T G TG-332 Portable Wireless Speaker User Manual
- June 1, 2024
- T G
Table of Contents
T G TG-332 Portable Wireless Speaker
Product Information
Specifications:
- Compliance: Part 15 of FCC Rules
- Conditions: Must not cause harmful interference; must accept any received interference
Product Usage Instructions
Compliance with FCC Rules:
Ensure that the device is operated in compliance with Part 15 of the FCC
Rules to prevent harmful interference.
Operating Conditions:
- Avoid causing interference to other devices.
- Accept any interference received by the device.
- Do not use the device in a way that may result in undesired operation.
Modifications:
Do not make any changes or modifications to the device that are not
expressly approved by the responsible party for compliance. Unauthorized
modifications could void the user’s authority to operate the equipment.
Frequently Asked Questions (FAQ)
-
Q: What should I do if the device is causing harmful interference?
A: If you suspect that the device is causing harmful interference, stop using it immediately and contact customer support for assistance. -
Q: How can I ensure compliance with FCC Rules?
A: To ensure compliance, always follow the operating conditions specified in the user manual and avoid making any unauthorized modifications to the device.
PRODUCT SPECIFICATIONS
-
wireless: V5.1
Support: L2CAP/A2DP/AVCTP, can receive AUDIO signal and control the AUDIO device. Support HSP/HFP(Handsfree profile), with HANDS-FREE functions. -
working distance:l0M
-
SNR: 90db
-
Battery: 3.7V about 1200mAh
-
Normal volume playing time: about 1.5 hours
-
speaker driver: C::45mm*2
-
Power: 4O/5W *2
-
Frequency response: 120Hz-20KHz
-
unit size: 686B180mm
-
unit weight: about 375g
(not includ accessories) -
charging:5V/1000mA
-
charging time: about 2h
PRODUCT FEATURE
- lnternational advanced wireless chip and circuit design techniques, support wireless devices.
- With FM function, can search radio station broadcast automatically.
- With Hi-Fi speaker, to make sure the clear and bright sound.
- Support Micro SD card and USB card, play MP3 format audio.
- The wireless working distance is10 meters.
- With AUX line in, can directly connect the outside devices, for example, tablet PC/TV/cell phones.
- Support TWS.
- Volume adjustment can be by Knob and button.
- lt will close automatically after 30 mins if disconnect Wireless .
KEY AND SLOT FUNCTION
-
DC 5V slot: Use the standard Micro USB VB charging cable for power charging.
-
TF slot: It can decode and play MP3 format audio when put TF card into the slot
-
USB slot: It can decode and play MP3 format audio when put the USB card into the slot
-
AUX line in slot: Use the Mini 3.5 head input through outside devices.
-
Power switch: Press long for power on /power off. When play music,(USB card/TF card/Wireless/line in), short press for “play/pause”. In FM mode, press short to search station automatically, press again to stop searching. Under wireless mode with mobile paired, when call coming, press short to answer a call hands-free, press again to hand up, press twice to ring up a call.
-
When play music, Press short for last song, long press to turn down the volume.
-
When play music, press short for next song, long press to turn up the volume.
-
When play music Short press to switch model (USB card/TF card/Wireless/line in/FM).
TWS:Keep the two speaker under Wireless mode without pairing, press the “M” key for 2-3 seconds either of the speaker until hear a hint and meantime the button light stop flashing , now it is TWS mode ,then can paire the mobile.
Press ” M ” key about 3s to cancel TWS function . -
When play music in any modes, the volume of the clockwise knob is increased, and the volume of the counterclockwise knob is decreased.
NOTE: In the FM mode, put in micro charging cable or AUX cable to increase the FM radio signal.
If this speaker crash during use, you can press and hold the power button for 8 seconds to reset and shut down.
USB/TF card pis use FAT32 format
Warning Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.