart Life App and Register
Download APP: scan the QR code below to download and install.Register and log in: open the “Smart Life” APP to register and log in according to the prompts.

http://smartapp.tuya.com/smartlife?from=singlemessage&isappinstalled=0

1. Bind your CP6 alarm system with your Smart Life APP
2.1 Open the “Smart Life” APP, click the “+” in the upper right corner of the main screen.
2.2 Choose the “Security&Sensor”, Click “Alarm” to add the alarm.

CPVan Cp6 WiFi Home Alarm System - Open

2.3 Use the Pin(in the package)Press the reset hole of the wifi siren for 1 time to enter the connection mode, then the indicator flashes quickly.
2.4 Click the “Confirm indicator rapidly blink” enter connecting mode.
CPVan Cp6 WiFi Home Alarm System - Confirm indicator
2.5 If the mobile phone is not connected to Wi-Fi, please click “Connect to Wi-Fi”(Figure 5)
2.6 Click “Confirm”

CPVan Cp6 WiFi Home Alarm System - Confirm

2.7 “Connecting”
2.8 When the progress reaches 100%, connection completed, and click “Done”

CPVan Cp6 WiFi Home Alarm System - connection
completed

2.9 Then jump to preview interface

CPVan Cp6 WiFi Home Alarm System - preview interface

Connection Method 2: AP mode

3.1 Open the “Smart Life” APP, click the “+” in the upper right corner of the main screen
3.2 Choose the “Security&Sensor”, Click “Alarm” (Figure 02) to add the alarm.

CPVan Cp6 WiFi Home Alarm System - Security&Sensor

3.3 Click on “AP Mode” at the top right of the app.
3.4 Re-open the wifi siren switch, reconnect the power, the indicator light flashes quickly, press and hold the Reset button for 5 seconds, the indicator light flashes slowly, ready to connect.

CPVan Cp6 WiFi Home Alarm System - Re-open

3.5 Click “Confirm indicator slowly blink” to enter the network password, click “OK” and go connect.

CPVan Cp6 WiFi Home Alarm System - and go connect

3.6 Find the “Smart Life-XXXX” in the WiFi list of your mobile phone and click connect, then return to the “Smart Life ”APP.
3.7 Then the page will jump to the connecting page

CPVan Cp6 WiFi Home Alarm System - connecting page

3.8 When the progress reaches 100%, connection completed, and click “Done”
3.9 Then jump to preview interface

CPVan Cp6 WiFi Home Alarm System - preview interface1

How do add more accessories into the system?

Method 1: Add accessories via APP
① Click on the Panel page of system “accessories”, select the “Detector” or “Remote” then click “Add”, you can only add 1 accessory per time.

CPVan Cp6 WiFi Home Alarm System - accessories via APP

② Click OK enter to the pairing mode, then the wifi siren indicator is solid red light.

CPVan Cp6 WiFi Home Alarm System - solid red light

③ Trigger fitting alignment
④ How to trigger the corresponding accessories to code in pairing mode:
Door Sensor: Move the 2 parts over 2cm away from each other to send code. The indicator is light.
Remote: Press any button on the remote to send code.
PIR Detector: Turn on the switch, indicator light flashes, and send code.
Doorbell: Press the doorbell button for send code.
⑤The siren indicator flash 3 times quickly, added successfully.
Method 2: Add accessories into the system directly
Press the Reset hole, the indicator light keeps on, then trigger the detector sensors, the wifi siren indicator light flashes 3 times, adding successfully.

**How to connect and control your CPVAN CP6 WiFi Alarm System with Alexa

Echo?**

Step1. Add your alarm system in your “Smart Life” APP
If you have logged in-app and the alarm system was bind, the alarm is named in English. Please skip the step.
Step 2. Configure Alexa Echo & Enable “Smart Life” Skill
A. You can configure your Amazon Echo device on Alexa App on your mobile phone.
B. Download Alexa App: Search and Install the “Alexa” App on Google Play or the Apple App Store.
2.1
(a) Make sure your Echo is power on.
(b) Make sure your Echo is connecting with the wireless network.
(c) Turn on your Echo and log in to your Amazon account
(d) Open the “Alexa” app on your phone, and enter your Amazon account and password, click” Sign in”.
2.2 Bind “Smart Life “ with Echo
(a) Click the “Skills” option in the Alexa App Menu on your phone. Search “Smart Life”, Click the “Enable” to enable skill.

CPVan Cp6 WiFi Home Alarm System - Alexa App Menu

(b) Then enter your “Smart Life” username and password, and select your country. Click “Link Now”.

CPVan Cp6 WiFi Home Alarm System - select your country

Step3. Control your CPVAN WiFi Alarm System on Echo
After the above steps are completed, you can do this:
Say “Alexa, disarm the XXX” enter disarm mode.
Say “Alexa, arm the XXX” enter arm mode.
Say “Alexa, arm the XXX in home mode” enter home arm mode
XXX is the device name in your smart life APP.

How to install the alarm system?

  1. Install the WiFi siren:
    Move the bracket to ( ) direction, take out the bracket and fix it with a screw, install the siren body to the bracket, and rotate it to ( )direction.
    CPVan Cp6 WiFi Home Alarm System - install the alarm

  2. Install the Door sensor
    CPVan Cp6 WiFi Home Alarm System - Door sensor
    ① The gap between the magnet and the sensor should be less than 10mm.
    ②After the installation, if the indicator light of the detector is on when the door is opened, it proves it is installed successfully
    ③If the indicate light of the door detector flashes when it is triggered, it means the battery of the sensor is in low voltage, and you need to change the battery as soon as possible.
    ④the transmit distance of the detectors is less than 80meters in the open area. Please test the distance before installing. The obstacles will change the transmitting distance.

  3. Install the PIR Motion Detector:
    CPVan Cp6 WiFi Home Alarm System - Motion Detector
    To avoid the false alarm, please pay attention to the following points installing the PIR motion detector:
    ① Do not face the glass door/window.
    ② Do not face the big object which is easy to swing.
    ③ Do not face the cold and heat air vent or cold and heat source.
    ④ The furniture, bonsai, or any other obstacles should be away from the detecting scope.
    ⑤ Do not install 2 or more detectors in the same area or it will cause interference when alarm.
    ⑥ When the detector is triggered and the LED indicator flashes, it means the battery is in low voltage, please change it as soon as possible.
    ⑦ The detecting distance is less than 8meters, the transmitting distance is less than 80meters. Please test the distance after installing. The obstacles will influence the distance.

Questions & Answers

Q: Why do I can not connect the system with my phone?
A: The product only supports the 2.4gHz wireless network, please turn off the 5gHz wireless network channel. When the camera binding with your phone, please make sure your phone and the product are as close as possible with your router.
Q: How can I reset the system?
A: Use the pin(included package) press the reset hole for 5 seconds.
Q: How can I remove the device from Smart Life App?
A: Enter the alarm system page on the app, click the edit button in the upper right corner, then click “Remove Device”.
Q: How to delete the user setting data?
A: Click the Reset User Data on the App panel.

Customer Service

Dear Customer,
Thank you so much for your order!
At CPVAN, We are 100% dedicated to your complete satisfaction. Your feedback and Product Reviews help us provide you and all CPVAN products and Amazon customers with a better product and service.
If you have any queries with your product, please contact us freely, we will respond within 24 hours.
Customer service email: support@cpvans.com
CPVAN
Find more CPVAN products please visit: www.cpvans.com

http://smartapp.tuya.com/smartlife?from=singlemessage&isappinstalled=0

Android/iPhone
www.cpvans.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals