T G TG-227 Multifunction Mini Home Wireless Speaker User Manual

T G TG-227 Multifunction Mini Home Wireless Speaker

Product Information

• Specifications
  • Compliance: Part 15 of FCCules
  • Conditions: Must not cause harmful interference, must accept any received interference

Product Usage Instructions

• Device Setup
  • Ensure the device is placed on a stable surface and connected to a power source.
• Powering On
  • Press the power button located on the device to turn it on. Wait for the device to initialize.
• Operation
  • Use the controls or interface provided to interact with the device according to your needs.
• Maintenance
  • Regularly clean the device using a soft, dry cloth. Avoid using harsh chemicals or liquids.
• Troubleshooting
  • If you encounter any issues, refer to the user manual for troubleshooting steps or contact customer support.

FAQs

• Q: What should I do if the device stops working suddenly?
  • A: Check the power source and connections. If the issue persists, contact customer support for assistance.
• Q: Can I modify the device on my own?
  • A: No, any changes or modifications not approved may void your authority to operate the equipment.

PRODUCT SPECIFICATIONS

• Wireless: V5.3
• Support: L2CAP/A2DP/AVCTP, can receive an AUDIO signal and control the AUDIO device. Support HSP/HFP(Handsfree profile), with HANDS-FREE functions.
• Working distance: 10M
• SNR: ≥90db
• Battery: 3.7V about 1200mAh
• Normal volume playing time: about 3h
• Speaker driver: 345mm*2
• Power: 42/5W *2
• Frequency response: 120Hz-20KHz
• Unit size: 68.468.4161.5mm
• Unit weight: about 348g (not including accessories)
• Charging: 5V/500mA
• Charging time: about 3h

PRODUCT FEATURE

1. International advanced wireless chip and circuit design techniques, support wireless devices.
2. With the FM function, can search radio station broadcasts automatically.
3. With a Hi-Fi speaker, to make sure a clear and bright sound.
4. Support Micro SD card and USB card, play MP3 format audio.
5. The wireless working distance is 10 meters.
6. With AUX line in, can directly connect the outside devices, for example, tablet PC/TV/cell phones.
7. It will close automatically after 30 minutes if disconnected Wireless
8. A variety of flashing LED lights with different colours, and color lights flash follow the melody.
9. Support TWS.

KEY AND SLOT FUNCTION

1. DC 5V slot: Use the standard Micro USB V8 charging cable for power charging.
2. TF slot: It can decode and play MP3 format audio when put TF card into the slot.
3. USB slot: It can decode and play MP3 format audio when the USB card into the slot.
4. AUX line in the slot: Use the Mini 3.5 head input through outside devices.
5. Power switch: Press long for power on / power off.
   • When playing music, (USB card/TF card/Wireless/line in), short press for “play/pause” In FM mode, press short to search station automatically, and press again to stop searching.  Under wireless mode with mobile paired, when a call comes, short to answer a call hands-free, press again to hand up, press twice to ring up a call.
6. When playing music, Press short for the last song, and long press to turn down the volume.
7. When playing music, press short for the next song, and long press to turn up the volume.
8. When playing music Short press to switch model (USB card/TF card/ Wireless/line in/FM).
   • Double-press for the option of the LED flashing light. triple-press to open/ close the colour light.
   • Keep the two speakers under Wireless mode without pairing, press the “M” key for 2-3 seconds on either of the speakers until hear a hint and meantime the button light stops flashing, now it is TWS mode, then can paire the mobile.
   • Press the “M ” key about 3s to cancel the TWS function.
   • NOTE: In the FM mode, put in a micro charging cable to get a better FM radio station.
   • USB/TF card pls use FAT32 format.

FCC

Warning Statement

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used following the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>